Your cart is empty.
Your cart is empty.4.4 out of 5 stars
Product Description
PP Flame Retardant Material
Made of PP material, shockproof and drop-resistant.
Double impact protection for greater safety.
204 Stainless Steel Spring
Stainless steel spring material, anti-oxidation and better for battery connection.
Excellent Production Process
Long Product Life: Battery replacement will not damage parts.
AA Battery Packs
The package includes 3 PCS of AA battery packs and 6 LED light cables. The bulb diameter is 3 mm, and the length of light wire is about 11.8 inches.
Dylan
Reviewed in the United States on August 20, 2024
Each battery pack takes 2 AAA batteries (not 3 like the description photo says) and outputs 3 volts total. White LEDs like this have a forward voltage of at least 3 volts. What this means here is you CANNOT wire these in series on a single pack, as in daisy-chaining one after the other, since there will not be enough voltage after the first LED. The LEDs would look super dim or not produce light at all.Unless you use a larger power source, you MUST wire to each pack in parallel, meaning all off-white wires to red and all white wires to black. Yes, it is hard to tell which is white versus off-white, but there is a difference (known as 'polarity') and you cannot just guess. You can wire all six LEDs to a single pack if you like, they'll be just as bright but the batteries will drain faster. No resistors are necessary since each LED will consume >3 volts in parallel.You may have noticed another kit by this seller. The only difference (besides price) is the other kit has battery covers with screws, whereas the covers in this kit slide off with light pressure. The packs' 6 volts are not enough to cause injury by touch, so which kit you get is a matter of preference. Once you're done, make sure to cover your wire connections with tape so they don't cross. Good luck!
Dylan
Reviewed in the United States on August 20, 2024
Each battery pack takes 2 AAA batteries (not 3 like the description photo says) and outputs 3 volts total. White LEDs like this have a forward voltage of at least 3 volts. What this means here is you CANNOT wire these in series on a single pack, as in daisy-chaining one after the other, since there will not be enough voltage after the first LED. The LEDs would look super dim or not produce light at all.Unless you use a larger power source, you MUST wire to each pack in parallel, meaning all off-white wires to red and all white wires to black. Yes, it is hard to tell which is white versus off-white, but there is a difference (known as 'polarity') and you cannot just guess. You can wire all six LEDs to a single pack if you like, they'll be just as bright but the batteries will drain faster. No resistors are necessary since each LED will consume >3 volts in parallel.You may have noticed another kit by this seller. The only difference (besides price) is the other kit has battery covers with screws, whereas the covers in this kit slide off with light pressure. The packs' 6 volts are not enough to cause injury by touch, so which kit you get is a matter of preference. Once you're done, make sure to cover your wire connections with tape so they don't cross. Good luck!
rossc.lorrey
Reviewed in the United States on August 19, 2024
They were miniature lights and I wanted to use them on a building that I was making and none of the lights work and there is current coming out of the battery box
rossc.lorrey
Reviewed in the United States on August 19, 2024
They were miniature lights and I wanted to use them on a building that I was making and none of the lights work and there is current coming out of the battery box
Snowball
Reviewed in the United States on March 22, 2024
This is my review of Flever’s Miniature LED lights.This is my second set of these lights, and they are used to illuminate small bookshelf dioramas I build.You get three battery packs that require two AA batteries each (not included) and 6 LED lights with 12-inch (30cm) cables. The battery packs have red/black cables with a length of 6.5 inches (16.5cm).These lights are quite bright, and I have had no problems with any of them. In one diorama I built, I wired all six lights into a single battery pack, and they worked fine.The battery packs do not work with a remote control or a timer. They have a simple on/off switch, and when turned on will stay on until the batteries extinguish, or you turn them off.I find them to be of excellent quality, and will be ordering more in the future.
Snowball
Reviewed in the United States on March 22, 2024
This is my review of Flever’s Miniature LED lights.This is my second set of these lights, and they are used to illuminate small bookshelf dioramas I build.You get three battery packs that require two AA batteries each (not included) and 6 LED lights with 12-inch (30cm) cables. The battery packs have red/black cables with a length of 6.5 inches (16.5cm).These lights are quite bright, and I have had no problems with any of them. In one diorama I built, I wired all six lights into a single battery pack, and they worked fine.The battery packs do not work with a remote control or a timer. They have a simple on/off switch, and when turned on will stay on until the batteries extinguish, or you turn them off.I find them to be of excellent quality, and will be ordering more in the future.
TBZ
Reviewed in Australia on February 6, 2024
The Flever DIY House Accessory for Dollhouse Miniature, featuring 3 AA battery packs with 6 LED lights, is a charming and functional addition to our miniature setup. While it does deliver on its promise of illuminating our dollhouse with a warm and inviting glow, there are a few important considerations to keep in mind before diving into assembly.First and foremost, the LED lights included in this set work as advertised, casting a delightful ambiance that brings your miniature world to life. Whether you're creating a cozy living room scene or a twinkling bedroom retreat, these lights add a touch of realism and charm that is sure to impress and make our childs eyes sparkle.However, it's worth noting that the assembly process may require a bit of extra attention to detail. As mentioned in other reviews, the lack of clear markings indicating the positive and negative terminals on the cables can lead to confusion during setup. Without proper guidance, there's a risk of inadvertently connecting the wrong cables to the battery pack, potentially causing frustration and delays in the assembly process.That being said, with a little patience and careful examination, it's entirely manageable to navigate this minor hiccup. Taking the time to double-check the orientation of the cables before soldering or connecting them to the battery pack can help prevent any mishaps and ensure a smooth assembly experience.Once properly installed, the accessory truly shines, adding a captivating glow to your dollhouse scenes that enhances the overall ambiance and realism. Whether you're an experienced miniature enthusiast or a novice looking to add a special touch to your creations, these LED lights offer a simple yet effective solution for bringing your miniature world to life.
TBZ
Reviewed in Australia on February 6, 2024
The Flever DIY House Accessory for Dollhouse Miniature, featuring 3 AA battery packs with 6 LED lights, is a charming and functional addition to our miniature setup. While it does deliver on its promise of illuminating our dollhouse with a warm and inviting glow, there are a few important considerations to keep in mind before diving into assembly.First and foremost, the LED lights included in this set work as advertised, casting a delightful ambiance that brings your miniature world to life. Whether you're creating a cozy living room scene or a twinkling bedroom retreat, these lights add a touch of realism and charm that is sure to impress and make our childs eyes sparkle.However, it's worth noting that the assembly process may require a bit of extra attention to detail. As mentioned in other reviews, the lack of clear markings indicating the positive and negative terminals on the cables can lead to confusion during setup. Without proper guidance, there's a risk of inadvertently connecting the wrong cables to the battery pack, potentially causing frustration and delays in the assembly process.That being said, with a little patience and careful examination, it's entirely manageable to navigate this minor hiccup. Taking the time to double-check the orientation of the cables before soldering or connecting them to the battery pack can help prevent any mishaps and ensure a smooth assembly experience.Once properly installed, the accessory truly shines, adding a captivating glow to your dollhouse scenes that enhances the overall ambiance and realism. Whether you're an experienced miniature enthusiast or a novice looking to add a special touch to your creations, these LED lights offer a simple yet effective solution for bringing your miniature world to life.
BTS
Reviewed in the United States on December 30, 2024
A little tricky to wire together. It would help if the light wires were color coded. They are rather bright, too bright for a village, but I coated the bulbs with darker glass stain, and it took some of that away.I have to say, the thrill of seeing my village house lit inside for the first time was worth the anxiety of wiring them.
BTS
Reviewed in the United States on December 30, 2024
A little tricky to wire together. It would help if the light wires were color coded. They are rather bright, too bright for a village, but I coated the bulbs with darker glass stain, and it took some of that away.I have to say, the thrill of seeing my village house lit inside for the first time was worth the anxiety of wiring them.
Liz
Reviewed in the United States on November 28, 2024
Exactly what i was needing. Perfect for dollhouses or booknooks. Bright but not too bright. Sturdy like what comes with the book nooks. Super cute and best bang for your buck.
Liz
Reviewed in the United States on November 28, 2024
Exactly what i was needing. Perfect for dollhouses or booknooks. Bright but not too bright. Sturdy like what comes with the book nooks. Super cute and best bang for your buck.
Customer
Reviewed in the United States on November 24, 2024
So we were building a 4 story doll house and wanted lights. To simplify things we wired 4 lights into one battery pack. This required ordering more 32 ga wire (also available from Amazon) and wiring things in parallel. Worked great! When wiring may need to twist, solder and crimp to ensure good connection.
Customer
Reviewed in the United States on November 24, 2024
So we were building a 4 story doll house and wanted lights. To simplify things we wired 4 lights into one battery pack. This required ordering more 32 ga wire (also available from Amazon) and wiring things in parallel. Worked great! When wiring may need to twist, solder and crimp to ensure good connection.
lynn sweeney
Reviewed in the United States on October 22, 2024
They work great for my room boxes.
lynn sweeney
Reviewed in the United States on October 22, 2024
They work great for my room boxes.
Customer
Reviewed in the United Kingdom on October 19, 2024
Very handy for the lights in my dolls house
Customer
Reviewed in the United Kingdom on October 19, 2024
Very handy for the lights in my dolls house
Richard Cole
Reviewed in Mexico on February 26, 2023
Se requiere ensamblaje y se requieren baterías.
Richard Cole
Reviewed in Mexico on February 26, 2023
Se requiere ensamblaje y se requieren baterías.
CNX of NYC
Reviewed in the United States on December 27, 2023
These work perfectly for my 1:12 scale dollhouse! The areas I needed them in: lamps and overhanging lighting... so amazing so far. Just what I needed to the addition. This set comes with 3 battery boxes, each to hold (not included) 2 AA batteries, and 6 each of the bulbs. The light is a warm-white. These may be a little bright and shaped too wide for 1:12 scale chandeliers.... for that, I would use lower wattage LEDs... But what a gorgeous affect. All needs are relative but as a miniaturist, these worked great. Nice and bright! All worked perfectly well with no issues. I'd definitely recommend.
CNX of NYC
Reviewed in the United States on December 27, 2023
These work perfectly for my 1:12 scale dollhouse! The areas I needed them in: lamps and overhanging lighting... so amazing so far. Just what I needed to the addition. This set comes with 3 battery boxes, each to hold (not included) 2 AA batteries, and 6 each of the bulbs. The light is a warm-white. These may be a little bright and shaped too wide for 1:12 scale chandeliers.... for that, I would use lower wattage LEDs... But what a gorgeous affect. All needs are relative but as a miniaturist, these worked great. Nice and bright! All worked perfectly well with no issues. I'd definitely recommend.
Recommended Products
$249.95
$ 99 .00 $99.00