Your cart is empty.
Your cart is empty.Product Description
Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.
From the Manufacturer
The Fluke TL224 SureGrip Silicone insulated test leads provides the convenience of attaching clips, hooks and grabbers, as needed. The leads are 60-Inch (1.5 m) long, offer reinforced strain relief, and include banana jack terminations that allow a great variety of test lead configurations. The DMM test leads are one pair (red, black) of silicone insulated leads with a safety shroud and a right angle connector on one end and a straight connector on the other. The set has a 600 V CAT IV, 1000 V CAT III, 10 A rating and are UL listed. SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. The Fluke TL224 SureGrip Silicone Insulated Test Leads are sold as one set per package. Expand your testing capability or update your tools with test lead sets and kits. Designed for industrial, electrical, and electronic needs, the collections range from starter to master test lead selections. Because they are an integral part of the complete measurement system, worn or under-rated test leads can cause inaccurate readings and pose a serious shock or electrocution hazard if live wires are read as being de-energized. To avoid these risks, use the correct test probe for the application. Test leads are replaced on average every 18 months.
Dan
Reviewed in the United States on September 16, 2024
I'm a tool fanatic but not a snob, I don't spend more than necessary for a good quality tool; therefore I don't have to have THE name brand but here I do. There are no better test leads than these. I use mine multiple times every day, I use them so much I've worn out one pair.Trust me, these are the ones you want/need. You shouldn't have to buy another set.And they fit any test multimeter I've come across. There might be some that don't but I wouldn't hesitate to buy them.
Customer
Reviewed in the United States on September 1, 2024
Excellent product.
Roger Estes
Reviewed in the United States on August 21, 2024
The work as designed
Joe
Reviewed in the United States on May 18, 2024
Can’t go wrong with Fluke leads. My preferred lead on any meter. Have these to keep with me to use on meters that are not my own. Never trust the care someone else puts into their leads. Bring your own.
gaston
Reviewed in Canada on December 20, 2024
fonctionne très bien
MB
Reviewed in the United States on December 15, 2024
Quality product & well made. Silicone wires, good connectors, & I have had no issues w/ product. Would buy again !
Richard Frank
Reviewed in the United States on September 15, 2023
Fluke leads aren't nearly as flexible as they were when I purchased them years ago.My previous leads would roll up and just stay in the compartment of my meter case and now they keep wanting to unravel making it difficult to put things away.Still a great lead but it's not the product it once was.
FRANK
Reviewed in Canada on August 1, 2023
pieces d origine fluke
Mr. Martin Offer
Reviewed in Canada on November 2, 2023
If you are going to buy a set of leads for your meter, buy these. Its as simple as that
Enginerd
Reviewed in the United States on January 24, 2023
My 20+ year old Fluke 79's test leads finally gave out so needed some new leads. I won't use any leads except silicone insulated because PVC insulation is worthless in cold weather. These are perfect for pairing with a variety of test probes and clips. Do note that these leads do not come with the test probes, they are just the leads (wires) only. They obviously work perfectly with my Fluke meter and Fluke test probes, but they work just as well with my other non-Fluke branded meters and probes. I highly recommend theses test leads.
Mark
Reviewed in Canada on January 24, 2023
These are high quality silicone leads. Yes they are expensive but they stay soft and flexible down into the negative double digits unlike the stiff and brittle leads that come with the cheaper fluke meters, and they are LONG! I bought these for my Fluke 107 and it’s a definite upgrade! Love the banana plugs on both ends as the amount of accessories you can use with them is amazing. Back probes, alligator clips, you name it!
Zack
Reviewed in Canada on December 30, 2022
Pretty expensive but well worth the money if you use your multimeter every week.
N/A
Reviewed in the United States on December 7, 2011
Ever since I bought Fluke's Sure Grip Alligator Clips (made in USA and sold here) I wanted to purchase Fluke's TL224 SureGrip Silicone Test Leads. These are probably the best test leads I've used and they feel even more durable/comfortable than my Klein MM200 test leads that came with the meter. What really got me excited about these test leads is the fact these test leads are also made in USA, similar to the alligator clips.However, although I really like fact these are made in USA, the fact that these tests leads have CAT IV protection and conform to safety standards IEC 61010-2-031:2002 but also comply to EN standards EN A1:2008. I am a big advocate in safety and even though these Fluke leads have dual rated CAT IV protection and CAT III protection, strict compliance to IEC/EN standards is a must.However, besides being able to use Fluke's alligator clips (AC285) these leads are also entirely compatible with Fluke's TP220 industrial test probes. This is a giant plus and those probes are most certainly a nice addition to any Fluke test lead.I also like the that the wire is flexible and also simonized-insulated. Because of that, these leads have superb resistance to both cold and heat. These leads can withstand -20 to 55 degrees in Celsius, can withstand a humidity percentage between 0 and 95%, which is 0 to 35 degrees in Celsius, and last, but certainly not least, can endure an Altitude of 2000 m.In addition, the test leads are also reinforced to provide maximum strain relief. This is exceptionally helpful if your in a extremely tight situation or where that even level of comfort would certainly provide a cushion for when your hands might become tired.I had forgotten to mention this earlier but this entire product is CE, SA and UL listed. Knowing this information is giant relief to me, as some test leads only have Intertek protection, if even that sometimes. More protection is always a plus and is worth having, especially UL listed.Now another plus to these leads, they are fused. So even if your meter isn't fused, these leads will provide that level of protection, so your not only protecting yourself, but also your multimeter as well. However, it's crucial to remember these test leads have a maximum current of 10 Amps and at no time, should that ever be exceeded.It's hard to tell in the picture but the length of this product is 1.5 meters and these do fit standard 4mm banana connectors. In addition, these also have pollution degree of 2 as well. Plus they are double insulated as well.Overall, these are exceptional test leads. They may be simple, but they truly are well built and designed and will likely last a very long time. If your looking for a test lead that will provide not only CAT IV protection, but will provide great service, these are the one's to buy.
Recommended Products
$139.98
$ 57 .99 $57.99