Your cart is empty.
Your cart is empty.Product Description
Product introduction：
100MHz, 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.). Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply.
PC software only supports windows7/8/10 32-bit and 64-bit, do not support OS
Function Selection
There are three functions of vehicle diagnosis, oscilloscope and signal generator, including 78 types of vehicle diagnosis function.
Reference Waveform
Over 80 types of standard reference waveform inside and can be callout or close with one button. It is convenient to be compared.
Multilanguage Support
Support the display surface in Chinese, English, German language, and it can be switched freely.
Measurement Method
20 types of automatic measurement method which can be callout or close with one button. It is convenient and visual to read out the result.
One Button Screenshot
Save the current waveform and generate pictures. Storage location is optional and easy to find.
Quick Guide
Callout the quick guide column with one button. There are special vedio guide for each vehicle diagnosis function, including wiring method, adjustment method, reference waveform etc. And it is supported to be checked through scanning the QR code.
The result can be printed with one button and generate diagnosis report which is easy to be saved and recorded.
REF Comparison Waveform
The user can save the waveform as REF format and callout it again when you need to compare the two waveforms catched in different time.
Data Storage
The diagnosis result can be saved as the format of txt, csv, rfc, xls, doc, jpg and etc. It is convenient to be checked and compared later.
8CH Vehicle Diagnosis
8CH signal can be measured simultaneously. The measurement voltage of each channel can be adjusted independently. You can choose to open or close each channel.
Waveform Record
Support to record and replay the waveform. The waveform can be save into the computer hard disk and easy to read. There is no limit to the record time which can long-time measure and record the waveform for troubleshooting.
Cursor Measurement
Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
Color and Lightness
The background color is optional as user's preference. And the lightness of waveform and gridding is settable.
USB Communication
USB2.0 power supply + communication interface, plug and play, and support hot plugging.
Signal Generator
Signal generator function, can simulate crankshaft and camshaft signal.
cameron calkins
Reviewed in the United States on March 9, 2025
After hours of frustration and very little training available for this product. I threw it away and bought a pico. They do make decent accessories though. You get what you pay for.
Hal
Reviewed in the United States on February 6, 2025
Works as described great for diagnosing problems nobody can find. Love it
Julb
Reviewed in Germany on February 25, 2025
Erfüllt ausnahmslos seinen Zweck, Preis-/Leistung haut absolut hin.
Daniel
Reviewed in the United States on January 27, 2025
Buena
Adwar l.
Reviewed in the United States on January 13, 2025
Una interfaz que trae los programas listos para comparar con las imágenes de los campos en el sistema de tu vehículo para comparar
Kevin
Reviewed in Mexico on July 3, 2024
Producto completo y bueno para el diagnóstico
Simplyy Blessed
Reviewed in the United States on July 10, 2024
It worked with t8 scanner from Icon tools just need to download an app to make it work
Juan A.
Reviewed in Mexico on February 13, 2023
Excelente calidad lo recomiendo mucho.
snawdy
Reviewed in Mexico on July 8, 2022
Buen producto
Benito Fuentes guarin
Reviewed in Mexico on April 28, 2022
Creo que lo mejor que ay lo recomiendo funciona muy bien sobre todo muy buen precio excelente producto
C. W.
Reviewed in the United States on January 25, 2021
I didn't want to drop hundreds of dollars into an oscilloscope right now, but needed the ability to watch CAN bits fly in near real time for an Arduino project I am doing. Without this wonderful tool, I doubt I would have figured out the issue was the timing crystals on the CAN breakout boards. Definitely worth it to provide many more diagnostic functions.Only gripe is I work with data recorders a lot and would love to find a software that allowed this to be the input to recording raw voltages instead of just the scope function.
ibby
Reviewed in the United States on March 28, 2020
I am a diesel technician that specializes in electrical diagnostics. I have a pocket scope and a original Snapon modis. I bought this scope to be able to get more in depth captures. I was a little worried about the quality for the cost being so cheap. I’ve used it for about a month now and it’s worked flawlessly. The value for the money is great because I can’t afford to buy a pico at this time. The driver and software was easily downloaded from hantek’s website. I’ve scoped Isb diesel Bosch injectors Ive scoped crank position sensors I’ve scoped relative compression tests. My only complaint is the captures don’t give a numerical value for the wave form but if you know what you’re looking for it won’t make much difference. Great entry level scope to learn on.
Maynard Philbrok
Reviewed in the United States on February 16, 2020
Although for the money this unit is a good deal, I was hopping the driver and software would install on a Windows Vista laptop which I have a few that are used mainly for electronic work, Plc coding etc.. The Main program installs ok and runs in demo mode but the driver will not for vista.. or anything older I guess. In version C I believe the USB interface was changed, the drivers for the older models do install but won't match the USB interface in the C model. I just order a Windows 10 tablet (RCA 10.1 inch ) that has two USB ports on it. The help file does state it requires windows 7 and up but does not seem to state that here on the site when looking at it.. Just
Recommended Products