Your cart is empty.
Your cart is empty.The pin extractor is a plunger style pin extractor for pushing pins out from behind the connector blocks for contact sizes 16-20. This Amp connector tool can be used on AMP CPC type connectors.
corona24pk
Reviewed in the United States on September 26, 2024
Tool works as it should,well built & simple design…I use this tool for connections on Henny Penny Commercial Restaurant Equipment and would recommend this simple tool to other Techs out there in the feild.
Perette M. Barella
Reviewed in the United States on February 2, 2024
Quickly paid for itself in saving time and parts for reworking mistakes, and even repurposing materials from cables no longer needed. Working for me on TE Connectivity AMP & Molex .093 series, both pins and sockets. Push barrel on, twisting seems to help, then push plunger. Works easily 95%+ of the time; once in a while one is difficult---but that's probably prior pin damage, not the tool's fault.
Scott H
Reviewed in the United States on January 26, 2024
Ordered 2 of these extractors. Neither of them would remove pins. Both were too big to fit in most of the holes in the plug. If it did fit the plunger did not come down far enough to push pin out. Plunger pushed back in to handle. Also got both stuck in plug and pulled the outer part of extractor off. Both were completely unusable. Bought the AMP brand equivalent and worked just fine on the same plugs. Spend the extra money and buy the AMP brand extractor.
Steph
Reviewed in the United States on May 8, 2023
I use it at work. The products I work on have a wire harness. Sometimes I have to replace a wire or move it to another location. This works great for that.
tim Dryer
Reviewed in the United States on November 30, 2023
Everything was perfect . I would biy from them again. Removes the pins perfect.
Bert Michaud
Reviewed in the United States on March 5, 2022
First of all, it works as it's supposed to. On the other hand, the quality of the item was less than I expected. First, it wouldn't go into the pin hole because there were burrs on the end of the outer tube. Once that (lack of) quality item was taken care of, I was able to insert the tool into the socket...with great difficulty! The extractor worked smoothly and I was able to remove the pin from the body of the socket. However, I was having difficulty extricating the tool from the hole and the handle pulled off! That shouldn't have happened. After replacing the handle, I used pliers to remove the tube, but quickly found that the tube was easily crushed/dented. The tubing is probably steel, but a little more hardening of the metal or a slight increase in the thickness of the metal might give it the necessary strength for this not to happen. Personally, I think hardening of the tube would do the job cheaply. Summary: it does the job, if you coax it along...it is not industrial quality!
Fiore
Reviewed in Italy on February 6, 2022
Allora, ho acquistato l'articolo pensando avesse un'altra funzione. Poiché non idoneo a risolvere il mio problema l'ho restituito.Forse divrebbero migliorare la descrizione
Kelley
Reviewed in the United States on December 21, 2022
Tool does exactly what it is supposed to. Removes pins with ease with very little effort and no damage. This will be a permanent tool in my kit.
Ian Mazursky
Reviewed in the United States on April 15, 2021
Ive been using this for AMP MetriMate connectors.The pins and sockets aren’t a super tight fit so they can be easier to get out then on some other shells.So far this one has been great. Though I did run in to a couple of pins that even the AMP/Tyco branded one couldn’t get out.The trick I found for this one and the AMP/Tyco is you have to bottom the tool out, then rotate and push the plunger.It’s a little odd at first but that’s the best way to make sure all of the tines are compressed before you push.If you push and they're not, you can bend them in to the plastic and they’ll never come out.The only real difference that’s important is the barrel on the Jonard is a tad thinner then the AMP/Tyco.Time will tell if this makes a difference on my connectors.
Richard
Reviewed in Canada on December 18, 2019
Good
J.C
Reviewed in Canada on March 27, 2017
worked as i intended
Anuj Chopra
Reviewed in Canada on July 14, 2016
Better then the offcial amp one
David Sutton
Reviewed in Canada on June 1, 2016
Exactly as described and arrived in good time!
Recommended Products
$12.49
$ 6 .99 $6.99