Your cart is empty.
Your cart is empty.The HT801 is a single port analog telephone adapter (ATA) that allows users to create a high-quality and manageable IP telephony solution for residential and office environments. Its ultra-compact size, voice quality, advanced VoIP functionality, security protection and auto provisioning options enable users to take advantage of VoIP on analog phones. It also allows service providers to offer high quality IP service to their market. The HT801 is an ideal ATA for individual use as well as commercial IP voice deployments worldwide.
The Sisko
Reviewed in the United States on March 4, 2025
Clear calls. No difference at all with the service Spectrum provided for $20/mo.*** Then you have to contract your VOIP service ***I chose VoIP.ms. They helped a lot with transferring my phone number and setting up advanced features. Their customer service is exceptional.
Philip A. Jones
Reviewed in the United States on February 8, 2025
Update: HT01 V2 may have a label on the bottom showing the factory default password. If admin is rejected look there. Deduct one star for the confusion of user guide versions from Grandstream.The most recent user manual documents this. Search for "documentation.grandstream.com/knowledge-base/ht81x-v2-user-guide/"Check whether you can log in before return period expires.Using a new Grandstream HandyTone 801 V2, Admin login fails with the factory default password: admin. Reset button and power cycle do not resolve the problem. Item is useless without being able to login to configure it.On a different Grandstream HandyTone 801 V1 the default password worked. Perhaps this issue is only on V2 models.Returned for replacement.
phiunit
Reviewed in the United States on February 3, 2025
works great. I wanted to bring back an old landline and old wall mounted phone from the 90s into the house. It's also a great setup for kids in the house so they can call 911 if needed. Also they'll be able to call any adult if there's every an emergency. the default password was on the bottom of the device. It's not admin/admin. took a bit of googling to find this. Once I was in, I followed the voip.ms instructions and got my DID number running with e911. I wired it into my home's old landline and now all the rj11 ports in every room has a dial tone. $2.38 a month from voip.ms is worth it.
nate
Reviewed in the United States on February 26, 2025
No tech support at all to connect to VerizonNever could get it set up, but not a tech Savoy
BM from Boston
Reviewed in the United States on February 13, 2025
I bought to replace the MagicJack that I was not happy with. This is the V2 unit not the V1. Someone said the password didn't work as admin. This is true for the V2 the password is printed on the label on the back of the unit. Set up was not the same as the sample shown on the voip.ms web site, but it will set up and works great once set up. Make sure you update the firmware to latest from Grandstream web site. I couldn't be happier with HT801 V2 and voip.ms combo. Saving over $20/month over Spectrum. Once set up the quality of calls and the features are really good.
meepx2
Reviewed in the United States on January 7, 2025
I confirmed that the seller TeleDirect is selling HT801 V2 with the US style plug.I have tested both V1 and V2 with voip(.ms) and they both work fine, incoming and outgoing calls.Both V1 and V2 can be powered from a USB type A hub. For example, I'm using one of the USB type-A ports on my WiFi router to power the GrandStream device.Here are the differences I have noticed, but there are probably more.Differences:The major difference is the webportal is majorly updated. It looks more modern, it's faster, more organized, and provides a find setting feature.The only difference on the physical device I saw was one of the blue lights and writing over top of the ethernet port. V1 used an Earth-arrow icon. V2 replaced the Earth-arrow icon with the letters "NET".Password change: default username / passwordV1: admin / adminV2: admin / Note: the firmware for V1 and V2 are different links:V1: Release_HT801_1.0.57.1.zipV2: Release_HT80xV2_1.0.3.5.zipRing Power:V1: Had a checkbox "High Ring Power"V2: has a ComboBox with multiple options: 45Vrms, 50Vrms, 55VrmsUpdating the firmware manually in V2 is much faster. The only thing is it gives an error "Reboot failed" but it succeeded.Data-sheet differences:Codecs:V2: added G.722Pass-through:V1: Short/Long Haul Ring Load 2 REN: Up to 1km on 24 AWGV2: Short/Long Haul Ring Load 5 REN: Up to 1km on 24 AWGNetwork-Protocols:V2: added SSH, SNMP, IMS/3GPP, IPoEQoS:V2: added Layer 2 (802.1Q VLAN, SIP/RTP 802.1p)Provisioning and Control & Management Syslog support:V2: removed telnet and added SSHCompliance:V2: added K.21
Michael S.
Reviewed in the United States on August 3, 2024
This is the best single line ATA you can get. It supports pulse dialing and it has a REN of 5 just like the POTS lines did. It works nice with VoIP.ms, which is the best provider in my opinion. This thing is a little difficult to set up, but if you follow a tutorial for the settings to change for your provider it wont be so hard. I have had no issues with this yet. Im glad i chose to upgrade from my cell2jqack to this. My experience with calls have been pretty good. The quality is only bad when the internet is bad. If you have any sort of T-Mobile internet, you will not get this to work unless you turn on TLS on this device and your providers settings. If you use VoIP.ms, they tell you how to change to TLS on their end and on the ATAs end.Conclusion: I’m glad i bought this ata.
JMS
Reviewed in the United States on December 13, 2024
Moved into a house with an old rotary phone, and really wanted to use it. This was the magic item that got it to work... cheap VOIP plan plus this adapter from phone to router, and I had it up and running with almost no effort. I was actually kind of dumbfounded that it was so easy... I had blocked off 3-4 hours of my night to install, set up, and troubleshoot what I assumed was going to be error after error trying to get this to work with a rotary phone, but all in all in took about 15 minutes! Love this thing!
Cliente
Reviewed in Spain on November 7, 2024
Hace su trabajo perfectamente una vez configurado. Es un poco entretenido para configurarlo correctamente. Yo lo logré después de ver un vídeo de naseros.com. Desde aquí, Muchas gracias a Naseros por sus vídeos para configurar distintos Routers y auxiliares de telefonía.
Dennis Heitmann
Reviewed in Germany on June 18, 2023
Die Einrichtung erfordert Fachwissen und einiges an Zeit. Anderseits kann man wirklich jeden denkbaren Parameter konfigurieren. Leider gibt es keine Presets für übliche große Telcos bzw. Ländereinstellungen. Ein optionaler Konfigurationsassistent wäre schön.
ahmed awlyaa
Reviewed in Saudi Arabia on April 18, 2023
اذا تلفونك قديم او لاسلكي وتريد استخدامه كتلفون شبكة(ip phone, voip)، هذا هو الحل
JF Gadget Guy
Reviewed in Canada on January 18, 2020
Tired of paying 70 dollars a month for mostly people I don’t want to talk to to try to scam me, sell me some service I don’t need, etc, I looked at options. Keeping the number I’ve had for 30 years, and having a single number that mom and a few others could call and talk to whoever is home is nice. Giving this number to most businesses means that telemarketing calls don’t come to my cell phone.This was the same device used by a 3rd party provider called freephoneline.ca. I decided to try to purchase the device and pay a one time fee to connect with them vs pay a VERY small monthly fee.Everything is working great. Calls are reliable. Device works fine, and by unhooking the telco access at my inside junction, and connecting this to one jack, all of my existing jacks work.The device is great, but I would not recommend this (or any other similar device) unless you have a good support with your provider (I didn’t - but they had an online user forum and this was the device they use) or you are technically strong (30 years in IT). Many people would be better off getting the device with support, through their provider.Setup is easy, but there are 2 or 3 dozen settings many of which need to match your provider, or else you could have no calls, dropped calls, audio but no voice, or other strange things. I was able to get the correct settings online and had it set up and working in about 15 minutes. It has been working great for a couple of months now and I’m glad I did this.
Mohanraj
Reviewed in the United Arab Emirates on August 6, 2019
Works perfectly converted digital line to analog for FAX connectivity. But it works for analog phone lines too.
Recommended Products
