Shopping Cart

Your cart is empty.

Your cart is empty.

Hot Racing AON24M02 Aluminum Steering Servo Mount Arrma Kraton

4.8 (10) Write Review
Free shipping on orders over $29.99

$22.50

$ 11 .99 $11.99

In Stock

About this item

  • Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
  • All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
  • Hot Racing part number AON24M02; UPC 083745896633
  • This item works with: Arrma 1:8 Kraton, 1:8 Senton, 1:8 Talion, 1:8 Typhon, Outcast


Product Description

Hot Racing aluminum steering servo mount for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX. See vehicle model compatibility in comments below.

FEATURES:

- Provides a solid platform to mount the steering servo - CNC machined aluminum - Anodized black with machined chamfered edges

YOU WILL RECEIVE:

- One (1) steering servo mount - Four (4) posts - Hardware

REQUIREMENTS:

- Installation - Recommended to use medium thread lock on screws threading into metal - Does not reuse the Arrma servo tab spacers from Arrma AR320193

COMMENTS:

- Replaces Arrma steering servo mount from AR320193 and AR320430. Does not reuse the Arrma servo tab spacers. - Replaces ARA320574, - Known to fit the following Arrma vehicle part numbers. The vehicle part number can be found on Arrma's website, the literature that came with the vehicle, or on the vehicle box around the barcode. If a vehicle is marked below with the word "optional, " then the part may fit, but may require some modification. - Kraton: AR106005, AR106015, AR106018, AR106029/31 (red/green), ARA106040T1/2 (red/blue) - Notorious: AR106034/6 (black/blue), ARA106044T1/2 (black/blue) - Outcast: AR106021, AR106027, AR106032/3 (silver/orange), ARA106042T1/2 (silv/org) - Senton: AR106007, AR102654, AR102673 - Talion: AR106003, AR106014, AR106030 (2018 V3 model), ARA106048 (V4) - Typhon: AR106001, AR106013, AR106028, ARA106046

AON24M02

AON24M02

AON24M02

AON24M02

AON24M02

AON24M02


Matthew M.
Reviewed in the United States on October 10, 2024
Does what it's supposed to the perfect price point.
Rich S
Reviewed in the United States on January 7, 2024
Perfect fit and very stable and strong. The original is aluminum and plastic mix and even with a stock servo would give and bend so I’d lose some steering travel, where this replacement set not only holds the steering servo solidly but very stable. Love this upgrade
Francisco Delpilar
Reviewed in the United States on March 15, 2023
Much better than the stock plastic servo tray. It does add a little extra height to the servo (depending on the height between where your servo will sit and the top of the servo - they are not all the same). To net result is that the arm will connect to the servo saver a little lower than the servo side. There are a couple ways to fix this. They way I fixed it was to simply add a slightly longer screw (may have been a 3x16 or 3x20) and added a locking nut between the servo saver and the connecting arm (photo not shown). The other way to fix it is to use a servo that has a lower output spline position. Many good servo manufacturers will provide specs and will show the height. I suggest the longer screw. No problems with this method so far.
Chiper
Reviewed in Australia on October 29, 2023
Fitted to a Arrma 6s v5 Kraton a must upgrade for better steering.
Reviewer #007
Reviewed in the United States on June 5, 2021
Works as it should easy to install and easier to remove and install servo than factory due to being able to remove just the top cover on this version instead of having to take the bolts out from underneath to remove it. which you may have to do anyway if you can't fish the wires out from under the esc housing on the kraton 6S V4 model anyway.
mike
Reviewed in Canada on June 29, 2020
Really strengthens servo mount
Angel
Reviewed in the United States on March 1, 2019
I like the part, it looks well built and looks cool on my rc car but it didn't come with any instructions on how to put it toghether. This might be a pretty straight forward part to install for some, but not for everybody.
Yammo
Reviewed in the United States on November 20, 2019
Hearing how bad the stock servo and mount were I ordered this off amazon and a JX EcoBoost 36kg servo off AliExpress before I even ordered my outcast. Looking at the stock setup there definitely was some movement in the mount and steering was underpowered so happy with the steering upgrades I bought. Highly recommend this mount and the JX EcoBoost servo is working great so far as well. Lots of power and plenty of speed.
Jennifer Solivan
Reviewed in the United States on October 27, 2019
Solid piece. A must have for 1/8 especially if you’re pushing over stock power to the wheels!! My 90+ mph senton 6s destroyed oem setup. Won’t happen again!!! This setup goes very nicely w upgraded servo ;-). One of the most crucial systems is steering, zero play no wobble or give. Do yourself a favor and grab one of these w a metal gear servo and have confidence your steering won’t fail.Now if hot racing could just offer different colors options for arrma or titanium upgrades or even more carbon fiber upgrades then we’d be building some serious machines!!
Customer
Reviewed in the United States on April 15, 2019
All the pieces and hardware were included. Arrived on time and in good condition. Fits just like the factory mount, however it stopped the flexing and my outcast turns much better.