Your cart is empty.
Your cart is empty.Product Description
4 Generator Sheds to chose. They are all made of independent all-around steel frame for sturdiness against rain/snow/wind, with Side Covers flip-up to run/flip-down to store feature for easy operation
Small Inverter Generator Shed
- For inverter generator up to 3,000 W.
- No assembly required, delivered as one piece.
- One piece aluminum top roof with folding handle.
- Any side cover can be opened to any height.
- Folded to flat for RV & camping transportation.
- ASIN: B09ZFDCT7Q
Premium Medium Generator Shed
- For gas generator up to 9,000 W and inverter generator up to 4500 W.
- No assembly required, delivered as one piece.
- One piece aluminum top roof with folding handle.
- Any side cover be opened at any height.
- Folded to flat for RV & camping transportation.
- ASIN: B09ZG6HXYK
Medium Generator Shed
- For gas generator up to 9,000 W and inverter generator up to 4500 W. It is an economic option to GC-2021.
- Doubled layered sloped fabric top cover.
- Any side cover be opened at any height.
- Sit on top of and move together with the generator.
- ASIN: B0C5W745PD
Large Generator Shed
- For gas generator up to 15,000 W and inverter generator up to 9000 W, including Honda EU7000iS
- 7-pieces aluminum plate top roof wrapped inside double layer top fabric cover.
- Any side cover be opened at any height.
- Sit on top of and move together with the generator.
- ASIN: B0C5W6S29J
Mobile Multi-Function Offset Hanging or Cantilever Umbrella Base Series & Mobile Cantilever Umbrella Set - All You Need In One Place For A Comfortable & Convenient Patio Time
Mobile Multi-Function Cantilever Umbrella Base
- True Mobile At Full Filled Weight
- No Water or Sand Needed as Weight
- Top Surface To Hold Cooler/Speaker
- Fit To All Umbrella With 4 Pole Holes
- Patio Stone As Filling Weight Inside
- ASIN B09Z8ZN8GB
4-In-1 Mobile Hanging Umbrella Base/Side Table/Cooler/Shelf For Speaker
- Table With Sliding Top Surface
- No Water or Sand Needed as Weight
- Detachable Cooler
- Shelf For Speaker
- Patio Stone As Filling Weight Inside
- ASIN B0C6JRGTJ8
5-In-1 Mobile 10 Ft. Cantilever Umbrella Set - Umbrella/Mobile Base/Side Table/Cooler/Shelf For Speaker
- 10 Ft. Cantilever Umbrella
- Table With Sliding Top Surface
- Detachable Cooler
- Shelf For Speaker
- Easy Move at Full Weight
- ASIN B0C6JSG3VV
stephanie adams
Reviewed in the United States on February 9, 2025
This is so perfect for our generator!! Looks nice and clean next to deck. Easy to use! Velcros on and fits nicely. My husband was going to "build " a cover" that prob would have been bulky and not as compact. Worth the money!!
teresa
Reviewed in the United States on January 18, 2025
The instructions for assembling was absolutely amazing. Very easy to assemble. Very sturdy and fit generator perfectly.
Feli K Buggs
Reviewed in the United States on September 26, 2024
Very flimsy. Not as durable for the price. Good concept
Fred
Reviewed in the United States on March 7, 2024
I've been looking for something like this for years. All the portable generator's instructions say to not use them in the rain, which is exactly the time you're most likely to need it. This addresses that problem and does it well. Although I haven't actually used it yet, I was impressed the the apparent high quality of the construction and thickness of the materials used. They also included a generous amount of hook and loop fasteners to hold it to the generator while in use. It's easy to keep the sides, where the electrical connections and switches usually are, covered, and leave the ends open for engine exhaust and air intake/cooling air.I can't speak to durability yet but it certainly looks well made. I guess that accounts for the price; you get what you pay for though.
John G
Reviewed in the United States on November 27, 2024
Shipping was very quick. Assembly is not too difficult but I had to partially disassemble to place it over the generator because the bottom rails would not fit over the handles. Once I figured that out it worked out fine and I put the bottom rail back on. The generator I have is DuroMax Hybrid XP13000. There is plenty of room under the cover for all the connections to the plug in panel and still keep the flap down. I feel this is sturdy enough and weatherproof to go through thunderstorms and ice storms.
Stealthhiker
Reviewed in the United States on November 14, 2024
While the assembly instructions could be better, the product itself is excellent. Do be careful to avoid sharp edges. Quality materials are used for the aluminum frame and cover. With lots of Velcro there are multiple configurations for use while the generator is running. Highly recommend the model with a peaked top to aid water shedding. Should work with most portable home generators.
Scott
Reviewed in the United States on October 26, 2024
This is a pretty durable design but a bit tedious to build. I got this to protect my Pulsar 9500 Watt home backup generator as it will have to run outside due to exhaust.
Chris
Reviewed in Canada on December 23, 2023
This unit has screws punched through the top of the box for the handle and the pivoting legs. These screws have no rubber washers in them, so water easily leaks through the 20 holes. Furthermore, 4 of the holes had no screws on them. Just the velcro stuck over the top. This allowed more water to just freely flow in.I am shocked at how much of a piece of garbage this is for the extortionist price they charge. Avoid at all cost. Poor construction with amateurish design.
Salvador Hernandez
Reviewed in the United States on December 12, 2023
The cover was a perfect fit on a Firman 7500 Watt Dual Fuel Generator. Good and not excessive clearance all around on the inside. About 2.5 inches clearance from the ground to give good protection from the rain, but allow you to move it easily.Tools and the bolts are a problem. The provided wrench strips the nut since the wrench fit with the nut did not seem tight enough. A better wrench is needed. You can get good tightening of you use your own socket (7mm). The bolt could also be a better quality. The provided Allen wrench seemed to strip the bolts when tightening. If the bolts are snug, the nut side only can be tightened. It would also be helpful if the parts were labeled with stickers (A, B, C, etc.).After assembly it is a good quality.
Recommended Products