Your cart is empty.
Your cart is empty.
Specifications:
Part Number: FCX18-02
Rods Material: Stainless Steel
Rod Ends Material: Plastic
Pivot Balls Material: Brass
Weight: 31g (1.09oz)
Package List:
1 * High Clearance Links Set
Brian
Reviewed in the United States on February 23, 2025
Shannon
Reviewed in the United States on February 19, 2025
This does not fit the fms version of the 1/18 land cruiser so be warned if you are buying this product for that particular vehicle it doesn't fit. Also doesn't fit on Arizona (1/18 yellow jeep).
knoffi
Reviewed in Germany on January 29, 2025
Hallo,es ist ein gutes Upgrade für euren Crawler (habe die Links für einen FMS FCX18 LC80 geholt), es sollte euch bewusst sein, dass die Teile nicht vormontiert sind und ihr hierfür keine Anleitung habt!Teile passen sehr gut und sind sehr gut verarbeitet und gefallen mir etwas besser, als die Messing Pendants, die Injora ebenfalls anbietet.Warum dann nur 3 Sterne? Wie abgebildet sind es 8 Links demzufolge sollten es 16 Verbindungsstücke sein, leider waren nur 15 im Set enthalten...es ist sehr ärgerlich, da es bereits ein zweites Set war, in dem Teile gefehlt haben!
Trusted Answers
Reviewed in the United States on January 24, 2025
These are great, I use them on a ucx2405 and they fit perfectly and extended the wheelbase quite a bit. If you do this mod you will also need longer drive shafts. Overall the quality was 10 out of 10.
FrankWw
Reviewed in Germany on August 6, 2024
Grundsätzlich ok. Der Zusammenbau ist etwas fummelig.Achtung Einbaurichtung der Kugelköpfe beachten. Die minimal größere Kopfseite verhindert das Abspringen des Kopfes und sollte immer auf der Seite montiert sein, zu der der Kopf abspringen könnte.Man muss die Kugeln mit etwas Fett einpressen, da sie sonst zu schwer gehen und eine saubere Federung verhindern.Ich habe sie in meinen FMS FCX18 LC80 eingebaut, für den sie beworben werden.Leider sind oberer und unterer Lenker ca. 1,5mm zu lang gegenüber der originalen Lenker.Damit sitzt das Rad nichtt mehr mittig im Radhaus.Das ist optisch nicht schön und macht Probleme beim vollen Einfedern hinten und beim Einschlagen der Räder vorne.Ich habe sie dann wieder ausgebaut und die Original Teile eingebaut.Der Raumgewinn (Bodenfreiheit) ist aus meiner Sicht zuvernachlässigen, zumal die Kardanwelleja auch gerade hoch geht und bei Verwendung der gebogenen Unterlenkern völlig ungeschütz ist.
John Doe
Reviewed in the United States on June 2, 2024
Not easy to install, take your time, use the original links as reference before you begin. Also use the photos on Amazon for direction of links.I have no binding issues, I also put injora 45mm oil filled shocks.
Robert
Reviewed in the United States on March 12, 2024
First, these DO FIT the FCX18 LC80. I have them on mine and they are great, look great, work great, no problems. With that said, you do need to know what you're doing. There are no instructions. RC crawlers are NOT a "plug & play hobby". I did not need to do anything "outside the box" to get these to work. Just used the parts they gave and everything went together just fine. Not a fan of having to put the links together, you need to screw on the black parts, as it can be hard to keep things tight and lined up but if you take your time you'll be fine. Youtube has videos on how to do it as well and there are plenty of forums to look at if you get stumped. 4 out of 5 stars due to the annoyance of having to build the links. Look great on the truck and work great as well!
Rp
Reviewed in the United States on December 4, 2024
Most challenging Injora puzzle to date! Finding the right combination of bushings and rod-ends for your particular rig specifically. It works well once you solve it.
Flynt Flossy
Reviewed in Canada on December 11, 2024
missing brass balls, cannot install
Muddler
Reviewed in the United States on October 27, 2024
These definitely improve articulation, the problem is installing them. Study the pictures for 10-20 minutes, maybe print them off. I downloaded them to blow up the pictures so I could see more clearly how to install them. I think I figured out the correct way, but I don't want to force the Injora provided ball links into the stock shocks. The stock ball/links are smaller than those provided by Injora, so the Injora balls fit fine into the Injora links, but you will have to REALLY crank on them to get them in the stock shocks, I have not forced them in, If I wreck them, well then I have to buy new shocks and wait a week or two for parts. Sigh. Right now they are jury rigged to work, I would like to get it set up properly.Edit: So, I switched back to the stock link hardware for the shocks only, it seems to work better than the shock link hardware in the Injora kit. It is still not perfect, but now the shock is held tightly and the link on the axle has a tiny amount of play.
Johnny Hidalgo
Reviewed in the United States on October 2, 2024
I wish they were put together at the factory but that's ok. They go together pretty easy. They also fit the fms stock ball screws at the bottom of the stock fms shocks which is nice while I wait my injora shocks to arrive. I didn't use the smaller ones that replace the y connectors because I don't need them.
Recommended Products
