Shopping Cart

Your cart is empty.

Your cart is empty.

Festool 488715 DX 93 Replacement StickFix Sanding Pad, Soft,

Free shipping on orders over $29.99

$23.97

$ 10 .99 $10.99

In Stock
  • Soft pad for consistent sanding results over your entire surface, including corners and hard to reach areas
  • Triangular sanding pad features equal-angle corners for full use of all three abrasive corners, and convex edges for sanding against edges
  • StickFix hook and loop design for quick and efficient abrasive changes; enables re-use of partially used abrasives
  • Integrated dust extraction - Pads are designed to efficiently channel dust through the rear port, resulting in cleaner air and longer pad and abrasive
  • Center snap fastener enables quick rotation of pad, allowing you to get the most out of your pads and abrasives.


From the Manufacturer

Standard replacement soft sanding pad for sanding in tight spaces with the DX 93 detail sander. Complete with snap stud for quick changes. The secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are designed with dust extraction as a primary consideration, so you'll work cleaner, produce a better finish and significantly extend the life of your abrasives and pads. Festool pads feature the StickFix hook and loop design for quick and efficient abrasive changes, and enable re-use of partially used abrasives. A highly-resilient, heat-resistant MPE foam is utilized in all our pads for consistent finishing results, uniform wearing, and extended pad life. Because sanding pads will eventually fatigue and require replacement, it is advisable to keep a fresh pad at hand to avoid a break in work. Includes 2 sanding pad. Made in Germany.


DF
Reviewed in the United Kingdom on January 25, 2025
It's Festool, so top quality and function. Yes, expensive, but they do the job better than any competition.
someone in the audience
Reviewed in the United States on August 13, 2024
Complicated place needed sanding. The edge of the original pad got chewed up. Hook and loop made it easy to replace.
Kunde
Reviewed in Germany on July 16, 2024
Alles gut , passt!
.
Reviewed in the United Kingdom on June 14, 2024
Backing pads for the RO90 496802 sanding attachment. They work well and are durable. The pad can be rotated when the tips wear. To avoid this let the tool do the work, as too much pressure can damage the hook and loop surface. It almost goes without saying that Festool are expensive; hence four stars.
Ulf Schröter
Reviewed in Germany on October 20, 2024
Nicht ganz günstig, aber schont den viel teureren Schleifschuh der RO90. Da man mit Dreieckschuh primär in Ecken punktförmig belastet, kommt es hier zu einer Abnutzung gerade der Pad-Spitzen. Durch Drehen der Pads hat man davon 3 je Pad, mit den 2 enthaltenen Pads ergo 6 Ecken zum "verheizen". Für mich daher in Punkto Preis-Leistung ok, ist halt wie Schleifpapier letztendlich auch Verbrauchsmaterial (halten aber deutlich länger).
ESNAULT
Reviewed in France on October 10, 2022
Article de remplacement identique à l'original
A.I.
Reviewed in the United States on August 4, 2018
Wear of velcro plate in the corner is a problem of all triangular-shaped sanders. You press too hard, wear out your sheet of sanding paper, and velcro on the pad goes next. Festool came up with a quite ingenious idea to attach velcro pad to the plate also on velcro, so that it can be easily removed, turned 120 degrees to use each of 3 corners, or even flipped upside down to use the other 3 corners on the other side. It is super easy to remove from the plate and re-attach. This $25 package contains two soft triangular pads.These StickFix pads come in two versions, soft (the same that comes with the tool) and hard. Soft, obviously, works better on not perfectly flat surfaces in cases when it is not critical if the surface is very flat. Hard pad is preferred when flatness is desired and important.Everything Festool is usually very expensive, but this part is an exception in all respects as it better designed, and it comes much cheaper per replacement corner than any other brand I know. The price actually comes down to about two dollars per corner of the pad. For most sanders, where the corner can be replaced, it starts from $5 plus shipping (I remember replacing one on Black and Decker sander), and if cannot be replaced separately, the whole plate can be $20+.
Werty
Reviewed in the United States on October 5, 2017
I wish these would last longer than they do. I had to work in very tight corners on beams overhead, and to get the corners you had to tilt the tool to only use the corners if you wanted to remove any materials. This wore down the corners very quickly. It is very smart that there are 6 corners per pad, but man are they expensive.
Dogparty
Reviewed in the United States on September 29, 2016
Festool product. works very well, but pricy
Auburn Tiger
Reviewed in the United States on June 14, 2015
There are two pads per package so the price is better than anticipated. Quick ship and delivery!
Recommended Products

$6.99

$ 2 .99 $2.99

5.0
Select Option

$50.00

$ 21 .99 $21.99

4.8
Select Option

$8.28

$ 3 .99 $3.99

4.3
Select Option