Your cart is empty.
Your cart is empty.Product Description
If your car or motorcycle has no headlight switch, your headlights probably turn on automatically when you turn your key in the ignition right? With the 5-pin 12V 10-second time delay relay module, you will have control over your headlights!
Your package will include (1) 5-pin 12V 30A SPDT cube style relay, measured at 1.65" x 1.25" x 1.25". Please note that this listing features only the time delay relay module and, while it is compatible with wiring harnesses that use cube-style relays, does NOT include a relay wiring harness. When you apply this 5-pin time delay module, your headlights will turn on 10 seconds after you turn your key in the ignition. This not only looks cool, but also preserves the longevity of your auto-headlights, battery, or circuit/fuse. This time delay relay is a direct replacement and is polar sensitive. If it does not respond, flip the triggering wires around. Refer to this demo video: youtu.be/dOmVZ62CmcQ.
Picture 1
Picture 2
Picture 3
The 5-pin 12V 10-second time delay relay module is ideal for use with car/motorcycle retrofit lights that do not have a switch, and is also perfect for high powered lights like LED light bars, LED work lights, and HID systems.
Brian V.
Reviewed in the United States on January 18, 2025
Used for an air-horn add-on for my old pickup. This makes sure the compressor doesn't kick on until after the truck has been started and the engine has smoothed out. Replaced a bad timer delay, and a separate relay module, with this. It made for a much simpler install and has worked great for over a year now.
KAR
Reviewed in the United States on August 26, 2024
Relay works as advertised, but the connector and wire pigtail shown in all of the photos isn’t included. Now I have to find one to finish the job.
BIlly Burton
Reviewed in the United States on August 21, 2024
Relay did not ever transfer power to Pin 87 even after waiting 10, 15, 20 seconds
Cordell
Reviewed in Canada on May 31, 2023
Even though Amazon said it is meant to fit in a cavalier it is clearly not. As I saw it already being bigger than the original. I gave it a go beside that fact. It didn't work as the signal lights weren't functioning. Took it out and replaced it with the appropriate relay and it works. I would not go for a universal part in the future.
jonnyb
Reviewed in the United States on January 1, 2023
Purchased this to stagger the start of my cooling fans. My 900 Turbo has a very common mod which runs both fans in cooling mode. But, with the engine idling and both fans kicked on simultaneously it damn near killed the engine! Adjusted some wiring in my fuse box to allow this to sit next to the stock cooling fan relay. Now when the radiator temp switch closes the main/right fan kicks on, but the Aux/AC/left fan doesn't come on right away. Need both fans here in Vegas summer heat, but definitely didn't need the electrical shock load - this did the trick and its a pretty accurate 10 seconds. Even 1 second would have been plenty, but 10 secs is fine.
Ross
Reviewed in the United States on March 4, 2022
I purchased these for my HID/LED headlight harness, to delay the start time and not interfere with startup. These would not work no matter how much I tried. I assume they are very low quality or wired wrong and my review rings true with others who say these don't work.I replaced with some adjustable hella variants and those have better results.I DO NOT RECOMMEND THESE AT ALL.
Jason T Machen
Reviewed in the United States on November 8, 2022
This was a perfect option for my classic car. Prior to installing, I was having issues with my stereo freezing up because the stereo was trying to boot up while I was trying continued starts of the engine.Once I installed this I can ensure the stereo doesn't attempt to boot while I am starting the car and I've had no issues with the stereo freezing up since.
Chris Latoski
Reviewed in Canada on October 7, 2021
When I bought this item it said it would fit my vehicle and it does not.
Mark elliott
Reviewed in Canada on September 28, 2020
used to control cooling fan on car radiator
Julien derome
Reviewed in Canada on September 25, 2020
Produits genial pour toute installation automobile,
Nate S
Reviewed in the United States on May 7, 2020
I used this to delay the turn on of an aftermarket amplifier hooked to the speaker outputs of a stock 2016 Subaru. The car sends a nasty loud bass note through the stock speaker wiring when first starting the car.This works perfectly to delay turn on and fixed my issue, but for some reason mine allows instant 6 to 7 volt bleed though until switching to 12volt at ten seconds. So if you plan to use this for a voltage sensitive item this could be an issue. As long as you need at least 12 volts, for that 10 seconds, this is good.Just updating, sons been using this a while now, still works perfect. He no longer shakes the house each time he starts his car. I would recommend this to anyone needing that delay timer, but this will not replace say a standard fuel relay, etc.. even though Amazon's search feature says otherwise. This is a completely custom product, perfect for what I needed. Also, the turn on can be either positive or negative depending on what post you use.Sorry there are no pictures, didn't think to take any... besides it's a black plastic box I soldered wires onto, wrapped in shrink wrap. Rather dull looking.
43576
Reviewed in the United Kingdom on January 23, 2020
I have make my own diagram for the delay on my daytime running lamps to save the battery before I start the engine.
Stableblackhawk
Reviewed in the United States on November 28, 2019
Wont solve the flickering lights but itll solve the error messages you'll get.I bought this thinking it would solve the problem for hyper active lights and fast turn blinkers but all it did was solve the error message I kept getting which was helpful. But I realized I needed to actually buy an LED Conversion band for my wiring for LED's to work
Recommended Products
$33.00
$ 15 .99 $15.99