I bought this spray gun about three months ago and when I went to use it, it was broken. I called the supplier and I was out of time to return it. This is one of the worst spray guns that I’ve ever experienced.

Outstanding unit - I'm painting furniture which makes this unit the perfect size to do the job. Easy to fill and easy to use in any direction. Clean-up doesn't take long at all. I would not recommend for larger tasks like a house however for smaller projects it's perfect.

تستحق الشراء

This is the perfect sprayer for a hobbyist and/or pro! I was able to quickly spray my garage back wall in a few coats with minimal cleanup or touch up required. I would opt for the battery powered variant if I was using this weekly, but for the weekend warrior the value for money of this one is perfect!I was especially happy with how easy it was to use and the ability to lay a constant pressure for a professional finish was honestly what made this the best purchase.Highly recommend you give this a try

El producto es bueno. Ya conocía la marca. Vale la pena si se compra con descuento. Ya que no es inalambrica lo cual limita el uso. No recomiendo para productos con espesores mayores como elastomericos para evitar se tape.

This paint sprayer is fantastic! It’s easy to use and delivers a smooth, even finish. The variable speed control allows for precise application. It’s made my painting projects so much faster and easier! Cleanup is not super difficult but know that the gun will never be 100% clean and will end up with paint on the handle and other plastic parts. Still a lifesaver of a tool!

First time using this sprayer. All in all it worked well. Has a good price point. I followed the instructions very closely and had no issues. It sprayed the thick paint from Sherwin Willians quite well. Clean up takes a bit but super important. I did feel it sprays a bit heavy but it was my first time and with a bit of practice I could improve. I recommend this sprayer.I ordered near Christmas so delivery took way longer than Amazon promised. I rayed a 4 due to delivery issues.

Lors de la mise en route , le pistolet ne fonctionne pas . Aucun SAV !!! Aucun contact.

I'm a DIYer who needed to paint a rental property, including kitchen and bath cabinets, doors, door frames, walls, and ceilings. It was a lot of painting for a guy who does not like to paint, particularly doors and cabinets. My wife, knowing my love of power tools, told me I should consider buying a paint sprayer. I did a fair bit of research on paint sprayers and chatted with employees at my local Sherwin-Williams paint store. I ended up purchasing Graco’s True Coat 360 variable speed airless paint sprayer on Amazon. I’ve been using the sprayer for about 1 month and I absolute love it!Things I Really Like:1. The Graco educational/instructional videos. They made the setup and use easy and gave me some confidence that I could use it in a variety of applications.2. Graco's attention to detail. Which includes the design and function of the sprayer and what is included in the order (lubricant, funnel-strainer system, spray tips, laminated instructions, paint bucket lip, carry bag).3. The variable speed, which I'm glad I purchased. I used a different speed for room and closet doors, door frames, cabinet doors and frames, walls, and ceiling.4. Works great on ceilings. At the time of purchase, I questioned whether the sprayer would work with the tip pointed up. Worked great and so much easier than rolling a popcorn ceiling!5. Not much overspray. I learned to minimize over spray when spraying near the ceiling and floor. Need to cut in with brush – more than you would need to do with a roller. Also found that its best to keep the sprayer perpendicular to the wall when spraying near the ceiling and floor.6. Coverage with one coat, in most cases. I needed to spray a second coat for door frames (without doors attached). Trying to paint them in one coat resulted in paint runs. Occasionally, I needed to spot spray walls and ceilings. This was because I moved the sprayer to quickly, or I was not holding the sprayer perpendicular. I was able to spray doors (~10), when detached from the frame, with one coat (turned out great-so much better than rolling). This includes louvered closet doors. I did paint a couple of doors attached to the frame using two coats. This was necessary because I struggled with developing the skill to paint door frames in one coat and because the faces of the door needed to be painted a different color.7. The inclusion of both a narrow and a wide spray tip. The wide tip worked best for me on doors, walls, and ceilings. I used the narrow tip for door and cabinet frames.8. Light weight. The sprayer itself is very light weight and when filled with paint was easy for me to manage with one hand. My daughter felt more comfortable operating the sprayer using 2 hands.9. Reusable flex liners. I used 2 liners for the entire project. I discarded one after completing the project because of paint on the outside of the liner – even though the liner remained pliable.Additional Comments1. The storage procedures needs to be clearly described and included on the laminated instructions. Should armor solution be used between daily, weekly, or long term use? I found that a residual amount of the armor solution remains in the sprayer in the cup portion beyond the screen filter, which then mixes with the paint when priming the sprayer. Some of it can be sprayed out as waste but some of the armor pools on the paint in the container. I’m not sure if this is expected or I’m not following proper procedures. Part on my confusion stems from the fact that the procedures described in the following videos are different:TrueCoat 360 Quick Start Series - Cleanup & StorageTrueCoat 360 - How To Store Your Sprayer2. There is a fair bit of paint that remains in the sprayer container after the sprayer stops spraying paint. The volume remaining is too small to pour back into paint bucket. This is not a criticism of the design, as paint waste is inherent in any painting project. I learned that I could use the residual paint to do touch ups and cut ins. Ordering a second container (Graco 17R821) is helpful in this regard as it comes with a knob that seals the container with paint. I would use the knob on the container with residual paint and use it the paint the next day for cut-in work.

La première fois que je l'utilise... Après bien lu le mode d'emploi pour l'application ainsi le mode d'emploi pour le nettoyage. Je me suis La première fois que je l'utilise... Après avoir bien lu le mode d'emploi pour l'application ainsi le mode d'emploi pour le nettoyage. Je me suis lancé à l'ouvrage... Certes, il me manque de l'expérience pour l'application, mais le résultat est vraiment satisfaisant. Il est certain que la première cela parait compliqué pour démarrer, mais si on lit bien le monde d'emploi tout va très vite. Comme tous les nettoyages ce n'est pas agréable, mais il faut un nettoyage bien approfondi pour être certain d'avoir une bonne utilisation la fois d'après et ce n'est pas plus compliqué que d'autre marque. Je suis très satisfait. à l'ouvrage... Certes, il me manque de l'expérience pour l'application, mais le résultat est vraiment satisfaisant. Il faut un nettoyage bien approfondi pour être certain d'avoir une reprise la prochaine fois. Je suis très satisfait.

The sprayer works excellent, people complain about cleaning but that is the case with all sprayers if you want them to last. When spraying thicker paint wipe off the nozzle every few minutes to avoid dripping as the case with most sprayers. I highly recommend this sprayer. Just remember when using it the first time have the paint volume turned down till you get used to it. It will really lay the paint down fast when turned up.

I had only used larger capacity paint sprayers and wasn't sure about this unit for the cost. I researched HVLP in comparison, but kept coming back to this unit for being able to spray in any angle. In this project I need quantity over quality (painting a few rooms, including a concrete wall where rolling just doesn't get in the pockets). Luckily I was able to borrow one a while back and saw what it was capable of.The good: decent fan width, light weight, some good spare parts in the kitThe bad: gets hot and can overheat pretty fast and scare you into thinking you broke it (I thinned the paint a bit and dialed the power down to about 8 and was able to shoot fairly constantly), an included kickstand would have been nice along with maybe a 3' cord so you can plug it into an outlet by a sink for cleaning.Overall, it did the job well. I let it cool down while refilling the cup and was able to keep the pace going. Take the time to mask anything you don't want paint on and buy a small stiff bristle brush to just keep in the kit to make cleanup much easier on your nerves. Don't try to keep the outside of it spotless - especially during pauses in the job. If you're an OCD clean freak like me, you can just use Goof-Off after you are all done and wipe it off. Oh, and don't forget to pump armor it for its down time in storage.