Your cart is empty.
Your cart is empty.Igaging premium precision professional grade tool Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits Decimal in SAE mode or 1/128 inch fractional display. This caliper offers IP54 resistance protection against dust splash water and oil. Features: easy read Super large display (2-3/8"x7/8") IP54 - splash water, oil and dust resistant hardened stainless steel precision lapping finish range: 0-6 inch accuracy: 0.001 inch repeatability: 0.0005 inch resolution: 0.0005"/0.01mm/1/128".
Corrie
Reviewed in Canada on January 2, 2025
These calipers are amazing for the price. These sit nicely between the cheapo knockoff calipers and the high end calipers. At double the price of the cheap caliper and less than half price of the high end this feels like the perfect price point for what you get.I've never tried a high end set but compared to the cheapo ones these are amazing. Incredibly consistent in the measurements and feels very solid. This is a must buy if you use calipers on a regular basis.
nikkolaus
Reviewed in the United States on September 28, 2024
I bought mine in November of 2016, and they're still working as of September of 2024. They see use almost every day, and I've almost never had any issue with them. I hope they will serve me well into the future. This brand has my recognition as being high-end and worth every penny, for such a well-made and well-calibrated device. Before I bought these, I always said "ahh, a tape measure is good enough", but no.. These types of tools change your perception, and your life. This device is quick to power on, has good physical buttons, is very accurate and fast to obtain the measurement, and then very easy to read! If I had to pick one thing to nit-pick about, it would be the battery tray. Sometimes the battery tray gets hung up on the metal contact surfaces attached to the PCB of the display, for the negative battery connection, and I have to fight with it (gently!) to release. The tab for the negative side of the battery is very thin and fragile, and pushes up from the middle of the unit to make contact with the bottom of the battery. It comes in a very nice case, with an instructional manual, the calipers, and an IP-54 seal for splash protection against liquids and dust. Even the hinges for the case have lasted longer than I ever thought they would, being that they're a plastic. The case is friction-fit to hold closed firmly, and requires a decent amount of effort to open, using both hands, on a barely-textured smooth case surface.I am a procurer, restorer, and reseller. Sometimes when I'm making 3D replacement parts, or I'm selling something to someone (like washers or bolts) the measurements need to be exact. Just a fraction of an inch off on the head of a bolt or the thickness of a washer in a set of 4 can throw off an entire project. This tool is essential to my daily life.
Suzanne LP
Reviewed in the United States on April 28, 2022
Update:After having this over two years now I love it and am glad I went with the iGaging brand. I have only needed to replace the battery one time so far and it's been working great. I would not be surprised if I purchase a second as a spare as I am always loosing this, or wishing I had something to toss in my trunk to keep with when inspiration strikes.Original:This caliper has been with me for about two weeks so far and I have not had any issue; it just works. I did quite a bit of digging before settling on this and did appreciate the reviews that pointed me here so hopefully this helps someone else.The caliper came with two batteries but only uses one so I guess I have a spare.Using the measurements from this caliper I designed and then 3D printed a plastic insert to replace a missing piece from the track of an accordion door. I included a nut and bolt in the design and wanted the fit to be as tight as possible so I set the hole to the exact size of the nut. I was pretty surprised when everything fit together on the first attempt as I have neither used a caliper nor a 3d printer before.The hole for the nylon nut I used was so tight that I resorted to using a small pliers to pop it into place. I couldn't have asked for a better fit. The plastic insert itself fit tightly in the track and I used a small hammer to gently tap it into place.I included photos of the project for reference. Edges were crisp and dimensionally accurate right off the printer but I did had to dig out some supports I should probably not have used in the first place so please ignore any bumps and scrapes along the side slot. The caliper really did it's job well.
Singapore Bob
Reviewed in Singapore on July 17, 2021
I only use it once in a while, so want it to remain in good condition and not lose fidelity when stored - the better quality case helps with that too. So far it's done that well - I'm by far no expert but feeling it has some weight to it and the moving parts don't wobble or jerk but move smoothly, that unlike the [identical looking] $5 knockoffs can sense it really is better made and of good quality steel and other parts.Note for others: if like me it is not used for longer periods do close the jaws AND lock (firm but not over-tight) the slider when stored.
Cristofano Varacolaci
Reviewed in Mexico on March 18, 2021
RESUMENSi buscas un vernier confiable, preciso, robusto (construcción de acero templado REAL), a un precio super accesible, no busques más. ¡Lo has encontrado!-------------------------LO BUENO:• Confiable: La medida es siempre la misma sin importar si mueves el cabezal rápido en el cuerpo.• Material: Esta echo de acero templado. ¡Todo! Las mandíbulas, el cuerpo, la escala de profundidad, bueno el display es de plástico, pero es normal.• Acabados: El maquinado es de muy buena calidad, no es perfecto pues tiene algunos bordes afilados donde no debería. No son bordes que te pudieran cortar ni nada como eso, pero si podrían dañar tu superficie de trabajo si es por ejemplo de madera y lo arrastras sobre ella.• Robusto: ¡Nada se mueve sin que tu intervengas! Las mandíbulas no se mueven de un lado a otro como en los vernieres chinos. De igual manera, si fijas la mandíbula a cierta medida con el tornillo de bloqueo, no se moverá.• Legibilidad: El display es grande, y tiene muy buen contraste.• Escalas: Medidas en milimetros, pulgadas decimal y pulgadas fraccional.• Batería: Usa pilas CR2032, que no sólo suelen durar más que las típicas baterías super pequeñas que usan otros vernieres, sino que al menos para mí son mucho más fáciles de adquirir. (además incluye 2)• Precio: Por alrededor de 650 pesos (30usd) no hay ningún otro vernier que pueda competir con la calidad de este. Al menos yo no lo he encontrado (y estuve buscando por más de 8 meses).• Extras: Incluye un par de baterías además de un estuche de plástico duro (se ve bastante más resistente que donde vienen los otros chinos) con espuma recortada a medida para conservar el dispositivo. Se agradece que no sea el estuche genérico de todos los demás.LO MALO:• Es muy difícil ponerle peros a este vernier, pero si no considerara que cuesta 1/4 de un mitutoyo económico podría pedir que la rueda del pulgar tuviera menos juego, y tal vez que las mandíbulas superiores (para mediciones internas) fueran un poco menos afiladas.
K. Reimann
Reviewed in Germany on March 4, 2018
Anderswo schwer zu bekommen. Dieser Messchieber aus den USA (in China produziert) ist wegen des Re-Imports leider nicht ganz billig, hat aber eine ausgezeichnete Qualität und Genauigkeit, wie auch die vielen Rezensionen von Käufern in Amerika belegen (Amazon.com). Kein Vergleich zu den unzähligen billigen China-Teilen, die unter diversen unbekannten Marken verkauft werden. Besonders gut: Die Anzeige in Zoll als Bruch. Wer mit amerikanischen Maßen hantieren muss, weiß das zu schätzen.Einziger Kritikpunkt: Das Batteriefach schließt bei dem vorliegenden Gerät nicht so stramm wie es sollte. Das ist vermultich nicht bei jedem Gerät so, aber auf einen Tausch habe ich wegen der hohen Versandkosten verzichtet.
Ashley
Reviewed in Canada on December 12, 2016
It has its own box, its also very accurate. I test this by running it up and down the scale quiet fast 2-3 times in a row, if it lands at zero after that then this is generally a good test (it means it wont lose count as your moving it).Ive read the reviews before buying it, and they said it was a good unit, with the above test i can confirm it appears good. Very easy to read display.
David L.
Reviewed in the United States on October 18, 2015
I can find no flaws with these calipers. While I don't have any expensive equipment to compare these against, they always return accurately, slide smoothly, and are generally not a pain in the butt to use. They can be carried in a pocket, so long as you don't find the bulky top section sticking out to be a bother, and there is a handy-dandy conversion table on the back of the reader, which you probably won't need since you can change from millimeters, to decimal inches, to fractional inches with the push of a button. So its probably more useful for rounding as the readout for the fractional inch measures up to 64ths which is probably an unwieldy and unfamiliar for most people to work with. If there were one additional button that allowed you to change from what degree of rounding you wanted these would be golden!Then using them would require absolutely no brain-work at all and they would be entirely worthy of their EZ Cal designation, as opposed to them being simply an accurate, affordable and unfussy tool. But I suppose it's EZ Cal and not Brain-Dead Cal. That would probably be more complicated and thus more costly to make, not to mention that the additional button would make it bulkier and maybe defeat the purpose of this design.Coming back from discursiveness, the actual scale is painted on a metal inlay away a certain distance away from the edge which helps protect it from rubbing off, but of course it's still not laser engraved into the bar. But then I ask for too much.I think I've rambled well enough, needing to mention only that it comes in a nice, protective case with instructions and that it doesn't come with batteries, which are of the small, round 3v variety.Having paid about 30 USD for them, and having them not be effectively useless like another pair I bought at Home Depot, I am entirely pleased with them and will be purchasing more iGagaging products in the future for their excellent quality over price.
Recommended Products
$22.98
$ 10 .99 $10.99