Don't let the small size fool you, this has impressive picture quality and fast response to my monitor. I did need some help with getting a longer cable and their Customer Service was very quick and helped me out. Will definitely recommend and will be obtaining another one for my other vehicle.

Absolutely amazing product and customer service. Especially for the price! The camera is well-built, feels like quality, worked flawlessly right from the first try and the cables are long enough to get all the way to the radio. The camera even has those coloured lines that show up on my screen to help me gauge the distance. Their customer service is also super helpful and responsive.Great buy and I highly recommend it!

I just installed this in a 2007 Toyota Matrix. Mostly the install was pretty easy but a bit of work. I had to pull the lift hatch interior pannel part way and snake a fine cable to pull the camera harness through to the rubber boot at the top of the hatch. I wish the wire from the camera was another 6 inches longer as I would have been able to feed it through the boot but I wound up having to feed the female 4 pin through it and that was quite tight getting it through but with a little lube I managed to get it through. Took my trigger power from the tail light and to make this an easy splice I removed the 3 -10 mm nuts an pulled the tail light. The rest of the install was pretty simple. I recommend this camera for it's quality and simplicity of install. Works perfectly with my pioneer head unit.

Usually don’t write reviews but this camera was easy to install and worked brilliantly with a KENWOOD deck. Nice and clear image. Instructions were good as well. Best part is that it’s small so is easy to install in tight areas and comes with different mounting options as well.

Solid back-up camera. Comes with an 8 meter RCA + Power cable, and the camera side has its own cable which is also about a meter long. I've installed 2 of these now on full size trucks. I like that the license plate bracket tucks behind the license plate so the install looks tidy and clean. The only feature I can't commend on is the AHD resolution as neither of the head units I used support it. However the "normal" lower resolution looks good. The night vision is effective. The only suggestion I would make for improvement is to also include a ground along with the power on the 8 meter cable. As it comes you either need to ground the camera somewhere within about a meter of where you mount it, or you'll need to provide your own extra ground wire to extend it. Personally I prefer to grab my power and ground both at the dashboard rather than grounding with a self-tapper somewhere at the back of the vehicle.

UPDATE - Seller sent me a warranty replacement, stating that the product had a 3 year warranty.The new item works great! The image is clear and I'm very happy with it.Regarding the installation of the new unit, I only had to replace the camera unit itself rather than re-run all cables which definately saved time.Some background to the original unit failure; I noticed that the original unit failed during the winter when we were getting a fair amount of rain and freezing temperatures. When the weather improved, the camera began to opperate intermittantely but the image seemed cloudier that when I first installed. I was curious about the failure, so after installing the new unit, I opened the old one for inspection. On the inside, there was good potting to seal the unit from water instrusion, however, I did see signs of water with oxidation on the aluminum housing interior. I believe that water got into the camera, froze, and prevented functionality. When temps rose and the camera dried out, partial funtionality returned. To prevent issues with the new unit, I used a combination of hot glue in the screw holes and self-annealing tape around the housing seam to bolster the water resistance. This is probably overkill, but I don't want to go through another install.All in all, I'm happy with the product and the seller.OLD REVIEW:I really liked this product for the first month.... then it started crapping out and I got pretty frustrated. While the product worked, I was pleased with the image quality. Regarding installation, I felt that it was about as easy as installing any backup camera could be that requires routing cables.After a month, the camera began to bounce between a static images and 'no connection'. A month later, the camera came back on which gave me hope.... but then it stopped again.The installation of any backup camera is a pain when it comes to cleanly routing the cables. As such, I took great care to ensure all connections were robust, by solding, using strain relief, and reinforcing connections with splicing tape to assure they did not separate.Beware before you buy.... I don't typically leave poor reviews, but I don't want others to suffer through an install only to have to do it again.

Camerea has very good picture on my head unit. Install was very easy, although we had to modify the wiring to get power all the way from the head unit to the camera since my head unit automatically switches to the backup camera when the jeep is put in reverse. Didn't have to connect it to the reverse wire in the rear of the vehicle.

Back up camera works great. Seller was very quick to respond with the extension p4 cable. Highly recommend you request for extension cable before install. Easy install. Hardest part was to snake the cable through the trunk hatch sleeve, rest was pretty straight forward with the wiring to the head unit and reverse light wiring.Clear during the day and night

Excellent camera, quality, night vision ... everything as described, service great. I did not hesitate to recommend this camera...I have no regret for this. Thanks to the people that sold this item.I'm very happy with that and also want to thank the company that sent to me a gift, a USB charger for my VUS, Their camera works very well, is clear and works nicely at night alsoHector DiazQuebec, Canada

This is a review for the HD05 Camera (w/license plate bracket). I've not been paid nor incentivized to provide review. Rarely do I write reviews, but I feel this product (and Seller) deserve one. 5 star+I knew little to anything about aftermarket reverse cameras as I've had various fty. installed cameras (since 2006).In other words, I've never had to look for (nor hv. experience with quality of) an aftermarket camera.However, I do hv. a vehicle without any reverse camera, and when my HU (aka radio) needed replacement and the new HU had an option to add cameras I figured let me add a reverse camera.So I began researching the myriad options on Amazon. So many looked to have similar function/image quality (as well as similar issues like fogging or water damage after time). So how is one to choose?!Of course the experience with Seller (aka reviews) could be important (after all if such product fails down the road e.g. fog/water you need a good seller to back it). However, what immediately caught my attention here what that the Seller (or maker) claimed to have studied the many camera options & issues but more importantly found a way to distinguish their item from (most of) the rest. Whereas most if not all similar items on Amzn are plastic housing, theirs was METAL. The watertight seal (nano technology) also seemed to focus on the main quality/defect issues (fog/water damage over time). The claim (and sounds legitimate) is that plastic contracts/expands with weather over time compromising a camera's seal (whereas metal doesn't). That's prob. true (depends on metal type also) and only time will tell if this camera holds up (better) b/c I just installed it a few days ago.When I removed the product from box, I immediately noticed the quality feel and weight of the item (just as others). In fact, the weight makes it lightly that it's steel or similar (rather than aluminum), so if contracts or expands at all (over time) steel (I believe) will be less apt (if at all) to change (and certainly to warp).Too technical, sorry. Let's get to the point.Installation wasn't the easiest (at least for me) but the hardest (aka time consuming) part is really running the wiring from the HU to back. The 4 pin (red) connecter is great b/c it allows just a small(er) hole to be made near license plate. Make sure you connect the ground wire (see instructions) securely to a good bolt affixed to car. That will make the difference between a great picture and poor (or no) picture. Don't ask how I know :(In doing research about wiring cams, (especially in cars with Canbus), it's highly recommended to get power to camera using a stable constant 12V source (ex. cig lighter wire or tap a fuse, etc.), RATHER than powering it strictly from the reverse wire (near blub or elsewhere). You did this by way of a relay (search web). The reverse wire serves (only) as a trigger to close the relay so that the 12V stable power source from elsewhere (which is also connected to relay, then provides the screen its power (not the reverse wire....that's just the trigger). You will get best picture this way. This step may or may not be necessary on your car (some can get away with using the reverse wire directly for both power and trigger and without buying a spearate relay to wire up as described).I didn't finish wiring by relay b/c a little bit more time consuming and found that when I grounded well the reverse wire (alone) as power provided an acceptable picture for me.Picture is excellent on this camera. Plenty bright at night too (and I don't hv. LED reverse lights)!Seller is fantastic!!! Alice answers promptly always, great attitude and was able to help (even above the call of duty) when I was having an issue. They are there to back the product, no question!Great experience so far! Buy it; it's great and seller is great!