Your cart is empty.
Your cart is empty.Product Description
50m/164ft
Transmit audio/video signal up to 50 meters by network cable Cat6/7, and 40m by Cat5e.
KVM/USB
Support remote control signal source using mouse and keyboard.
Loop Out on TX
Dual monitor. It has one HDMI OUT port on the TX that can be used to connect a local monitor. And also has one HDMI OUT on the RX, which is used to connect to a remote monitor.
HD 1080P Video
Support resolution max 1920x1080P@60Hz and 3D signal, compatible with with 1080i, 720p and other resolutions.
POC Function
Power over cable. HDMI extender works perfectly by one power adapter.
Metal Shell
Rugged metal housing, vent holes for easier heat dissipation.
Tori Potter
Reviewed in the United States on September 13, 2024
Plug and play. Works great at 1080p 60hz
Atlantic Coast Guy
Reviewed in Canada on May 19, 2024
This extender worked right out of the box. I added an additional wall-mounted monitor in the next room for a CCTV installation. Ran a piece of CAT 5e, plugged everything in, and it instantly worked. The monitors mirror each other, and each mouse can control the NVR. A wired USB mouse did not immediately respond, so I used a wireless one instead. Did not spend any time troubleshooting, so that may not be a fault of the extender. The transmitter and receiver are really small, so we just stuck them to the wall, and monitor, using double-sided tape.
Customer
Reviewed in Canada on February 6, 2024
Using for a remote KVM for a digital audio workstation (DAW). Plug and play, everything worked first try. Only complaint is that the casings have no mounting points so you'll need to macgyver something.
Tammy Jackson
Reviewed in the United States on November 26, 2024
This USB hdmi extender works great so far. Audio is great. Video quality is excellent. I was very impressed with that. Connectivity was a breeze, I had no issues at all. Very good price point. My husband and I are happy with this purchase. I would recommend this product to others.
Larry Runge Jr.
Reviewed in the United States on October 11, 2024
It works great with a 50ft Cat6 cable with a 24-inch touch screen monitor.
Matthew Valento
Reviewed in the United States on April 22, 2024
Worked fine for few months on my cctv DVR. Next time I had to go retreive some footage the usb(mouse) wasnt working. Leaves me in a predicament as I committed to those camera wires going to the basement.
Yousif almansoori
Reviewed in the United Arab Emirates on May 3, 2023
تم توصيله لمسافة 30 متر وهو يعمل بشك جيد
C Lim
Reviewed in Canada on November 7, 2023
I am able to extend the mouse (USB port) and display (HDMI port) of my NVR unit (in the closet) over a single ethernet cable, all the way to the kitchen cabinet where the monitor is. No issue with using the mouse on the other end. Good product only hope it's a bit cheaper though. Hope this will last and will come back to comment if there is issue down the down.
Ram
Reviewed in the United States on June 7, 2022
Works as described, I see green dots all over the screen some times and gets recovered with ethernet connection reset.Not meant for critical applications such as gaming or watching movies. Good enough for my use case (for computer monitor)The USB ports works only for mouse/keyboard, not working for camera or usb headphones.
Jeffrey Harris
Reviewed in the United States on March 4, 2022
This is a awesome KVM switch especially for the price. It's Build quality is pretty good. It doesn't have small amounts on it like some of the other switches that are a tiny bit more expensive than it. And also has a shorter distance than the others but it is also the cheapest. It worked immediately with no problems and it has good picture quality and so far my customer has no complaints about it. Totally worth it if you're doing short runs.
I want my $2 back
Reviewed in the United States on December 23, 2022
So far this device is working great.. It's been about 6 months. I've tried using different HDMI cables of different quality, Cat6 cabling, Cat6 shielded, Cat6 Riser, Plenum... I have tried everything but artifacts don't go away. It has to be a power issue. I am using this for CCTV monitor extensions. Out of DVR to device input is 3' high quality HDMI cable. Out of the passthrough HDMI I have a 10' High quality HDMI cable for the head end. Cat6 50' connected to the remote side. High quality 3' HDMI cable to monitor. Artifacts.. It worked perfectly for 3-4 months.. then it started showing degradation.. Nothing has changed, nobody messes with the wiring. I removed it and staged it on a lesser scale, meaning, just used a 25' cable and laid everything on a table with different monitors to troubleshoot, and still has artifacts. I ordered 3 or 4 of these I think.. when I change out the device, artifacts go away. So, its either the integrity of the device or the power supply is crap.. I have ordered so many of these types of devices from other suppliers for 3 to 4 times as much $$$ and the same thing ALWAYS fails... the power supply. It appears it's the same thing with this device. Will try getting a replacement. It's hard to beat the price on this for what it does. An HDMI passthrough along with USBx2 and HDMI for $70??? That's dirt cheap. But it would be nice if it lasted longer than 6 months.
Jerome Keating
Reviewed in Canada on August 13, 2021
Very happy with it, simply plug it in and it works great. Perfect image and no delay/latency at all, you can actually use it to play video games remotely. Works right from the moment you turn on the PC so you can even use it to get into your bios settings. It sends audio through the HDMI cable (as long as your pc and monitor support it). Works with logitech wireless keyboard/mouse but depending on your PC if you want to get into bios you might need to use a wired keyboard so it responds quick enough to catch the bios prompt. It wont transfer data over USB and it wont work with USB headset, it will only send usb keyboard/mouse inputs. The ethernet wire must be direct, it doesnt work through a switch because it doesnt use networking protocols, needs a dedicated wire from one box to the other.
3D
Reviewed in the United States on March 30, 2021
I was a bit concerned at first because there were some mentions of artifacting in other reviews. So here is my assessment having "rolled the dice".First, make sure you are using a proper HDMI monitor. (At first I tried using an older DVI-only monitor and got significant disruption to the signal. I was using an HDMI-to-DVI adapter, but that is a very hacky thing to do since they are different protocols.)When I tried it on a TV and/or monitor with proper HDMI input, it worked "very well". I've tested it out on a RPG game running on a workstation on the other side of the house (using CAT5 cables of I'm guessing ~50ft) to see how it handles demanding graphics, and it has very light artifacting. Specifically, if I look at the monitor less than 1ft away, I can see a small number of pixels flickering randomly for a small fraction of a second. But sitting 2ft away or more, and I can't even see them.I took an image of my monitor and at one moment in time, and I think I can spot 5 pixels being disrupted, which you can see in the red boxes I added. Again, they flicker on/off so fast, and so randomly, that you don't notice unless you're looking for it less than 1ft away. I expect that if I used CAT6+ cables, then there would be even less artifacting.As someone who doesn't intend to use the workstation for entertainment, this artifacting is perfectly acceptable -- my workstation is big and noisy, and I am glad to be able to keep it from from where I work. And even if I were to use it for gaming/entertainment, I would not personally be dissatisfied.I also discerned absolutely no time lag with the USB connections. So overall I am very pleased with this product.
Recommended Products