Your cart is empty.
Your cart is empty.Product Description
Why you need a LED pool light?
What advantages you would get from PN03DC?
- High Efficiency. Due to the high energy conversion ratio. In white mode, This LED light could emit the same light as the 300w incandescent bulb. 10% energy bill, 100% illumination.
- Low Cost. Only 10% energy cost compare to Incandescent bulb.
- No need to purchase extra LED bulb, this is a All-in-one LED light.
- Perfect After-sales Service. HQUA will repair or replace any product that failed during two years' normal operation.
- High Quality SMD LEDs. These LEDs not only have a good performance on pure cool white, but also with excellent light distribution.
- RGBW Color Changing. Provide up to 12 different modes and rainbow single color choose. No matter if you want a single color(cool white also) pool or a fancy/disco/club pool. This product would give you a satisfied option.
How to control your PN03DC LED pool light?
- Wheel Icon: Modes button. 12 modes are available. Single color modes: Red/Green/Blue/Yellow/Purple/Cyan/White/Black. Color changing modes: 3/7 color jumpping/flashing.
- W: White light switch(short click)/White Light Brightness Control(long-term pushing).
- Switch Icon: Close/Open the product.
- Rainbow color ring: Touch and set a single color that is your favorite.
- +/-: In single color modes, it adjust the brightness of the light. In color changing modes, it change the speed of jumping/flashing.
With the new pair up, one remote could control 5 lights at most.
3 Key Points to Keep Your Safety.
5C×20 AWG,100’ Weatherproof Electric Cord,UL listed
- 5*20 AWG SJOW 300V Cord. It could handle 4 Amperes, but we only run 3 amp on it. Ambient Temperature range from 105 F to 220 F.
PN03DCD LED Driver
- PN03DCD LED Driver would change 12V AC into 12V DC.
- 12V DC outlet is 100% safe for the human body. Which is stricter than the standard of 25V DC that been using in the most of landscape lighting, also as known as SELV (safety extra-low voltage).
- Even if there is a electric leakage happened, you wouldn't get any hurt for that.
Unique Waterproof Gel
- The special material was used to cover the LEDs and the bottom of the light. Durable design will ensure both safety and light transmittance.
- Protects the LEDs away from the water. And the human boday away from the electricity. But light will still go through the gel with only 1-3% lost.
What kind of niche this light would fit for?
Large Stainless Steel Niche for Concrete Pool
Large Plastic Niche for Concrete Pool
Large Plastic Niche for Vinyl/Fiberglass Pool
A few notices for the installation:
- The correct connection is : 110V-120V AC to GFCI to Your Pool Light Transformer(Which is not provied in this product), it would provide 12V-15V AC to PN03DCD, and PN03DCD would change 12-15V AC into 12-15V DC and power the M4-3A controller, after that, RGBW wires would transmit through 100' electric cord to the LED light.
- The LED light needs a wet niche to be installed in. We don't provide a niche/housing for the concrete/vinyl/fiberglass spas. If you need purchase a niche/housing for this product. Please consider the brands and part numbers listed above.
- Follow all the requirements about the dimensions above to get a better performance and avoid potential damage.
- Leave enough electric cords behind the light in the niche is very important to change the replacements and maintain this product.
Andrew
Reviewed in the United States on February 9, 2025
I have had this light for about 4 months now. It has worked great. I love the colors especially the powder blue cover. It is reliable,the color is great. I have had not trouble with it at all, and for the reasonable price compared to some of the other brand names, I am very glad I went with this light.
GFL
Reviewed in the United States on January 4, 2025
My husband installed this quickly without issue. Love the changing colors, really fun and elevates the pool look. Bright when on and clear when not in use.
John Rowland
Reviewed in the United States on September 10, 2024
It did not attach to my opening for the pool light when replacing the old one. The notch at the bottom was not far enough out to latch onto the notch. So I had to jury-rig a solution.The light itself works great and is bright. But be cautious that it will fit
Robert Cope
Reviewed in the United States on July 4, 2024
Could use a different remote system, something a little stronger, not real happy with the remote system changing the light colors
Steve R
Reviewed in the United States on May 21, 2024
This was by far the easiest pool light change out I have ever made. The compact design allows for extra wire to be coiled behind it in the pool fixture. The colors are vivid and bright. As my Amazon account will show, this is the 3rd LED pool light I have bought in 2 years. Hoping this one lasts longer than the past 2 choices.
Brandon Erdmann
Reviewed in the United States on December 1, 2024
Seal is trash. Installed in pool and the bulb started dying after about two months. Took the light out to find it half full of water. After a ton of fighting I got Amazon to give me a refund. It wasn't easy though. Look for a different light if yoy want something that will last.
Masha
Reviewed in the United States on October 1, 2024
Looks just like the classic Pentair light, hard to tell the difference even up close, although that plastic lens is a bit concerning for the long-term.5-lead wire for RGBW and power. Compatible with most off-the-shelf RGBW led strip drivers and such. Threw away the factory remote and controller first thing and got myself a cheap Zigbee LED strip driver to integrate the pool light with my Home Assistant setup. Worked like a charm, and the Zigbee box even fits nicely into the original pool light junction box. All this happening above the water level with easy access and great signal level for wireless control.The 60W power rating is a lie, the 12V AC LED driver brick limits current to 3.25A (do your own math) and the actual draw on the brightest setting is even less. But it's still plenty bright for our small pool. The ~6000K white being brightest of them all by far and all other color and CCT choices appearing much dimmer.Still contemplating if that chunky 12VAC CC driver box and my old rusty transformer even need to be there, when it can all be powered by a laptop power brick (with some care), but I guess it's good for safety.Now let's see what happens when this thing inevitably starts leaking in a year or two. The legacy Pentair lights definitely have a reputation for being pretty robust, I don't think this light has a chance to measure up, but only time will tell. At least the 5-strand cable design gives hope it could be gutted and refurbished for cheap some day with parts off of Ali.
Eric G.
Reviewed in the United States on April 16, 2024
The install was simple. Bought a separate 120 VAC to 12VDC dual output power supply and a plastic box for it and the 12 V controller. They are bright and have so many color options. The remote control has very good range. I had Hayward color logic and they died after about ten years. I couldn’t justify the $1000 replacement just for the light. So I went with this 12v. Very satisfied. And the support is over the top excellence. Very responsive to questions about the remote operation. Pointed me to a you tube video. My wife and I DIYd a 10 inch in the pool and 6 inch in the spa. Highly recommend.
Recommended Products