Your cart is empty.
Your cart is empty.Product Description
1 in 8 Out 40Amp Connector Power Splitter Distributor Source Strip Module
- Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1.
- With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A.
- Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06".
- Overall Dimensions(maximum, w/o cables): L180mm x W62mm x H33mm / 7.09"x2.44"x1.30". Gross weight: 300g, Net weight: 230g.
- Packing list: 1x Distribution module, 9x black power pole housings, 9x red power pole housings, 9x PVC cover flame retardant sleeve, 18x silver plated copper 30A 14-12AWG power pole contacts, 2x tinned copper 45A 12-10AWG power pole contacts.
James Stallings
Reviewed in the United States on January 8, 2025
The device is amazing, well built and performs perfectly. The delivery driver was friendly and courteous.The package was a day late, however, much like half of everything I've ordered over the past few months.It really makes me question the value of our years-old Prime subscription.
Tim McAnally
Reviewed in the United States on January 31, 2025
Update: bought over 2yrs ago. Loose connection became permanent so I don’t recommend this product any longer.Great product. Connections can get a little loose but just reseat
SadSack
Reviewed in the United States on January 2, 2025
In my ham shack I noticed I was getting quite a number of 'wall worts' in operation which powered the numerous devices used to meter and monitor radio equipment. As each wall wort is a possible source of RF interference I got a nice DC power supply and converted all the 12V wall worts to power poles and now those devices are all fed through this. It is working fine and certainly freed up a number of receptacles.
Mark
Reviewed in the United States on September 27, 2024
Good value. Received as expected. Power cord connectors with shrouds included in the kit. Cleaned up my rat's nest of wires for my RV ham radio equipment.
Jay
Reviewed in the United States on August 13, 2024
Works perfect. All I had to do was install the correct size fuses for my needs. It does come with all the fuses shown but, they were too big for my use. My use was for one of our ham radio club's VHF repeater setup. Now the whole repeater station has battery backup when the power goes out. Well built. This is the second unit purchased and I have plans to purchase more.
Dallasbuyer
Reviewed in the United States on July 19, 2024
The cost is a little high but much cheaper than multiple fuse holders. It uses automotive fuses so it is versatile. The fuse reaction time for this type of fuse is too slow for some electronic applications.
cavalierdog
Reviewed in the United States on October 3, 2024
I received the power distributor, and hooked it up and tested it, and it works. Everything fits. But the surprise is that besides the main unit, it also came with some power pole connector pieces, including some boots, and that is just the extra professional touch that made me smile.Everything is very clearly labeled, VERY much so, which is great for a product that is usually stuck under the desk or shelf with bad lighting.This product looks like a second- or third-generation version and is well thought-out and well manufactured. And the different fuses for different current levels are the proper different colors which also adds to the usability and my comment about being well labeled.Super product, works for me, and does exactly what I need.
izmeth s.
Reviewed in Canada on June 25, 2023
Its a great product for running Ham equipment, works perfectly for me.
Robert Seb
Reviewed in Canada on March 25, 2023
Bought this to compliment our Bluetti.The DC Aviation connector to DC out 30amp connects directly to DC in on this combiner.Allows for easy DC connections to various devices and easy swapping on or off as things change.It’s a nice self contained and appears safe box with no place for loose wires and no place for confusion.Easy place for all the fuses and easy to change them.
Zul Ali
Reviewed in Singapore on February 15, 2023
It's not genuine powerpole connectors, but connection fits though a bit too tight to insert in.
oldtechie
Reviewed in the United Kingdom on October 27, 2023
Does the job and easier than making your own. Probably best avoided for heavy current loads. As with all connectors, do not disconnect whilst on load.I would buy again.Liked: Fixing tabsDisliked 1: Contacts were strips of metal, not Anderson shaped contacts. Printed circuit interior rather than real wires.Disliked 2: Relatively thin metal construction.
Tom T.
Reviewed in the United States on August 23, 2022
In general, I am very pleased with the design of this DC distribution panel. The extra jumpers for current handling and lower circuit resistance are impressive. The power-poll’s appear to be Anderson, and the fuse holders are of high quality.The only things missing were LED’s to indicate an open fuse, but circuitry, and silkscreen labels are there. Simple desoldering of empty holes, and adding appropriate components. I used white LED’s, and aimed them to illuminate the open fuse, no matter what color it is. My resistor selection (1K) was made to get a significant brightness to illuminate even the darkest colored fuses, but also keep current draw low, just 10mA @ 13.2V. Be careful of the input fuse LED polarity. It reversed from the rest of the board. The warranty is gone, but with the obvious quality, and simple circuit, I see no reason to worry about that. The LED’s I used are available here on Amazon (ASIN # B077XD19J5), $6.99 as of Aug. 2022.
Chris - DG7CF
Reviewed in Germany on October 26, 2021
Ich habe es in meinem Boot und Shack verbaut insgesamt 4 von den Verteilern.Alles bestens gute Verarbeitung und auch bei maximaler Belastung keine Probleme.
Recommended Products