Your cart is empty.
Your cart is empty. Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
Attenuation ratio: 1x and 10x optional. Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.
Features:
Performance & Characteristics
Attenuation ratio: 1× and 10× optional.
Portable design according with ergonomics.
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of European Community.
Specifications:
Attenuation:x1 x10
Input resistance:1MΩ: 10MΩ
Input capacitance: x1: 85pF-115pF x10: 18.5pF-22.5pF
Compensation scope: 15pF-35pF
System bandwidth: x1: DC-6MHz x10: DC-200MHz
Input voltage: x1: Cable length:120cm
Temperature scope:Operation: -10℃--+50℃ Not Operation: -20℃--+75℃ Humidity: ≤85% (Relative humidity)
Application Fields:
Compatible with domestic and international digital and analog oscilloscopes in relevant frequency. Measurement in intermediate and low frequency signals. Package Including:
Accessories included by PP series passive voltage rapier
● Operation manual
● Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
● Contractive-type acuminate hook
● 12cm earth wire with alligator clip
● 3 pairs of colorized cable markers
● Locating sleeve adapts to IC testing.
Customer
Reviewed in the United States on March 8, 2022
This probe was exactly what I was looking for. It is durable and works as expected.
Customer
Reviewed in the United States on March 8, 2022
This probe was exactly what I was looking for. It is durable and works as expected.
Gary M. Webster
Reviewed in the United States on April 9, 2022
I have several PP-200 probes. They work well on small signals. Used one of these probes to measure the output of my Ham transceiver. The output was 100 volts peak to peak. Worked well on all bands, until I measured the 10 meter (28MHz) signal. The probe immediately failed. Signal was around 90 volts peak to peak. Switched to another PP-200 probe and it failed right away also. So keep the input signals small.
Gary M. Webster
Reviewed in the United States on April 9, 2022
I have several PP-200 probes. They work well on small signals. Used one of these probes to measure the output of my Ham transceiver. The output was 100 volts peak to peak. Worked well on all bands, until I measured the 10 meter (28MHz) signal. The probe immediately failed. Signal was around 90 volts peak to peak. Switched to another PP-200 probe and it failed right away also. So keep the input signals small.
Alexey T.
Reviewed in the United States on December 24, 2021
1. I have compared it with original 200Mhz tektronix probes, it is junk - sane not clear and bad bnc contact, it doesn't hold 200Mhz, bad signal already after 80Mhz2. it is not returnable, I could get refund thru amazon helpdesk only, seller did something to put the item in not returnable category.
Alexey T.
Reviewed in the United States on December 24, 2021
1. I have compared it with original 200Mhz tektronix probes, it is junk - sane not clear and bad bnc contact, it doesn't hold 200Mhz, bad signal already after 80Mhz2. it is not returnable, I could get refund thru amazon helpdesk only, seller did something to put the item in not returnable category.
Noah Gray
Reviewed in the United States on July 18, 2020
They work great! I grabbed four of these and they perform like I'd expect. Calibrated easily, no ringing from my AWG at 10-30mhz on my 100mhz scope.
Noah Gray
Reviewed in the United States on July 18, 2020
They work great! I grabbed four of these and they perform like I'd expect. Calibrated easily, no ringing from my AWG at 10-30mhz on my 100mhz scope.
Benjamin R. Gilsdorf
Reviewed in the United States on August 29, 2019
Works as advertised
Benjamin R. Gilsdorf
Reviewed in the United States on August 29, 2019
Works as advertised
rob4560
Reviewed in the United States on February 26, 2019
This is an inexpensive probe for home use. The quality of materials is okay and it works, which is all you can expect of an inexpensive probe. My one complaint would be that it is not easy to fully insert the tip into the clip and you can get a bad connection. It feels like it's fully inserted, but isn't, a little more push and it's good. You get what you pay for.
rob4560
Reviewed in the United States on February 26, 2019
This is an inexpensive probe for home use. The quality of materials is okay and it works, which is all you can expect of an inexpensive probe. My one complaint would be that it is not easy to fully insert the tip into the clip and you can get a bad connection. It feels like it's fully inserted, but isn't, a little more push and it's good. You get what you pay for.
Gary
Reviewed in the United States on November 24, 2018
These probes appeared to not be shielded properly. I'm not sure which end it was at but the shield on the cables may not have been attached. Hooked to the scope they would trigger a trace by just holding them in my hand and the trace would change with movement.
Gary
Reviewed in the United States on November 24, 2018
These probes appeared to not be shielded properly. I'm not sure which end it was at but the shield on the cables may not have been attached. Hooked to the scope they would trigger a trace by just holding them in my hand and the trace would change with movement.
Recommended Products
