Your cart is empty.
Your cart is empty.Product Description
TIPS:
Because of Limited image capacity in amazon description.
If you need complete repair guide of ipad mini 2 lcd screen, please let me know we can send to you!
Note please:
Install the lcd screen need professional skills ,so we suggest you replace it in a professional repair store with the new lcd screen!
1.When you replace the new lcd screen, please keep the battery connector pull off.
2.When you test the new lcd screen, please keep the touch screen flex is connected with your ipad, or it will no display anything!
3.In order to protect the LCD won't scratch during shipping way, each lcd have a screen protector in surface of lcd, please remove it before install the new lcd
4.The LCD is very fragile, do not apply pressure to the corners of the lcd panel, pressure will damage the lcd panel, be gentle and cautious!
5.If The lcd no display any picture/iPad no turn on or not working properly, please just pull off battery connector and install the lcd again. sometimes, it will solve this problem,
6.If need any help with your order, we will do our best to help you!
step 1
- If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.
- Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered. This will keep glass shards contained and provide structural integrity when prying and lifting the display.
- Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.
- Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.
step 2
1.While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. 2.Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. 3.Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
step 3
- Remove the following Phillips #00 screws securing the LCD: Three 3.3 mm screws One 4.5 mm screw
- If there is tape covering any LCD screws, peel it up with tweezers.
step 4
- Remove the following Phillips #00 screws securing the LCD: Three 3.3 mm screws One 4.5 mm screw
- If there is tape covering any LCD screws, peel it up with tweezers.
step 5
- Use the flat tip of a spudger to gently lift the battery connector up off its socket on the logic board.
- Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
Gregory M Brooks
Reviewed in the United States on November 7, 2024
This item appears to be the correct part but the surface is scratched, is delaminating and has bubbles. This part is obviously used based on the it's phusical condition and after installing it was also defective.
Sally
Reviewed in the United States on November 10, 2024
Worked great
Help me
Reviewed in the United States on July 15, 2023
Easy to install and comes with everything you need to do the installation also comes with screen protector. Picture quality is great have no issues with the picture or the touch. Had to order twice though first one i received was defective but had the replacement in the next couple days.
Stephen S. Eubanks
Reviewed in the United States on June 27, 2023
Both LCDs arrived cracked and had to return them.
Twinturbo201
Reviewed in the United States on September 7, 2021
I bought the USED version of this product. The first one I ordered came in a BUBBLE ENVELOPE and was cracked from delivery... I returned it and ordered another but had amazon gift wrap it in another box and it came in great condition, installed correctly, and functions perfectly! The tools included are OK, but you will want to order a pair of larger suction cups to get the screen off and you will need a heat gun.
Gary Darnell
Reviewed in the United States on July 16, 2021
I cannot possibly express how happy I am with the service I received from this vendor, SRJTEK. First of all the product is great but most importantly, they're customer service is world class. My son cracked the digitizer on his iPad. I ordered and replaced it myself but in doing so, I cracked his LCD. I ordered this screen to replace the one I cracked. They went above and beyond to make sure I had everything that they KNEW I would need. They included event I needed to replace and install it plus new 3M 300LSE adhesive as well as a new tempered glass screen protector. Fast, on-time delivery and great customer service. What more could you ask for?
Mesoendo23
Reviewed in the United States on October 30, 2018
This is a top notch company, I had the screen for about a month and it worked great. Then out of now where, it stop working. I contacted their customer service and they were able to discover what was wrong from a video I made, they are sending me a new screen with updated software. Top notch customer service!!!
Geek Tweek
Reviewed in the United States on January 7, 2018
The media could not be loaded.
Recommended Products