Your cart is empty.
Your cart is empty.Product Description
Features
Durable
Made of high quality of aluminum and stainless steel material for durability.
No Electric Power Needed
Solar energy sourced, no operating cost.
Automatic
Automatically open or close the greenhouse vents as temperature rises or drops.
Overheating Protection
This automatic window opener will help you maintaining the best growing temperature and prevent your greenhouse from overheating.
Strong Force
Lifts up to 15.4 Lbs(7kgs),suitable for most of greenhouse window and vent.
Easy installation
Comes with a fitting accessory pack and a detailed manual for easy installation.
Working Condition
- The start open temperature can be adjusted from15℃ to 25℃(60℉ to 77℉).(Adjust:Rotate the cylinder clockwise to lower the open temperature or anticlockwise to increase open temperature.)
- When the temperature reaches 30℃ ( 86℉ ) or above, the window will be fully opened.
- The maximum open distance, from window sill to bottom rail, is about 45cm (18”).
- Maximum weight of the window is 7kg (15.4 lb).
Storage&Maintenance
- All moving parts need to be lubricated after installation. Occasional lubricate is recommended.
- Please take off the cylinder from the opener when the window is not to be opened such as during winter time, to avoid any accident opening due to warm up climate.
- Lubricate and check the piston rod, make sure it can work smoothly if there is long time no work.
- The vent opener should be stored at a cool and dry place.
Sheri Nichols
Reviewed in the United States on October 3, 2024
Works great once i designed frame. Will be ordering another to make a side wall door.🤞
Rockrollkidd
Reviewed in the United States on April 30, 2024
Directions could use some improving, but for the mechaniclly inclined, this product is really cool. I have lightweight vents, so i had to drill another hole on the aluminum tube for the pin, so i could adjust lifting pressure. Got it dialed. It starts openning at 75°F.I installed this on a harbor freight green house.Orderd a second opener for the other side. Very pleased.
TXDogLover
Reviewed in the United States on April 3, 2024
Purchased these for our greenhouse. They were easy to install and are working well thus far. We've only had them for a month or two.
Brian Wagner
Reviewed in the United States on April 21, 2024
I used it with a light, 2'x4' polycarbonate panel and wood frame. It simple works. The one assembly issue is the cotter pin which binds a bit.
KKeith
Reviewed in the United States on April 10, 2024
i built custom a "lean to" greenhouse and needed to attach opener to low side of roof. This unit didn't work for me because the piston extends vertically vs horizontally. the unit needed to be installed at the front (low side of the roof, therefore the piston would stick right in my face when getting to the plants on the shelves. Although it didn't work for my design, im sure it would work for other designs. they all seem to be filled with a wax that contracts when cold and expands when heated up. I ended up buying Pelram vent opener since the piston lays horizontal and is out of the way.
Laknormn
Reviewed in the United States on May 24, 2023
Getting this together was a little bit of a struggle as it warms up and starts expanding. Be sure to put the cylinder in the freezer for a bit before trying to put the together. I’m using it in my custom built greenhouse. The window it’s opening is just a piece of plastic so we don’t even have it connected to the window. Work good. May get another for the other end of the greenhouse
Stan
Reviewed in the United States on July 16, 2022
As part of the instructions you need to attach the cylinder into the unit while in a closed position i.e with the cylinder retracted. No where in the instructions does it mention if the temperature during installation is a warm day that the cylinder will not compress and you cannot assemble. I had to wrap a bag of ice around the cylinder to get it to close to complete the assembly. Sounds easy but with horrible directions it took some trial and error before I came up with the idea of the ice. Having that been said it will not close all the way without an ice pack, and yes I have turned the cylinder in both directions. Again the directions are misleading as to clockwise or "anti clockwise" whatever the He** that means. The word they ware struggling with is counter clockwise: Update: No way to bypass in a storm if you don't want the wind to grab it because it's warm and open. No override. Very Light metal/ aluminum.
RDUBYA
Reviewed in the United States on December 29, 2021
This thing works like a champ. Took longer to remove the old hardware than to put this in. Opens the roof vent at 70 degrees and get wider as it gets hotter. Great investment considering you don't need batteries or solar panels. It just works off the heat and air pressure in the tube. I've only had it in place for a month but so far it's proven to be indispensable.
Recommended Products