Your cart is empty.
Your cart is empty.Product Description
DIMEANI fit for JEEP Gladiator Bed Rails
- Replace: 82215956
- Compatible with: 2020 2021 2022 2023 2024 Jeep Gladiator
- Sturdy: Made of stainless steel, Max recommended load is 250 lbs per rails
- Contain: 3* bed cargo rail, 6* tie down bed cleat, 16* screw, 2* M6 bolt, 1* instruction
- OEM Design: Although this is not the Genuine OEM, the quality meets or exceeds the OEM standard
S. Katz
Reviewed in the United States on January 2, 2025
Materials seem to be of high quality, but I did have a few issues that resulted in the install taking twice as long as it should have.The biggest issue I had was with the end bracket that attaches to the back of the bed. With the bend as delivered in picture 1 the rail is pushed far too forward for any of the holes to line up. With a little hammering I bent the bracket forward (detached from rail 1sr!) as seen in picture 2. After securing the 4 bolts that attach the rail to the side I then was able to draw the end bracket into position with the 5th screw.I did have one hole in one rail that didn’t line up properly (picture 3). I don’t know if this was the hole in the bed (drivers side, most forward) being off or the hole in the bracket being off. I ended up enlarging the hole with a dremel tool to resolve. If holes in the rail were slightly oval in shape any inconsistencies could have been avoided.One last problem I had was that on my factory sprayed bed liner some of the holes were blocked and some of the threads were clogged. This was not a problem with this item, but the instructions could call out to retap (M6) all the threads in the bed before trying to install the rails, or at the very least screw all the bolts first to make sure they screw in properly.
Liz
Reviewed in the United States on July 9, 2024
These rails were very well made, fit perfectly, and we're fairly easy to install... I have already used the rails for my bed cover, and the tie downs in the cargo bed... I highly recommend this system...
John E.
Reviewed in the United States on June 16, 2024
These rails came impeccably packed with all the hardware necessary for the install. Directions are basic at best. It comes with foam pad strips that are not defined in the instructions but I placed them on the inside (between rail and bed) near the bolts. As mentioned in other reviews, the holes don’t line up on the side rails. If you forgo the end bolts (against the tailgate area) then everything lines up nicely. If you use the end bolts, it’s going to be a struggle. They did not account for the very small additional spacing the nut creates and therefore throws the whole rail out of alignment. Now if you’re just carrying small items and not trying to tie down an huge object in the bed, the four bolts along the rail will do just fine. I’m slightly disappointed in the engineering, but not enough to return it. It looks great, feels strong and adds great cargo security. Just want buyers to know what they’re getting into. Good product and very happy with final product.
Mumbo
Reviewed in the United States on March 23, 2024
I'm overall happy with these.The front clamps dont fit on my 2023 Jeep Gladiator Hard Folding Tonneau Cover, so you can either not install the front rail or diy new front clamps.As with most Chinese products, the instructions take close examination before attempting the install. Still, it only took be about 1/2 hour to install all three rails.It includes 6 tie downs, some rail kits (including Mopar) only include two.1. The instructions indicate FWD as being toward the cab in one diagram (2), and towards the gate in another (3). Funny enough, these instructions appear to be copies of the Mopar instructions (which had the FWD pointing in the correct direction.2. I wasn't clear to me that the tie downs slip into and out of the notched sections at the ends of the of the rail.3. Would have liked better bolts. These use spline with a small 'L' shaped driver. It will take you hours to install using this tool. You'll need a ratchet handle and a spline socket.
Jurron
Reviewed in the United States on November 13, 2024
Products like this really highlight the importance of reading reviews before purchasing. Be prepared to either skip hardware, or make new holes in your vehicle. As mentioned in other reviews, the holes do not line up at all. It always amazes me when things like this make it all the way to the consumer. It is a sturdy rail though.
MH48
Reviewed in the United States on November 11, 2024
Not fully painted, not stainless steel. Rust spots showing up one week after install.Product has flaws similar to what is read on other reviews. Inside of rails not fully painted. Holes do not line up well at all with stock vehicle. Very difficult install due to this and not able to complete all bolts.Attempts to contact seller have failed.
Jason
Reviewed in the United States on October 24, 2024
Looks great at a great price. HOWEVER the installation could have been better. I have a 2024 Jeep Gladiator Mojave X with the factory sprayed bed liner so I took the time to clean and tap my holes (M6 x 1.0). When the product arrived the head rail installed perfect. Then I installed the passenger side rail. The holes were just a touch off but it still installed well. The driverside rail was a pain. None of the holes lined up. The L-bracket screw snapped. I had to drill it out and re-tap the hole. I ended up taking the L-bracket off and flipping the rail around. By doing this the holes lined up better but not with the L-bracket attached. If they would just make the mounting holes on the rails like those on a TV mount this wouldn’t be a problem. It does look good and is solid. Buyers beware of potential issues.
Customer
Reviewed in the United States on October 12, 2023
I never take time to write reviews. This item far exceeded my expectations in fit, finish and high quality. Even the box the rails came in is high quality, directions are detailed and with color pictures. The tools required for installation are included, the tools are not cheap stamped sheet metal, quality tools I placed in my tool box. The tools will be useful for years.
Recommended Products
$272.95
$ 99 .00 $99.00