Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #4,432 in Musical Instruments (See Top 100 in Musical Instruments)
- #14 in Electric Guitar Bridges & Bridge Parts
Product Description
GM005+GS001 Stop Bar Tailpiece with Anchors +Tune O Matic Guitar Bridge Set
Benefits:
- Reduced string breakage - increased tuning stability.
- Ideal replacement bridge compatible with LP style, EPI or any 6 strings guitar that has Tune-O-Matic setup.
- Lightweight, high strength zinc alloy bridge and tailpieces that boosts harmonic content.
Features:
- Replacement/upgrade bridge with posts for Tune-o-Matic 6 stringed instruments.
- The GM005+GS001 set is an ideal replacement bridge and stop bar compatible with LP style, EPI or any 6 strings guitar that has a Tune-O-Matic setup.
- Easy to install and convenient to use.
- Made of high-grade zinc alloy material, durable and sturdy.
- Low-friction zinc alloy saddles let the strings move freely and return to the accurate pitch.
- 5 Colors available: Bronze, chrome, black, rust color, gold.
Specifications:
- Bridge Size: 88.9 x 13.7mm / 3.5 x 0.54 in
- String Spacing: 10.5mm / 0.41 in
- Bridge Post Spacing: 73.9mm / 2.91 in
- Tailpiece Studs Spacing: Approx. 81.9 mm / 3.23 in.
- Whole tailpiece length: Approx. 101 mm / 3.98 in.
- Tailpiece String spacing: Approx. 10.5 mm / 0.41 in.
- Please check the parameter drawing in the attached pics before placing your order.
GM005 INSTALLATION:
- Determine the scale length of your neck. To do this, measure the length from the nut to the 12th fret then double it, and mark the spot.
- Align the saddles of your bridge right on top of the marked spot and make sure the entire bridge is centered relative to the neck.
- Mark the screw holes, drill, and screw down the bridge.
GS001 INSTALLATION:
- Determine the position or placement of your GM005 guitar bridge.
- From there, measure about 38mm - 44.5mm back and mark that spot for your stop bar.
- Make sure the stop bar is also centered on the neck, just like the bridge.
- Screw the stopbar and fix it into your guitar.
Seth webb
Reviewed in the United States on February 19, 2025
another another good brand if you’re looking for quality affordable parts
Jaysn
Reviewed in the United States on January 26, 2025
BE AWARE!!!! This product IS NOT for USA Gibson guitar. The bridge saddles on this are around 52.5mm while the Gibson is 52mm. The bridge top post is around 6mm, Gibson is around 5mm. The bridge anchors are 12mm, Gibson is around 6mm (Picture support). For the tailpiece the posts are 8mm coarse thread, Gibson is 5/16 x 24. Also the tailpiece anchors are 12mm (same as the bridge anchors), the Gibson is 1/2” which is larger.With all that, these are great pieces. I’m going to keep them for my parts pile when I’m working on an imported LP like an Epi or any other LP based guitar. These are extremely solid as well. Factory bridge weighs 1oz, Guyker weighs 2oz. Factory tailpiece weighs 1.2oz, Guyker weighs 2.6oz. Just shows you these $15-$20 bridge/tailpiece are better built than Gibson is putting on their standard/studio models.
Luis chavarria
Reviewed in the United States on January 23, 2025
I purchased this bridge and tail piece, and I'm happy with the final result, the fit was perfect and now my guitar looks even better than before and it helped me with some tuning issues I had. I was also suprised of the quality which is really good. I got something I would have expected from more expensive products.
Günter Rudigier
Reviewed in Germany on January 13, 2025
Hab bei einem günstigen Bausatz die orig. Bridge gegen diese ausgetauscht und die Verarbeitung bzw. Qualität ist aus meiner sicht sehr gut. Lässt sich super einstellen und alle Auflageflächen liegen schön und satt auf.
Lance
Reviewed in the United States on January 12, 2025
I have two ESP LTD EC256s. This bridge and tailpiece are a huge upgrade. The break angle is so much better and intonation is a breeze. Best part is you don't even have to pull the inserts out of the guitar body. Just screw in the posts and drop it on. Literally 5 minutes. Gonna order another one for my Blue EC256. Great quality easy installation.
Gerardo G.
Reviewed in the United States on September 22, 2024
I have a Donner dlp124 and I wanted to improve it and also blackened, this bridge is a perfect match and a serious improvement on the guitar. I highly recommend it
Chris Martins
Reviewed in France on August 18, 2024
Expédié et reçu en quelques jours, la qualité au déballage ne fait aucun doute. C'est très propre et parfaitement compatible avec le kit Thomann sur lequel ce sera installé. Mention très bien sur le double packaging qui protège parfaitement les pièces.
Pamela Chandler
Reviewed in the United Kingdom on February 29, 2024
This bridge set is excellent quality. I was really surprised considering the price paid. I put it on a Gretsch because I didn’t like the V shaped one Gretsch provided. It was a perfect fit and the easiest mod I’ve ever done. 5 stars
Customer
Reviewed in the United Kingdom on November 12, 2024
Great bargain, fits my Tokai perfectly and so far the finish is holding up well. Good value parts.
Sal Chandon
Reviewed in the United States on November 1, 2024
Beautiful finish, perfect fit. I appreciate the nearly invisible location of the miniature precision set screws to lock these pieces in place.
Keith
Reviewed in the United States on October 15, 2024
This really exceeded my expectations. Compared to my other original tune-o-matic's, which are several times more expensive, the initial quality seems about equal. Finish is nice and even, we will see how it lasts the test of time. The rollers are definitely more comfortable on the hand than the wedge style and I have not yet had issues with strings popping off as I've seen in a few other reviews. Currently using 11-54's. One word of caution though, this bridge is slightly taller than a Tone Pros original and I lucked out with bottoming out the mounting studs for the bridge to get my string height correct. If your Tone Pros is already bottomed out, this may be too tall for you. I was only focused on the width measurements.
Customer
Reviewed in the United States on December 31, 2023
I bought these for the rollers. Strings pull better and last longer with the rollers.
Daniel
Reviewed in Spain on December 26, 2023
La presentación en el paquete es un 10, y la calidad de las piezas, casi sin holguras en los rodillos de las cuerdas, el acabado sobre metal bien duro (parece que resiste bien los rayones) y el ajuste de lo bien que encajan unas piezas con otras... Por 25€??!! Repetiré seguro.
Recommended Products