Your cart is empty.
Your cart is empty.Molded PE Mixer or Equipment Case; 20" X 25" X 8"; w/ Wheels
NPat
Reviewed in the United States on September 14, 2024
Used this for an SQ6 that we wanted to travel with. Fit perfectly and while the case was thrown around, the mixer came out without a scratch.
roberta
Reviewed in Italy on February 28, 2023
Robusto ben fatto e di spessore capiente coperchio rivestito in schiuma protettiva comoda la funzione trolley.
Carola Adam
Reviewed in Germany on December 28, 2023
Ich bin sehr überrascht. Der Koffer hat zwar immer noch sein Gewicht, aber das Handling ist gut - sehr viel leichter als mein vorheriges Case. Die Kippfunktion ist eine gute Idee, aber die Rückstellung ist nicht so einfach, man klemmt sich leicht die Finger ein dabei. Die kleinen Trolly-Rollen und die Zugstange sind perfekt für den Gebrauch von Privatmenschen - für den Einsatz bei Firmen sicher nicht geeignet, aber für die private Nutzung super. Gefühlt unendlich viele Rackschrauben mitgeliefert. :)
竹中賢次
Reviewed in Japan on January 4, 2023
カタログ値のサイズとは違いましたがダメ素で注文してみて商品が届いて早速使用してみるとピッタリサイズがマッチしました。結果オーライという事です。
Steve B
Reviewed in the United Kingdom on January 12, 2023
Brand new in box, great quality, suitable for mixer or large pedalboard, wheels and telescopic handle are a bonus to make transport so easy
MandrakeVision
Reviewed in the United States on February 25, 2019
The case I received was poorly made and the advertising was misleading. I have several other products by Gator that are outstanding, but the manufacturing on this one is totally sub-par. The handles aren’t square and the canvas handle to pull the board up slipped off on the third try. Also, it is does not fit an Allen & Heath board as pitured. The rails for the the tow handle prevent the board from fitting flat with the rack in storage position. You can fold the board input panel back, but that defeats the purpose of a case like this in the first place. Works as storage, not as advertised in the photos though. Very disappointed in Gator with this one.
K & D
Reviewed in the United States on December 27, 2019
I bought this for my Allen & Heath qu-24 perfect fit. The wheels are very helpful. The extendable handle makes it easy to transport but it is not strong enough to lift the case.
Kidjo
Reviewed in the United States on June 19, 2018
I purchased the Gator 12" x 24" ATA case with wheels to use with an American Audio VMS2 controller (15.7" x 12" x 1.5"). The fit is snug – perfect for the controller – and with the included separators, there's plenty of space left for assorted cords in one or two separate adjustable compartments.The case is heavier than I thought it would be, and the only handle designated for lifting or carrying the case is on the side of the case, instead of having a second handle for lifting and carrying on the top side of the case, alongside the pull handle, like most wheeled luggage does. But all in all, not a real problem, since this thing is compact, sturdy enough, and it's got wheels!
Ryan Reeves
Reviewed in the United States on March 14, 2016
I purchased this specifically for my Line 6 Helix Foot Board. The case is almost a perfect fit. There is some wiggle room that is easily adjustable. Besides the intended equipment, the case is well made and with the rolling rack it makes my life that much easier.
Petro
Reviewed in Germany on October 19, 2016
I am a professional musician and Dj. I am extremely satisfied of quality of the case! I would like to share with you the info which instruments can be transported in this lovely case. So, the unit fits perfect to: PIONEER DDJ-SB; Novation XioSynth 25 + Native Instruments Komplete Audio 6; Boss RC-300 Loop Station; Korg padKONTROL + Akai APC mini; Behringer BCR2000 + Korg padKONTROL; Behringer BCR2000 + Akai APC mini. All of these combonations you can see on the photos below. I strongly recommend this case!
Richeetee
Reviewed in the United States on December 10, 2015
Just got this yesterday and I really like it. Nice pop up that fits my Soundcraft FX16ii, which is fairly deep with a little less than a half inch to spare (board is a little over 6" and case is just about 6.5" deep - from the rack mounts). I also previously tried the SKB pop up (SKB'19'P12 PU) but it was not deep enough - about a 1/2" shy. I left the optional wrist rest in on the bottom so the mixer fits essentially like the picture - a little space left up top (2 rack spaces) - but really no room for anything since the cables will attach in the back of the board.This case is fairly compact and light (about 17 lbs) in comparison to some other cases I looked at online (just based on the weights listed by the manufacturers) - and with a 19 lb mixer that adds up quick! The wheels and extendable handle seem pretty cool too. The extendable handle actually lends some reinforcement to the bottom side of the case too.The top is not hinged but has 2 clasps on both sides that you have to undo to take the top off. The top that came with mine had egg crate foam to protect the knobs and keep things from bouncing around inside. Mine also came with mounting screws inside - you may want to confirm before ordering as I bought it as a scratch and dent from Amazon Warehouses.May not be for everyone, but for purposes of just carting it back and forth to church every Sunday this seems like a great case that will take a beating instead of my mixer. I will update based on my real world experiences at some point.
Allen
Reviewed in the United States on September 4, 2014
THIS FITS THE BEHRINGER X32 PRODUCER!!!! I spent hours looking for a case to fit this awesome mixer. Not only does this fit it looks like it will really be handy to have it raise up. Raising it up makes it easier to read the LCD display. Also, there is an optional wrist pad at the bottom that can be left in with the X32 or removed. I am not certain yet if I will but this could be a great spot for a power conditioner or Driverack unit. This case is not a 'settle' mixer from the lack of selection, it is a great fit for this mixer.On the X32 you can put the rack ears at the top or the bottom. Since it is a mixer that does not have a flat face and rises at the top it is important that you can do this. I have mine at the top so that the bottom area with the faders sticks up. This places the bottom of the mixer chassis against the lid foam vs the top of the chassis where several tall knobs stick up. I think if you did it the reverse way you could break one of the exposed knobs. Also, doing it the way I did exposes the headphone jack at the bottom and makes it accessible. It is also possible that mounting the rack ears the other way may make the top rail of the metal rack block some of the inputs and outputs on the mixer. The weight seems good. I may add a foam block behind the mixer to further cushion it from vibration. I am also considering a rubber strip between the rack ears and the mounting channel to further isolate the mixer from vibrations.
Gary D. Demos
Reviewed in the United States on September 20, 2012
I purchased this case for my Allen & Heath 16 channel mixer (which is pretty hefty). It fits snugly on two sides and has extra room on the other. The top comes off easily if you want to just keep the mixer in the bottom half of the case. I usually don't do that to have more room for cords. I really like the luggage style pulling handle and wheels - makes it very convenient to cover some distance without having to lug a heavy mixer. The interior is decent and there are a couple extra velcro dividers in the case for whatever. Overall I'm very pleased.
Recommended Products
$24.99
$ 10 .99 $10.99