S- Camera plug style

DJI ronin-s stabilizer MCC R line

1. four kinds of camera plug styles, suitable for different brands of cameras, suitable for specific models need to refer to the details page
2. Camera control cable Role - After the stabilizer is connected to the camera with this cable, the camera shooting can be directly controlled by the buttons on the stabilizer. Does not affect the stabilizer's own function
3. After using the control line, the camera can be controlled to take pictures, video functions. Detailed functions are available on DJI's website.

1：Ronin-s stabilizer was listed earlier, and it has been a long time, please update and optimize to the official latest version of firmware in time, so that it can be better compatible with your camera

2：The camera control cable connector (RSS) is located on the left side of the door panel (as shown). The plug has a differentiated direction

3:：Make sure to push the plug in place, otherwise the communication is not normal

4：The MCC cables correspond to the following camera models:

A-(MCC-Multi)for soy :

ZV-1,A5100,A6000,A6100,A6300,A6400,A6500,A6600,A7,A7M2,A7M3,A7M4,A7S.

A7SII,A7SIII,A7R,A7R2,A7R3,A7R4,A7R5,A9,

B-(MCC-Mini)for can :

EOS(6D,6D Mark II,5d Mark III,80D,800D,70D,77D,750D,650D)

C-（MCC-B)Micro usb for canon :

EOS 5d Mark IV,5DSR,EOS M50,M50 II,EOS 90D. for nk:D850,D5,D500

D-(MCC-C)

for sny :A7C,,A7R3,A7R4,A7M3,A9II,A7R5

for can: EOS R,EOS RP,R5 ,R6,1DX3,G7X3)

for nk:d780,z6,z6ii,z7,z7ii. for panic:GH5,GH5S,S1,,S1H,S5

MCC-Multi for sony cable

• MCC-Multi camera control cable
• Applicable stabilizer: DJI Ronin-s
• Camera brand models that support control:for sony :

ZV-1,A5100,A6000,A6100,A6300,A6400,A6500,A6600,A7,A7M2,A7M3,A7M4,A7S. A7SII,A7SIII,A7R,A7R2,A7R3,A7R4,A7R5,A9

Support control camera functions: take photos, start/stop recording, digital zoom, trigger autofocus.

Using the MCC-Multi cable:

1. In order to ensure that the PTZ can correctly identify the camera, after completing the cable connection, please be sure to turn on the PTZ power supply first, and then turn on the camera power supply.

2. Optical Zoom can be controlled when paired with a lens with Power Zoom function; When using with other lenses, the digital zoom function must be enabled in the camera menu to control the digital zoom, otherwise a warning message will be displayed on the camera's built-in screen when the focus wheel is turned.

3. After connecting with the MCC-Multi cable, if you need to switch to another camera/shutter control cable, be sure to restart the PGND power supply to ensure normal function.

4.Operation Procedure Description:

01)- Set the camera usb as the computer remote control --

a. Turn off the "Use Smartphone Control" camera menu. The detailed setting method is as follows: Choose: Menu > Network Use a smart phone option is off.

b. Set the "camera"; USB connection "; Function Set to "Computer Remote Control". The specific setting method is as follows:

Old menu: Set one select USB connection one select computer remote control one open.

New menu: Network 1 > Transmission/Remote 1 › Computer remote control function turned on; Or network 1 › Computer remote function is turned on (2) Plug in the cable, turn on the camera power, you can control the function

MCC-C cable

1.MCC-C camera control cable

2. Applicable stabilizer: for DJI Ronin-S

3. Support control functions: take photos, start/stop recording, trigger autofocus, electronically controlled focus

4. Support control camera brand model:

A) for sy: A7C A7R3, A7R4, A7M3, A9II, A7R5 (photo)

B)for can: EOS R,EOS RP,R5,R6,1DX3,G7X3)

C) for nk:d780,z6,z6ii,z7,z7ii

D )for pano:GH5,GH5S,S1,,S1H,S5,

E )for Fuj: X-T3,X-T4

5.The corresponding camera brand needs to pay attention to the following matters:

A>Precautions for using for sy Camera Settings " Using the Camera Control Cable (MCC-C) :

5-1). The camera focus mode must be set to Manual Focus (MF).

5-2). Turn off the Control with Smartphone function on the camera. The setting method is as follows: Select Menu Network Use Smartphone Control Select Disable.

5-3). Set the USB Connection function of the camera to Computer Remote Control. The specific setting method is as follows: Network menu "Computer remote control function" Computer remote control "open.

5-4). The 5-axis anti-shake function of the camera body will be automatically turned off. When matched with the anti-shake function of the lens, the anti-shake function is not affected after the lens anti-shake function is turned on.

MCC-C cable (Setting Notes)

5-5). When using the electronic focus function, if the lens has two modes of AF and MF, please set it to AF mode, otherwise the electronic focus function cannot be used.

B> for Can camera use Settings note >

1. Due to the camera system, if you need to take pictures, please switch the camera shooting mode to take pictures; If you want to record, switch the camera mode to video.

C>for nk camera use Settings note>

Note: Turn on the camera real-time view function, switch the lens focus mode to A, and set the internal focus mode to AF-S/AF-C to use the electronic focus function

D> Matsushita/GH camera use Settings note >

1. Set the USB mode of the camera to PC (Tether) mode or select PC (Tether) mode in the displayed dialog box when the camera is powered on.

2. Switch the focus mode switch on the camera body to MF (manual focus), you can use the electronically controlled focus function

3. Switch the focus mode switch on the camera body to AFS/AFF/AFC, and you can trigger the automatic focus of the camera through the camera control button on the PTZ

E>for Fui Camera Settings Precautions>

1. Set PC Connection Mode of the camera to USB Auto Mode. The specific setting method is as follows: Select menu → Settings → Connection Settings →PC connection mode →USB auto mode.

2. The button function of the camera body is not supported during connection. If you need to use the button function of the camera body, disconnect the camera control cable or set the head to sleep. To switch between recording mode and photographing mode of the camera, restart the camera or set the PTZ to sleep mode

mcc-mini usb cable

MCC-Mini camera control cable

Applicable stabilizer: DJI Ronin-s

Camera brand models that support control: for canon -EOS(6D,6D Mark II,5d Mark III,80D,800D,70D,77D,750D,650D)

Support control camera functions: take photos, start/stop recording, Canon Settings Note

1. Due to the camera system, if you need to take pictures, please switch the camera shooting mode to take pictures; If you want to record, switch the camera mode to video.

MCC-B (micro usb) cable

1. MCC-B camera control cable

2.Applicable stabilizer: for DJI Ronin-s

3.Camera brand models that support control:

A)for can :EOS 5d Mark IV,5DSR,EOS M50,M50 II,EOS 90D.

B)for nk:D850,D5,D500

4.Support control camera functions: take photos, start/stop recording

5. Notes

1.) if you need to take pictures, please switch the camera shooting mode to take pictures; If you want to record, switch the camera mode to video.

2.)of D850,D5, 5D4,5DS R,1DX3 cameras Because the USB ports are large ports, they are divided into upper and lower two small ports. So just plug it into the socket below and use the controls

6.If you don't communicate after connecting, update your stabilizer firmware version to the latest