Your cart is empty.
Your cart is empty.Product Description
The easy to install Helmet Clip helmet quick release buckle kit.
Easy Install Helmet Quick Releae Buckle Kit
Our patent-pending design is a refreshing alternative to helmet quick-release buckles of the past. The Helmet Clip design makes for easy installation and requires no tools. The results of our independent tensile testing reports, that the Helmet Clip exceeded the requirements for helmet chinstrap retention by 92% and scored 70% higher than the rest of the helmet quick releases tested.
Industrial Testing Results - Twice as Strong! Stays on Longer!
Helmet Clip
After 597 Pounds of force, the manufacturer's D-rings began to warp and the yellow area indicates a period where the Helmet Clip was still holding after the D-rings started to bend.
Notice how the main buckle on the Helmet Clip remained undamaged.
Inferior Metal
The product that claimed to be the strongest, had the worst test results. All metals are not equal. Diecast Metal or Pot Metals are typically used for toys and costume jewery, not safety equipment. 2 out of the 3 test results were below industry standards for motorcycle helmet retention systems.
Failed Sliders
100% of test samples using Slider Buckles abruptly broke because of the Slider Buckle.
In this example and the last, you can see an abrupt decline in the product's performance, once the max load has been reached. Products that use Slider Buckles have proven unreliable for helmet retention systems.
What to Avoid when it comes to Comfort and Safety.
An Uncomfortable Ride
Nobody wants to be uncomfortable while on a motorcycle ride. Especially a long ride. Try to avoid D-ring conversion kits that sit on top of your helmet's D-rings. Having the D-Rings dig into your jaw for a couple minutes might be ok. But, this would probably uncomfortable for an extended ride.
Sliders Fail in Testing
100% of the products tested that used Slider Buckles broke becuse of the slider. Once the Slider breaks, the entire strap comes off and so can your helmet. What might seem to be a solid product is only as strong as it's weakest link.
Plastic Fastners Break Easy
Prior to submitting samples for industry testing, the products needed to pass our preliminary drop test of 15 pounds from an 8ft height, Not a single plastic product passed the preliminary test and were not submitted for industry testing. Some plastic products we could pull apart just by tugging on them. We would not recommend using a plastic quick connect on your motorcycle helmet.
Risk Everything on a Screw?
In an unexpected collision, the force of impact can exceed 500 pounds of force on a motorcycle helmet There are some products using a tiny screw to secure it to the helmet. Is that that what you want to rely on in a critical moment?
Wrong Way!
Right Way!
Smaller than I thought!
Updated Design Requires No Tools!
Works well with Gloves
Gloves are not an issue when it comes to operating the Helmet Clip buckle. We paid close attention to rider needs when designing this helmet quick release.
No need to Cut the Chin Strap
The Helmet Clip is designed to allow you to feed your helmet chinstrap through the slots without having to cut the snap off the end of your chinstrap. Should you decide to remove or transfer your Helmet Clip to another helmet, you can do so without altering your helmet!
Easy Video Instructions
Scan the QR Code with your cell phone or visit the website on the back of the packaging for detailed video instructions on how to properly install the Helmet Clip on your helmet.
Strond Stainless Steel Design like used in High End Helmet Companies.
Quality Materials
Only the highest quality materials are used in construction of the Helmet Clip stainless steel buckle.
Ratcheted Stainless Steel
The stainless steel is ratcheted for a solid metal to metal connection.
The Perfect Mariage
The two parts click together like a perfect marriage. Only until the red tab is pulled will they part.
Quality Control
Each Helmet Clip is inspected for the best quality product we can supply to our costomers.
Pinda1950
Reviewed in the United States on March 1, 2025
This works great on my helmet and it makes it easier to take my helmet on and off with gloves.
Jennifer B
Reviewed in the United States on February 6, 2025
Doesn't always fit the best but I added anyway to our helmets. Make easier to get on and off.
Shiv
Reviewed in India on February 23, 2025
Fits my helmet perfectly. Easy and convenient to use. Installation instructions were easy to follow.
Michelle D.
Reviewed in Australia on February 23, 2025
excellent product
Willie R.
Reviewed in Canada on February 14, 2025
GOOD INSTALL VIDEO TO FOLLOW MADE INSTALL VERY EASY.
Michael W.
Reviewed in the United States on February 10, 2025
Works great! Now I can put my helmet on when I accidentally put my gloves on first. Lol.
Bacardi1
Reviewed in the United States on January 5, 2025
This quick-release buckle kit is a game-changer! The stainless steel construction feels durable, and installation was super easy—no need to remove the strap. The ratcheted design makes fastening and releasing my helmet effortless. It holds securely and adds convenience. Highly recommended for anyone looking to upgrade their helmet strap!
Lawrence E. Venezia
Reviewed in the United States on January 26, 2025
easy to install, just remove snap on helmet strap. Very easy to adjust, close and release. I installed on all three of my helmets.
MetalMatty
Reviewed in the United States on August 28, 2024
I hate D Ring Straps. I know they work well, but they are finicky and with gloves they're impossible.This fixes that issue.This is super sturdy and I trust it not to break in a wreck if I get unlucky. It's easy to install. It looks like it comes with whatever helmet you're putting it on.It does make the strap a little longer, but so far not to causing an issue. Feels a little worse than the normal set-up just because it's metal, but nothing extremely uncomfortable.
jason douglas fuller
Reviewed in the United Kingdom on May 21, 2024
press stud fitted in clip no problems without having to remove,nice strong construction ,impressed and that takes a lot ,shoei nxr.
Nevada Montagu
Reviewed in the United States on October 13, 2024
I've used this product almost daily for about a year. I love it. I use my bike as a daily driver and not fiddling with D rings is nice.Installation was very easy on my Scorpion EXO AT960 modular ADV-style helmet. I did NOT have to remove any snaps or rivets from my helmet strap, like the instructions suggested. It took some work, but I got the strap through the buckle.It was a good thing I didn't remove the snap from the helmet strap. The snap on the Quick Release Buckle broke a few days ago. I'm not exactly sure when it happened. Last weekend I took a 4 day ADV/Dual Sport ride. I took the helmet off a lot as we stopped frequently. Maybe that was too much for that little metal snap?That being said, I'm ordering a replacement! The price is very fair and if I only get another year of use out of the next one, I'll still be happy!I'd give this item a 5 star review if it didn't fail. To be fair, most riders won't put this on their dirt/off road helmets which get yanked on and off multiple times per ride.
S. D. Herren
Reviewed in the United States on September 21, 2023
This device does work, it fit my HJC I90 helmet straps. I did not have to remove a snap.It was extremely difficult to get the straps short enough to feel like this is doing anything to hold the helmet on. Something about the physics of this device causes the strap to tighten across a slightly different spot under my chin. Without this device the strap tightens a little further forward, closer to my chin. With the device, it tightens closer to my throat. I don't like the choking feeling of having it on my throat. I shortened the straps as far as humanly possible and it's not as tight as I usually rode with the D-rings, but then again, I couldn't stand it being as tight because I would feel choked.The device includes a little rubber piece (which I'm holding in the picture) to cover the metal male buckle insert. EVERY time I try to insert the male end into the buckle that rubber piece slides off. I've given up on keeping it in place, it doesn't really do anything anyway. I cannot yet operate this buckle one-handed. Maybe in time with more practice I'll be able to.I didn't like my HJC I90 chin strap because the Dring was smaller than on my previous helmet and harder for my thick fingers to operate. This device is easier to use than fumbling with the Drings, but not by a huge margin. I've been using Drings for 35+ years so even with small ones I can thread the other end through every time. With this device, I'm blinded trying to stab the male end into the buckle and even without gloves on it's hit or miss. I guess I'll get better at that with practice. I CAN take it off with one hand, so that's good.Overall I'm not upset that I bought it. I'm going to give it some time and see if I get used to the throat feel, and get better at connecting the pieces. I'm very glad that I can go bck to the helmet's Drings if I end up not liking this.
RICC
Reviewed in Mexico on June 12, 2023
Funcionan al 100 y lo e ocupado en dos cascos (Bitwell y Bell ) y sin problema alguno
Recommended Products