Shopping Cart

Your cart is empty.

Your cart is empty.

Gila Heat Shield Plus 35% VLT Window Tint, 2ft x 6.5ft

Free shipping on orders over $29.99

$19.99

$ 8 .99 $8.99

In Stock

About this item

  • SIZE: 24 in. x 6.5 ft. - Enough to cover two side windows
  • ADVANCED HEAT REJECTION: Helps keep interiors cooler with up to 40% heat rejected
  • DARKEN WINDOWS: Upgrade your style with 65% light blocked and 35% Visible Light Transmission
  • INCREASED VISIBILITY: Reduces glare, helping you see better and drive safer
  • SCRATCH-RESISTANT: Durable material uses deep-dye technology that lasts
  • PROTECTS INTERIORS: Blocks over 99% of UV rays, helping to keep your interior from fading
  • EASY DIY INSTALLATION: Adhesive film is easy to install with the Gila Complete Window Tint Application Kit (sold separately), no professional installation required


With Gila® HEAT SHIELD PLUS™ you can tint your vehicle with a quality tint at a great price. This product provides all the benefits of our Gila HEAT SHIELD™ products, but with improved heat rejection, thanks to its two-layer dyed and metalized construction. Its 35% Visible Light Transmission also gives your car a sleek look, reduces glare and helps block UV rays to help protect your skin and your car’s interior. Gila’s special adhesive technology and scratch-resistant coating makes it easy to apply this professional quality window tint without a professional installation.


CRG
Reviewed in the United States on July 7, 2024
I'm a fairly handy guy and am capable of most meticulous projects. Installing this window film is one that takes practice. For a first-time shot at it, I was mostly successful, but am a little disappointed with the bubbles and wrinkles. I installed the passenger side, front window of an '08 Honda Odyssey using the recommended install kit. I watched the instructional videos a few times, then followed along as I attempted it. It is not as easy as the pros make it look. After I did one window, I learned quite a bit. There are subtle little things, tips and tricks that make this work, and you don't see those on the videos. I'll offer one little tidbit- be mindful of the film edge. It can be razor sharp and can give you a serious paper-cut, especially with the slippery spray.lastly, the packaging box that the product is rolled up it... The top of it was mangled. There are other photos of this in other reviews. I'm guessing there was a large pallet of these that were knocked over and damaged, and could not be sold in stores. The film was slightly damaged but I just trimmed it off.
Mircea Runceanu
Reviewed in the United Arab Emirates on November 17, 2024
Not as advertised, sry
Jessica
Reviewed in Canada on November 17, 2024
Difficult to work with overall. Should be experienced and be willing to use a heat gun for installation. Once all the meddling was completed a satisfactory result was accomplished. Other products much easier to install
SALVADOR
Reviewed in the United States on November 14, 2024
Buena calidad
Paul Martel Ortega
Reviewed in Mexico on April 23, 2022
Pedi dos cajas por separado, pensando que tal vez haria un error, como primera vez instalando el producto. Que bueno, porque uno llego en pesimo estado, rayones, dos etiquetas donde alquien ya intento desenrollarlo, y parece que pisaron la caja en un punto con tenis de futbol. Mejor busca en un autozone o tienda fisica, no confias en estos vendedores, parecen productos retornados.
T
Reviewed in Canada on July 30, 2020
the film,s quality is better than my application skills . its alright to work withbut i was expecting a bit darker . creates some privacy at night , but not much duringthe day . It is also better to see through at night though . blocks sun well ,unsure of the longevity .
Arturo Fuentes
Reviewed in Mexico on April 13, 2019
Muy buenos
zack
Reviewed in the United States on May 3, 2016
Bought the basic version of 35% didn't care for it too much. Bought , this one in 35% and like it. Not only is it thicker and easier to lay down, the clarity along with durability is great. Use plenty of water/solution. Tinted my sunroof on my honda civic, works perfect. Enough to see the blue sky but not even to fade interior and heat up my car. Would buy again. Bough better tint for the rest of the car from Ebay and was precut. Lexen tint is good and llumar is better. Lexen did the rest of the car my advice, heat shrink it first. I used a blow dryer to take the curling out from it being on a roll. Use your head and do it once before you rip it off and blame the company
irishcowboy
Reviewed in the United States on June 23, 2013
I'm just another one of those guys who in this economy likes to DIY before paying someone hundreds of dollars to do it. I have never tinted anything before, I was a little nervous about messing it up but this stuff is cheap enough it won't kill me to buy another roll if I do. I was surprised how easy it was, just follow what the Gila video says and it works fine, don't be scared of the product, apply the solution generously! I ordered their application kit which works great, I can only recommend it, that way you have just what you need for the job and know it's clean.The key for this to work well is to clean the glass properly before, one crumb of dust and you have a bubble. Too little solution and you can't adjust the foil well and it creases. Stay focused, don't rush, and with some patience you'll have great looking tinted windows in under an hour depending on the size.I will gladly buy this product again if they hold up in the long run, just finished applying the foil 10 min ago so time will tell how good they really are.
Hingle McCringleberry
Reviewed in the United States on December 12, 2013
Overall a good product but they don't tell you that this single ply tint is not the color it says. When you apply the stuff you get a blue color in direct sunlight. It works well and doesn't tear to easy. But if you are looking for a true smoke color and not that cheap blue tint. Then buy your tint elsewhere.
HellsKitchenGadgets
Reviewed in the United States on November 17, 2012
I purchased this Item and it was delivered damaged badly. The outside (amazon box) was basically crushed in half. There was no packing materials inside the box at all and the tint itself was basically folded and creased in half. I put in for a return and Amazon (as usual) promptly sent a new one with a well packaged box with stuffing and all. The box that the tint comes in from the manufacturer arrived in MINT condition. I unrolled the tint and cut it for the first window. The first 8 or 10" were damaged somehow. Seems like a manufacturing issue so I discarded it. I did the first window and went to the passenger side. I unrolled the tint for the next window to find the last 3 feet was JUNK. Completely creased and folded. I don't understand how the factory can package this stuff. I ripped the tint off the first window (I don't want to drive with only ONE window tinted) and threw everything in the trash. Never again. I will use 3M from now on. I used it for 30 years with no issues. $15 lesson learned.
J.
Reviewed in the United States on December 4, 2011
First things first, if you DIY then be sure to watch some videos on the net to see the tips and tricks from the Pro's. I can't stress it enough, I fumbled through the first roll before calling my dad and haveing to go to the local car shop to get another roll. I do have to say, price was compareable to Amazon. As for installation, thats not to be complained about here... Every roll of DIY tinting is exactly the same size, and same applications. As for the product itself... This tint is the 3rd out of the normal 3 sold. There are lighter and less dark, but for the three main sold, this is the middle. Its more of a smoke than a dark smoke. Its def is not the darkest out there. For most states that make it illigal to install in the front side windows, the cops may have to think a bit about it, or go get their do-dad that measures it. As for now, this is right in between no tint and my factory tinting in the back, perfectly what I wanted. Its hard to explain, and I hope it helps.So, be sure to watch the vids. Get a squegee, or a credit card. And a bottle with a ton of water and a bit of dawn, The tools suck, but water and dawn make up for it. Seriously, you cant hurt the film, unless you dont spray BOTH sides with water Dawn mix!. Dureing the process, dont be shy, the more you use, the better it will look.This kit will do 2 side windows, thats it... maybe a small back window, but if you have a car, then get the back window kit, it comes in strips of longer material thats designed to be in the back, and in layers, not one big piece... but if you have a pickup or similar with a small window(s), this one may do the trick.Good luck!One year later (Dec of 12) There are no bubbles, no tearing from the window going up and down. I found a hair in there the other day, but thats my fault. Who have written it doesn't last must not have installed it right.
Recommended Products