Your cart is empty.
Your cart is empty.Say hello to the JET 22" Scroll Saw. Combining best-in-class features, with innovation and thoughtful design, to create the machine you've been waiting for. The best part about this saw is the blade change process. Our exclusive upper mechanism clamps and tensions the blade in one step. In addition to the upper mechanism, the toolless lower blade holder is removable and the table features a slot for the blade. The features don't stop there: this saw offers 22 inches of throat capacity, and an arm that tilts 45 degrees left and 45 degrees right. This saw is designed to optimize your scrolling experience. From the variable-speed range, to a top-lift spring-loaded arm, this saw comes fully loaded with all the features you’d expect from JET Tools.
Kenneth F.
Reviewed in the United States on November 4, 2024
Very heavy once adjusted properly cuts very straight and square.The only issue I have is when cutting a 45° angle the blade holder knocks on the bottom of the table. I got with customer support. There does not seem to be any way to adjust that out.My workaround is to have blades facing both directions in the blade holder so I can flip them when needed depending on what direction I’m cutting my 45
Customer
Reviewed in the United States on August 28, 2023
One of the best scroll saw’s I’ve owned. Easy blade change. I’ve been scrolling for 23 years and wish I had this saw years ago.
Mark A Bentley
Reviewed in the United States on March 24, 2023
I started using a Scroll Saw 20 years ago and this is the third Scroll Saw that I have owned and I have to say that I am not overly impressed.My first complaint is the lack of a light, but I knew that when I purchased it. I was looking forward to being able to enjoy all the benefits that were advertised, quiet running, quick blade changes, and being able to raise the upper arm so that I would not have to keep bending blades to make internal cuts. Sadly I feel that they are not quite as advertised.Quiet Running.This is true, if your tension is set perfectly, and I mean perfectly, otherwise the machine as this very discordant CLANKING that it makes until you putz around with the tension settings.Raising the upper arm.You can, but there is no guarantee that it will stay up, I have not put more than 20 hours on it since it arrived (my shop is not heated and it is cold here in the winter) but I have already had to adjust the bolt that keeps the arm raised. The not fun part of this is that the blade, because it is not clamped in place below, has a tendency to slip out of the cradle that holds it while I am trying to thread it through a hole to make the next internal cut.Blade Changing.I already mentioned how the blade likes to fall out of its cradle which they appear to have attempted to remediate by adding a couple of pieces metal wire that do a better job of getting in my way when I am trying to put the blade holder in place than it does keeping it there. Also, good luck trying to quickly pop the blade holder in place without bending down and looking to see what you are doing. Finally, in my opinion, the blade holder that you need to clamp the blade into could have been better thought out. Because the holder is basically a threaded hollow, it bends the end of that blade as you tighten it which lowers the lifespan of the blade. If they had a solid surface that the blade would press up against instead of being bent into the holder, I feel that they would last longer.In conclusion, as someone who makes and sells a number of scrolled items, it is important to me to be able to both work quickly and accurately all while minimizing the cost of my tools or consumables. Maybe I just need to get used to using this machine, but so far it has both slowed me down and increased my costs by decreasing the life of my blades. I will continue to use it for a year, but if I do not start seeing better results I will be looking for my next machine.
Ray
Reviewed in the United States on June 14, 2022
This saw is so easy to use and cuts down on set up time on their way they have their blade set up. Also by the arm being able to stay up is a big win to. But the blade clamp and adjust tension all in one cut down on time by not have to set the blade then set the tension it all in one Motion. Plus I love the arm moves and the base stays flat it is better to have more control over your work piece. The foot switch is great. Plus the bottom blade holder is so easy and comes with three so you can have three different blades set up and ready for quick change. You can order extra bottom blade holders so you are ready for whatever cut may come up. This machine is will worth the money.
Joe Mirus
Reviewed in the United States on December 4, 2022
The hold down was a pice of junk so is the air plower,the on off switch is difficult to operate there is no light with it.They have a easy to change blade system on the bottom part they put guard to make it harder to get to it among other things.
RockledgeWoodDog
Reviewed in the United States on November 28, 2020
I just received my scroll saw today, and set up was as easy as could be. I was up and running in about half an hour. I upgraded from a much smaller Delta scroll saw, and what a dream. The Jet is a much higher level of saw. I set it up on a table and started cutting, and it was a much more comfortable experience. The foot pedal takes a little getting used to, but I really like it. So far I am very much impressed. I read some of the other reviews, and maybe the people that wrote the critical ones had issues that were legitimate. I didn't have any. The saw was packaged very well and everything inside was in perfect condition. I for see that I will be doing a lot of scrolling in the future, partly due to how well the saw works. If you are questioning whether or not to buy one, my advice is to go ahead. If your experience is like mine, it will be worth it.
WAYNE
Reviewed in the United States on October 15, 2020
Great saw. Best I've ever used.
raymond l.
Reviewed in the United States on February 20, 2017
right out of the box i did 2 hours of cutting. this machine is whisper quiet! the only sound u will hear is the blade cutting into whatever product u r working on. the changing blades takes some getting use to, but for top or bottom feeders, i do both, once u get the hang of it, it is pretty easy. i used a couple of spiral blades as well and once u adjust the upper contacts it hold those blades without problems too. this is an awesome machine! there is a lot of work space also. highly recommend this machine!
Recommended Products
$210.00
$ 87 .99 $87.99