Your cart is empty.
Your cart is empty.
Specification
Power Rating :1.8KW
voltage : 110V
Inflating Speed : 2800R/Min
Air Flow Rate : 13.2GPM
Working Pressure : 0-30MPA /0-4500PSI
Noise : MAX 85DB
Cooling System: Water Cooling
Compression Stage: Two Stage
Lubrication Mode: Splash Type
Material of Cover: Cast Aluminum
Material of Motor: 100% Pure Copper
Test Inflating Result: It takes 5 mins to fill full 0.45L tank to 4500PSI
Test Inflating Result:It takes 12 mins to fill full 1L tank to 300 BAR
Package Content
30Mpa Air compressor pump x 1
Water pump x 1
Water pipe x 2
Hose female x 1
Air cock x 1
Pressure relief screw x 2
Wearing parts x 1
English Manual x 1
Warning:
1 If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause.
2 The product should be placed at a place that it couldn’ t be touched by children.
3. Please do not use it in moist and flammable place.
4. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
6. Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
7. Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature.
8. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled.
9. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.
Fishman
Reviewed in the United States on May 27, 2025
I've had this compressor for about 4 years. It has worked fantastically for me. I use it at least once a month to fill a 6.8 l DOT/scuba tank. You can find the same compressor under a number of different brand names and different colors.
He knows
Reviewed in the United States on March 29, 2025
I have been using mine for about 4 years at lease twice a month to refill my 3 -100 cf carbon fiber tanks .. now at first it would over heat fast so I ended up putting two small radiator and fan and a close antifreeze system . Right off the bat I blew a seal but it had replacement and I rebuilt it but since I made my system how it will not get hotter then 130 F in running for 2.5 hours I don’t worry now.. on a 100cf tank from 3k to 4500 psi takes around 30 mins .. it will make lots of water so please buy good water separator. You see on mine I got a double tank and after each tank fill I’ll drain These tanks and there be a couple teaspoon of water.. if your like me into air rifle pcp keep this water out of your gun it’s very important .. the crap it comes with you can use inline with hose but must get better..
Luis Sandoval
Reviewed in the United States on September 14, 2024
Buena calidad exelente precio bien embalado llego a tiempo
Recommended Products
