Your cart is empty.
Your cart is empty.From the Manufacturer
The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Clamping thickness 6 5/8 inches (168mm). Includes 1 clamp.
Chris
Reviewed in the United States on February 12, 2025
When you need precision, the Festool 491594 Quick Clamp turns heads. This robust clamping tool excels at securing workpieces for cutting, sanding, or routing. After extensive use, I can confidently say it offers unmatched versatility in any workshop.One standout feature is its impressive clamping thickness of 6 5/8 inches (168mm). This generous capacity accommodates various workpieces effortlessly. Whether you’re working on a thick wood slab or a delicate veneer, this clamp adjusts to meet those needs.Another advantage lies in its ratcheting mechanism, which ensures easy locking and quick release. I found this incredibly helpful during lengthy projects where switching between tasks can slow you down. Instead of fumbling with stubborn clamps, I could swiftly change setups, enhancing overall efficiency.Integration with the MFT table is seamless. It locks into the holes and channels without a hitch. I appreciated this feature during my recent furniture project. Utilizing the MFT table alongside the clamp provided a reliable platform for precise cuts while keeping everything stable.Using the clamp with guide rails greatly expands its versatility. The ability to insert it into the bottom t-slot of guide rails permits limitless positioning, a game-changer for complex angles or curves. I enjoyed working with different setups, achieving angles I previously found challenging with standard clamps.Compatibility is another strong suit of the Festool 491594. It works seamlessly with a variety of Festool machines, including KAPEX KS 120, MFT/3, TS 55, TSC 55, and TS 75. For anyone deeply invested in the Festool ecosystem, this clamp is a perfect addition.While the clamp performs well, adjustments may take a bit longer for some users. It requires a learning curve to fully understand its best use cases. With practice, you’ll find that the clamp delivers consistent quality and reliability.The durability of the construction stands out, too. Materials feel sturdy and can withstand rigorous shop environments. Having used similar clamps, many have plastic components that break over time. However, Festool’s choice of robust materials ensures long-lasting performance.What I love most about this tool is its ability to enhance workflow without interruptions. Switching from one project to another, I enjoyed the consistent clamp performance. It has made every job go smoother and with less fuss.
Adam M.
Reviewed in the United States on September 10, 2024
I’m very satisfied with the purchase. Great durable clamp. Just what I needed.
ArmYourselves
Reviewed in the United States on August 7, 2024
Solid clamps, good packaging, came in great condition. But really expensive
Customer
Reviewed in the United States on March 28, 2024
These are expensive. Like all things with the Festool name on them, they cost more than you think they should.In the case of these clamps, it’s worth it. Why? Because they are 100% made of freaking metal, that’s why!!I had never seen these in person prior to buying them and was thrilled at the construction quality when they showed up. Head and shoulders above most of the other crap you can buy that’s plastic, flexy and crack prone. I will never have to replace these, but if someone stole them, I would buy them again.
billy
Reviewed in France on December 13, 2024
Grande qualité de produit facile à manipuler
Bernhard Zehetner
Reviewed in Germany on January 6, 2024
Was soll man dazu gross sagen, Festool ist zwar nicht die günstigste Marke aber man erhält dafür echt gute Qualität. Das Material fühlt sich hochwertig an, kein billiger Kunststoff, liegt gut in der Hand und die Bedienung ist auch einwandfrei.Wer also vernünftige Zwingen haben will sollte sich diese nehmen.Wenn man sie schon mal getestet hat will man auch keine anderen mehr.
Hannah
Reviewed in the United States on April 15, 2024
5 stars due to typical Festool design excellence. Glad I bought, no regrets. BUT, the cheaper brands, though a tad more challenging to use, might be good enough. I’m happy with this pair, but I doubt I’ll buy more. I’m using these for holding the saw track in place. For bench holding applications, the “lesser” clamps are sufficient. But for the track, THIS is the one!
Wild Bill
Reviewed in the United States on August 7, 2023
Bought a pair of these for my Festool track saw and they are a perfect addition. Easy to operate and hold strong. I have yet to be disappointed in anything purchased from Festool . More expensive, yes but consider the cost if their products were made here in the US with the same quality. I don’t mind paying for quality. I don’t find it in products from China.
Dave Libertyville
Reviewed in the United States on December 16, 2023
Hemmed & hawed a lot over this - do I really want to sink so much money in to a clamp. Happy I did it - this thing REALLY applies clamping force. It's like anything else Festool makes - it's extremely good, and extremely expensive. You can always find something 80% as good for 40% less, but I don't regret buying this. You clamp something with this thing, and it ain't moving.
david lewis
Reviewed in Australia on June 26, 2022
I clamp everything with these , amazing clamps
pass
Reviewed in the United Kingdom on July 9, 2020
Listen...I know I’m a Festool Freak who absolutely loves anything Festool...but this here Lever Clamp, which I think is even originally designed and made by Bessey, is ....the 💣!!!!Yes, it’s a whole lotta dough to fork out for a measly single clamp , but once you use this... I tell ya , u won’t wanna go back to standard twist for half an hour to tighten clamps,AND you’ll be orderin another few of these and forgetting about how much money is left in that savings account😜🤦🏽♀️...Seriously these dudes are worth their weight in gold,and then some...They work in a lot of tight and narrow areas that regular clamps just don’t fit in(including Festool Tracks and many other Tracks by other companies)they’re small and compact, they are very ruggedly designed for real tough every day use, they look suuuuper cool, and best of all, they are literally a snap to use.You pull em back ,set the bottom hard alloy part under the object to be clamped, lower the top part to the object, then tighten by pushing the lever towards the rod thing...wham you’re clamped and good to go!!The green lil button releases, and they are strong enough to hold many things with just a single clamp instead of the usual minimal two....excellent!!! Thank you Festool and Bessey for this green/red stroke of pure clamping genius!!!!!🙏🏼👌🏿👍🏿❤️🌕🐚✨❄️😘❤️🌹
Jorge Cano
Reviewed in Mexico on January 13, 2020
La prensa es de lo mejor estoy muy satisfecho con la compra nada más quiero saber porque nada más me pueden enviar uno. Gracias
Terrence Walsh
Reviewed in the United States on March 7, 2016
For the last year I compared six Festool Quick Clamps to other clamps on my clamp cart. Here's the short answer:THE FESTOOL CLAMPS ARE NEVER ON THE CLAMP CART. THEY ARE ALWAYS ON MY WORKBENCH. I saw Ron Paulk using these clamps with his amazing workbench. I don't have his great setup but thought I would try one clamp. Soon after I bought five more. They feel pricey compared to Besseys and others. But the Festools just get more done, fast. They have good grip, good articulation, and superior clamp pressure. My "workshop" is outside on my deck. Key word: outside. No matter how I protect them my tools take a beating from Virginia weather. It's inevitable. Now look at how these Festool clamps weathered. They were outside 24/7 for more than a year. They were protected from most rain and snow only by a tarp over my workbench. They were used every week. You can see from the pics that they look like new (except for the glue). They ignored the weather like a duck ignores rain.These Festool clamps are workhorses that never complain. Love them.
Recommended Products
