Your cart is empty.
Your cart is empty.Product Description
Precision in Every Turn
At Junreox, we believe that the right tool can turn a good project into a masterpiece. As a professional supplier of high-quality tools, we are committed to helping makers, builders, and professionals alike achieve precision and efficiency in their work. Our products are designed with meticulous attention to detail, ensuring that every cut, drill, and tap meets the highest standards of accuracy. With Junreox, you're not just buying a tool—you're investing in the expertise and innovation that drives us forward.
Join us in crafting a world where every project is a testament to skill and quality！
Warm Reminder for Junreox drill tap and counterbore set
1. Always use cutting oil when drilling metal to extend the life of your bits.
2. Drill carefully and be sure your combination drill tap bit set is perfectly aligned and level for a straight tapped hole.
3. Apply gentle pressure to avoid damaging the tap and drill bit.
4. Begin drilling slowly, then gradually increase speed to maintain control and prevent slippage.
5. Retract and cut the tap & drill combo set before re-cutting for optimal results.
6. Thin drill bits can break easily than thick bits, so drill more carefully while using a thinner drill bit, make sure it is perfectly straight.
Attention: Not suitable for tough or high-hardness metals. Always wear safety glasses for protection.
Versatility for Multiple Applications
This thread drill bit set includes 6 SAE sizes (6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC), allowing you to handle a variety of drilling and tapping needs with just one package. Perfect for projects that require precision and adaptability.
Advantages of Premium Titanium Combination Drill & Taps Bit Set
1) Efficient 3-in-1 Design Tap Combo Drill Bits: Our combination drill bits seamlessly integrate drilling, tapping, and countersinking into one efficient process, eliminating the need to switch tools. Save time, reduce costs, and boost your productivity.
2) User-Friendly Engraving: Each screw tapping bit is clearly marked with its size on the hex shank for quick identification and selection. The hexagonal handle with a tapered end minimizes excessive impact, while the extended back taper prevents over-drilling, protecting your threads from damage.
3) Superior Material Compatibility: Our drill bit and thread tap specially designed for use on aluminum, plastic, wood, fiberglass, and other thin sheet soft metals (thickness less than 1/8 inch). This set is not recommended for high-hardness metals, making it ideal for light to medium-duty tasks.
4) Wide Compatibility: Equipped with a 1/4-inch hex quick-change shank, our drill and tap set is compatible with various power tools, including electric hand drills, impact drills, bench drills, electric screwdrivers, and tap machines. It's the versatile choice for any workshop or DIY environment.
Jo
Reviewed in the United States on February 27, 2025
Nice Item, not sure how long they will last
Jo
Reviewed in the United States on February 27, 2025
Nice Item, not sure how long they will last
AJB
Reviewed in the United States on February 25, 2025
Only tried the 1/4-20, the largest. It broke half way through a piece of 1/4” aluminum plate. I do need to tap the occasional plastic part, maybe the survivors can do that.
AJB
Reviewed in the United States on February 25, 2025
Only tried the 1/4-20, the largest. It broke half way through a piece of 1/4” aluminum plate. I do need to tap the occasional plastic part, maybe the survivors can do that.
TheOneAndOnlyJH
Reviewed in the United States on January 9, 2025
I can't say how well these would work in metal, but they work just fine in ABS, PLA, and PC plastic parts and a piece of wood I tried it in. For thin metal they'd probably be fine with slow speed and cutting fluid, but at There is no case, but I just keep them in the little plastic bag they came in.
TheOneAndOnlyJH
Reviewed in the United States on January 9, 2025
I can't say how well these would work in metal, but they work just fine in ABS, PLA, and PC plastic parts and a piece of wood I tried it in. For thin metal they'd probably be fine with slow speed and cutting fluid, but at There is no case, but I just keep them in the little plastic bag they came in.
Amanda G
Reviewed in the United States on January 3, 2025
Got this set to thread screws for some of my woodworking and other projects. They work well and feel good quality of material. They come loose in a bag which is a packaging miss in my opinion but doesn't take away from the product. Just weird to have bits loose in a bag.
Amanda G
Reviewed in the United States on January 3, 2025
Got this set to thread screws for some of my woodworking and other projects. They work well and feel good quality of material. They come loose in a bag which is a packaging miss in my opinion but doesn't take away from the product. Just weird to have bits loose in a bag.
Average Consumer
Reviewed in the United States on January 16, 2025
That is what I use them for, so I can't comment to other tasks. I use them on thin gauge steel mostly and they get the job done without any fuss.
Average Consumer
Reviewed in the United States on January 16, 2025
That is what I use them for, so I can't comment to other tasks. I use them on thin gauge steel mostly and they get the job done without any fuss.
K. Bushaw
Reviewed in the United States on December 26, 2024
I have not used them yet.I thought I might need them to tap some harder metaland I have managed to avoid having to do that.BUT, their description says for wood, plastic, and soft metals which I assumeprobably means not much harder than aluminum.I am hoping I can at least use them as thread chasers for harder metals.Maybe I will find out some day.
K. Bushaw
Reviewed in the United States on December 26, 2024
I have not used them yet.I thought I might need them to tap some harder metaland I have managed to avoid having to do that.BUT, their description says for wood, plastic, and soft metals which I assumeprobably means not much harder than aluminum.I am hoping I can at least use them as thread chasers for harder metals.Maybe I will find out some day.
James Richters
Reviewed in the United States on December 2, 2024
This is a really great set to have on hand! I'm so glad it has both #10-32 and #10-24 because while I mainly use #10-24, I do end up with quite a few #10-32 as well. These are great for drilling and tapping with one tool once you get a feel for when the drill is going to get through and the tap will start. I have a sequence I like to use with these, I apply a drop of oil, set my drill on its high speed, drill the hole using only enough pressure to get the job done, so I don't accidentally engage the tap, then I remove the bit from the work, set my drill to low speed, apply more oil, then tap the hole. Yes, it takes longer than just drilling and tapping all in one shot, but it's still way faster than using a separate drill and tap, and I feel I have better control doing it this way. It takes excruciatingly long to drill the hole in high speed, and high speed is WAY too fast for tapping, so this twostep method not only lets me run my drill at the speed I want but also allows me to apply more oil for the tap, and that will definitely extend the tool life.These are good for material up to 3/16" thick, and they will barely work for 1/4" material if you are REALLY careful, any thicker than that and you will be trying to engage the tap before the hole is finished being drilled and that just will not work well, you need a lot more rotations per inch of feed for tapping than you do for drilling, so you really can't drill and tap at the exact same time. For thicker material, it's back to the separate drill and tap. I would not recommend these for material any thicker than 3/16, because it's just too close to the tapped portion. Even if you do not want to remove the tool and change speeds on your drill the way I like to, you still have to slow down for the tap in harder materials like steel or you will snap it off immediately, Drilling and Tapping are two VERY different things. I have some of these by other manufacturers that give you quite a bit more drill before you get to the tap, and that's what I prefer. If you are working with softer materials like Aluminum, which would be quite a bit more forgiving, then you might barely make 1/4" thick.
James Richters
Reviewed in the United States on December 2, 2024
This is a really great set to have on hand! I'm so glad it has both #10-32 and #10-24 because while I mainly use #10-24, I do end up with quite a few #10-32 as well. These are great for drilling and tapping with one tool once you get a feel for when the drill is going to get through and the tap will start. I have a sequence I like to use with these, I apply a drop of oil, set my drill on its high speed, drill the hole using only enough pressure to get the job done, so I don't accidentally engage the tap, then I remove the bit from the work, set my drill to low speed, apply more oil, then tap the hole. Yes, it takes longer than just drilling and tapping all in one shot, but it's still way faster than using a separate drill and tap, and I feel I have better control doing it this way. It takes excruciatingly long to drill the hole in high speed, and high speed is WAY too fast for tapping, so this twostep method not only lets me run my drill at the speed I want but also allows me to apply more oil for the tap, and that will definitely extend the tool life.These are good for material up to 3/16" thick, and they will barely work for 1/4" material if you are REALLY careful, any thicker than that and you will be trying to engage the tap before the hole is finished being drilled and that just will not work well, you need a lot more rotations per inch of feed for tapping than you do for drilling, so you really can't drill and tap at the exact same time. For thicker material, it's back to the separate drill and tap. I would not recommend these for material any thicker than 3/16, because it's just too close to the tapped portion. Even if you do not want to remove the tool and change speeds on your drill the way I like to, you still have to slow down for the tap in harder materials like steel or you will snap it off immediately, Drilling and Tapping are two VERY different things. I have some of these by other manufacturers that give you quite a bit more drill before you get to the tap, and that's what I prefer. If you are working with softer materials like Aluminum, which would be quite a bit more forgiving, then you might barely make 1/4" thick.
Fred Bloggs
Reviewed in the United States on October 29, 2024
The Junreox 6 Pack Combination Drill and Tap Set is a professional-grade toolset designed for efficient drilling and tapping in one step. This set includes high-speed steel (HSS) titanium drill and tap bits, making it suitable for a range of threading tasks. The bits are available in various sizes, including SAE 6-32 NC, 8-32 NC, 10-32 NC, 10-24 NC, 12-24 NC, and 1/4-20 NC, and feature a quick-change 1/4” hex shank for easy installation and use.Pros:All-in-One Design: The combination of drill and tap in a single tool allows for quicker and more efficient threading, reducing the need for multiple tools and saving time.High-Speed Steel Construction: Made from HSS, these bits offer excellent durability and longevity, making them suitable for various materials, including metal and plastic.Titanium Coating: The titanium coating enhances hardness and reduces friction, leading to smoother drilling and tapping, as well as increased resistance to wear.Quick Change Hex Shank: The 1/4” hex shank design allows for easy and fast swapping between bits, making the toolset user-friendly and efficient, especially in tight spaces.Variety of Sizes: With six different sizes, this set covers a range of common thread sizes, making it versatile for many projects.Cons:Limited to SAE Sizes: The set focuses on SAE thread sizes, which may not be suitable for users who require metric sizes, limiting its applicability for certain projects.Not Ideal for Heavy-Duty Applications: While suitable for general use, these bits may not be robust enough for heavy-duty industrial applications where greater durability is required.Requires Proper Technique: Users may need some practice to master the technique of using drill and tap combined, especially in harder materials.Ideal Use Cases:Home Repairs and DIY Projects: Perfect for hobbyists and DIY enthusiasts needing to create threaded holes for various applications, such as assembling furniture or installing fixtures.Automotive Work: Useful in automotive applications for tapping new threads in metal components or for repairs.General Fabrication: Ideal for general metalworking and fabrication tasks where quick and efficient threading is necessary.OverallThe Junreox 6 Pack Combination Drill and Tap Set is a practical and efficient toolset for anyone needing to drill and tap threads quickly and accurately. Its durable HSS titanium construction, along with the convenience of the quick-change hex shank, makes it a valuable addition to any workshop or toolbox. While the focus on SAE sizes and potential limitations for heavy-duty use may be a consideration, the overall performance, variety of sizes, and user-friendly design make it an excellent choice for both professionals and DIY enthusiasts alike. Whether for home repairs, automotive work, or general fabrication, this set can help streamline your threading tasks.
Fred Bloggs
Reviewed in the United States on October 29, 2024
The Junreox 6 Pack Combination Drill and Tap Set is a professional-grade toolset designed for efficient drilling and tapping in one step. This set includes high-speed steel (HSS) titanium drill and tap bits, making it suitable for a range of threading tasks. The bits are available in various sizes, including SAE 6-32 NC, 8-32 NC, 10-32 NC, 10-24 NC, 12-24 NC, and 1/4-20 NC, and feature a quick-change 1/4” hex shank for easy installation and use.Pros:All-in-One Design: The combination of drill and tap in a single tool allows for quicker and more efficient threading, reducing the need for multiple tools and saving time.High-Speed Steel Construction: Made from HSS, these bits offer excellent durability and longevity, making them suitable for various materials, including metal and plastic.Titanium Coating: The titanium coating enhances hardness and reduces friction, leading to smoother drilling and tapping, as well as increased resistance to wear.Quick Change Hex Shank: The 1/4” hex shank design allows for easy and fast swapping between bits, making the toolset user-friendly and efficient, especially in tight spaces.Variety of Sizes: With six different sizes, this set covers a range of common thread sizes, making it versatile for many projects.Cons:Limited to SAE Sizes: The set focuses on SAE thread sizes, which may not be suitable for users who require metric sizes, limiting its applicability for certain projects.Not Ideal for Heavy-Duty Applications: While suitable for general use, these bits may not be robust enough for heavy-duty industrial applications where greater durability is required.Requires Proper Technique: Users may need some practice to master the technique of using drill and tap combined, especially in harder materials.Ideal Use Cases:Home Repairs and DIY Projects: Perfect for hobbyists and DIY enthusiasts needing to create threaded holes for various applications, such as assembling furniture or installing fixtures.Automotive Work: Useful in automotive applications for tapping new threads in metal components or for repairs.General Fabrication: Ideal for general metalworking and fabrication tasks where quick and efficient threading is necessary.OverallThe Junreox 6 Pack Combination Drill and Tap Set is a practical and efficient toolset for anyone needing to drill and tap threads quickly and accurately. Its durable HSS titanium construction, along with the convenience of the quick-change hex shank, makes it a valuable addition to any workshop or toolbox. While the focus on SAE sizes and potential limitations for heavy-duty use may be a consideration, the overall performance, variety of sizes, and user-friendly design make it an excellent choice for both professionals and DIY enthusiasts alike. Whether for home repairs, automotive work, or general fabrication, this set can help streamline your threading tasks.
Recommended Products
$245.30
$ 99 .00 $99.00