Your cart is empty.
Your cart is empty.Try Their volcanic rock heat shield mat. Don't be tricked by the "fool's gold", Lava Mat outperforms that gold foil vinyl sticker stuff by reflecting 60 percent more radiant heat. Made from crushed volcanic rock, Their Lava Mat has similar benefits as Their HP Heatshield Mat with that trick carbon fiber look. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood. The Lava Mat can also be laid on a fire wall to shield radiant heat and give your vehicle that trick carbon fiber look. The Lava Mat withstands 1200F direct continuous and 1800F intermittent. This heat shield barrier cloth, can be used with less than 1" of airspace, 3/8" minimum is recommended. Bulk rolls of basalt heat shield cloth are available.
Kyle
Reviewed in the United States on July 22, 2023
The adhesive can’t be relied on, as it shouldn’t be. If relying on add something mechanical or permanent adhesive.
Matt N.
Reviewed in the United States on July 14, 2018
Attempted to wrap my AEM intake box with the lava shield in conjunction with a high temp spray adhesive. I wiped my metal intake with alcohol, cleaned with water and made sure it was dry before install. Spray the adhesive and let it tack for ~30sec (as stated on the adhesive directions). Laid down the heatshield lava shield and it would not stick. Edges began to fray, and I looked up Heatshield Products youtube page stating to spray clear coat paint on the edges to combat the fraying. I did so, but it did not help much. Fraying got worse. My AEM intake looks like a mess at this point and after measuring the running temperatures of my intake before and after installing the heatshield, there was no difference. I'm not sure what else to do to try and make this product work, but I'm disappointed and upset that my new AEM CAI is ruined.
SPH
Reviewed in the United States on May 30, 2017
I used this as a heat shield under my gas tank on my motorcycle. It works very well - no more hot gasoline. It also has a look that is similar to carbon fiber, which is nice if you like that.Tips:- If you are using multiple pieces to cover an area, don't assume you can overlap it. The adhesive is very strong, but it won't stick to the actual material.- The cut edges will fray - depending on the application, you might want to put some nail polish or adhesive on the edge to keep it from fraying. I wouldn't advise this for truly high-temp uses as it could create a hot spot (or just burn away). That being said, I'm not an engineer so take this tip with a grain of salt :)
Faith-Hope-Love
Reviewed in the United States on October 5, 2016
This was a great buy. It was for my husbands motorcycle. The lower part of the gas tank was getting really hot from motor and burning his legs. The heatshield product has really helped. He just cut it to size and added it to the back side of the gas tank. Great product and works as advertised. 👌😁
Fabien Wrédé
Reviewed in the United States on September 23, 2015
Very important Use gloves !Look fantastic, slightly difficult to apply but effective product.
JSand
Reviewed in the United States on August 4, 2013
I bought this to cover my custom Air Intake box I built. I had some left over and did my KN intake tube as well. Before the tube would get too hot to touch.The combo of the Box and the wrap made the running temperature inside the box stay at ambient air temp which was 80 degrees and the engine compartment was at 160 and above.. the tube that ran through the engine compartment was cool to the touch as well, great improvement and it installed very easy! looks even better with the carbon fiber.
Ben
Reviewed in the United States on August 10, 2013
First, the appearance of this material is quite good, and it's heat shielding is reasonable. The issues I have are that the adhesive used is not strong enough, which allows edges to come up. When the edges come up, they begin to fray, and the only way to resolve this is to cut the ends off. I do wish the weave of the material was tighter. In some areas I can see the aluminum chassis through the shielding. I've witnessed all of these problems on other builder's cars. For the price, I would expect better performance. However, since most of my engine compartment is already covered with it, switching out to something else would be expensive and time consuming.
Judy and Mike
Reviewed in the United States on December 16, 2011
This does not reduce the heat at all. I even tried using two sheets, but did not help. The adhesive works great, does not run out or melt.
Recommended Products
$114.99
$ 49 .99 $49.99