Your cart is empty.
Your cart is empty.Product Description
Perfect Solution to Add More Light to Your Dark Place
1 to 3 makes the lights brighter!
JACKYLED E26/E27 Light Bulb Socket
This 3 in 1 light socket adapter is standard E26 base and the sockets fit for any E26 E27 bulb. And you can add 3 bulbs to increase the brightness! (Max power: 60W / bulb, 180W total.)
Note: For safety, please do not use it over the power.
Light Bulb Adapter Socket Converter Details
360° Rotatable & 180° Bending
Each socket has a 360 rotating degree design, and the bending degree is 180.
You can change the angle of the socket at your will.
Durable Metal Base
The E26/E27 light socket is made of durable metal with good electrical conductivity. Use this lamp socket for voltage range: 90-240V. INDOOR use only.
High-quality Copper Core
The copper core has good conductivity, make sure the connection is tight enough for a good contact.
Easy to install, no wiring needed.
PBT Fireproof Material
Made from PBT fireproof material, this 3 in 1 light socket adapter is anti-burning, anti-aging, with heat resistance up to 392℉/200℃.
No Fire Hazard.
-
Turn a single light fixture on ceiling fan to three bulb fixture!
-
Immediately have a brighter pendant light, No re-wiring or anything needed!
-
Allow you to adjust the lights to where you want to focus more light output!
-
Isn't the room bright enough? Screw it in!
-
Is the decorative light too dim?
Use it to get more light without replacing a light fixture!
Stacee
Reviewed in the United States on March 1, 2025
WORKS PERFECT, EASILY CONNECT 3 CAMERAS
fresherbrine
Reviewed in the United States on February 27, 2025
Two and a half years ago I installed an LED garage light fixture into the porcelain lamp holder in the garage ceiling. It just burned out so I temporarily replaced it with a 75-watt incandescent light bulb. But I missed the brightness of the LED light fixture. I wanted a fixture that didn't pose a risk of burning up or burning out after a few months. This Jackyled light socket splitter seems like the perfect alternative. I adjusted the angle of the sockets, I put four 13 watt A19 LED light bulbs in it, and I screwed the fixture into the ceiling. Installation was a synch, and it's so bright it hurts to look directly at it. Total watts = 52W; total lumens equal 6,000 Lm. (The instructions say that you should have a total wattage of no more than 80 watts, so LED's are recommended.) I'm glad I can see the dark corners of our garage again.
VinMan 5000
Reviewed in the United States on February 19, 2025
I have a single bulb ceiling fan in the living room that produces dismal illumination. I was going to install a new fan, but searched for a solution such as this first and I am glad I did. Simply screwed it into existing fan socket, added the bulbs and it made a huge difference. Excellent and cheap solution.
James A.
Reviewed in the United States on January 5, 2025
Really brightens room up. Pictures show my before and after. I have 3 light one and a 4 light one.
San
Reviewed in the United States on January 29, 2025
Really added much needed light to a dark utility room.Bright lighting using less wattage.
Brad
Reviewed in the United States on September 14, 2024
Works Great, I previously tried a similar product from a different vendor, complete piece of junk, twisted apart because of the flimsy plastic when gently trying to install it. This one is made solid, with either metal or thick plastic where strength is needed.
Pastdolgoal
Reviewed in the United States on May 16, 2024
There's not a lot to say about this product, easy to install and it works. Especially at night as a security light, I use it in the back yard with 3 super bright LED bulbs. Let me tell you, it's so bright that it illuminates part of the street.It's adjustable so you can put them in almost any position. The arms to the sockets are tough and have no excessive play. Overall.. nice little adapter.
Mark Twain "Sam"
Reviewed in the United States on December 8, 2023
I wanted to convert an overhead garage outlet from a single light socket to a double or triple. This product did the trick and well. The only constructive suggestion I could make is to have desigmed the product such that the user could tighten the swivel heads of the sockets. If the bulbs have any weight to them, the arms will droop down and perhaps not where you want them to illuminate. If you try to re-position the arm to shine where you want it, it will nonetheless droop down again. This is not a dealbreaker but it would be nice if the arms could stay where you want them.
Recommended Products