Your cart is empty.
Your cart is empty.Product Description
Product Information
- Product name: 803-0006
- Size: Cruise/Custom/Touring
- Product model: Motorcycle Cover
- Product Material: 420D Oxford Cloth
- Product function: Waterproof / UV protection / Windbreaker
- Features: Suitable for all weather / Consists of 3 layers of fabric / Water pressure 10000MM/ Exhaust pipe burn prevention treatment / All seams are treated with double needles and waterproof beads / Soft inner fabric Protects the body / Has a circulating ventilation system throughout the body / Equipped with three windproof buckles / Front and back drawstrings / anti-theft lock hole / Stores cover Bag
Real Test:Motorcycle Cover-Exhaust pipe heat Shield
We uniformly use the same type of windproof lighter to test 3 products.
Simulate the temperature of the scheduling Exhaust pipe after the real motorcycle has been used.
Facts have proved that the anti-scalding settings of most motorcycle covers on the market fail our test.
FENRIR brand uses high-end fire-retardant fabrics and successfully passed this test.
Material
The motorcycle cover has an integrated three-layer structure fabric which is suitable for various weathers such as scorching sun, heavy rain and strong wind.
Air circulation design
There is an air circulation mechanism on the side of the motorcycle. Effectively drain the internal humidity. Because the air is easily discharged, it can reduce dust even in strong winds.(Note on Condensation Effects:On days with very large temperature differences between day and night, condensation effects may be encountered.it's not rain intrusion.This is condensation.Our air circulation system can only minimize this from happening, it cannot be avoided.)
Waterproof
The high water-repellent fabric is water-stopped from the cover, with a water pressure resistance of 10000MM.
High temperature resistant layer
It can withstand high temperature from the exhaust pipe（1054°F/550°C）or less. There is don't worry about the motorcycle cover being melted.
Fit model
Motorcycles and Scooter Length within 265CM
Drawstring design
There are elastic bands on the front and rear bottoms, which can be adjusted according to the size of the motorcycle.
Windproof buckle
Don't worry about the cover being blown away by the wind. There are 3 windproof buckles on the lower part of motorcycle. The windproof buckle fixes motorcycle cover from left to right.
Soft inner protection layer
The motorcycle cover has a high-density soft inner lining. You can protect your paint and windshield parts. don't worry about being scratched.
Waterproof tape
Each seam is treated with waterproof tape. So that every part can withstand the rain attack.
Reflective strip
Reflective strip increase visibility at night Warn pedestrians and drivers.
Suture processing
Each seam adopts a double stitching process to make the motorcycle more durable.
Lock hole
The cover with a large lock chain hole that is strong against theft make motorcycles safer.
Oscar
Reviewed in Mexico on February 22, 2025
Excelente calidad, le quedó perfecto a mi BMW 1300gs
cj
Reviewed in the United States on February 15, 2025
To get this good of a bike cover from a shop, you would easily spend triple! The quality is #1, heavy duty and I ordered the touring size (109”) and it covers the 2002 Goldwing perfectly. I will not reduce my rating for the shipping process time(a Month!), but be prepared to wait for it. It looks great, waterproof, and heavy duty. Came with a zippered bag, and no way are you gonna get it back in the bag. That’s fine, as it will make a nice bag in the side case or trunk for organization. You won’t regret this purchase as long as you order right size for your needs. If you screw that up, it’s on you. 🤣
Bruno
Reviewed in France on January 6, 2025
Prend parfaitement en compte mon 1000CBF avec top-case et valises d'origines. Bonne qualité et intérieur doux et parfaitement étanche.Je n'ai jamais oser mettre la house en contact direct avec le pot d'échappement tant qu'il est chaud.
Robert Conklin
Reviewed in the United States on September 24, 2024
I have always had issues finding a cover for my 2014 Harley Davidson Electraglide Ultra Classic. It was always difficult to cover the windshield, hardside bags, and trunk so the covers were always short; even one from Harley! This cover fits perfectly, like it was custom made. The fabric is soft on the inside and very sturdy and pliable and here in South Carolina it’s already been through a tropical storm with no issues. It has three straps going under the frame to keep it well in place in the wind. This cover is a little more pricey than others but I think if you have a large road type motorcycle this cover is highly recommended.
Dr chadmodrincodboinger
Reviewed in the United States on September 17, 2024
Product is high quality inside and out robust, smart looking professional very easy to fit over my BMW RT there are quick disconnects on bottom side that will lock it in however there are also sinch cords one at the front and rear which appears to hold it snuggly in place (quick to use) if high winds become a problem the quick disconnects will definitely resolve. It is in my opinion far beyond expectations. I took a gamble and this one won!
yves Herion
Reviewed in Belgium on September 12, 2024
Super... Rien à ajouter...
B Alexander
Reviewed in the United States on July 25, 2024
I have two of these that I use on 2014 and 2019 Spyder RT LTDs. It's a very nice cover, but would benefit from a couple of improvements.This cover is heavy and strong. It is not something you can wad or fold up and tuck away in the saddlebag. OK, *maybe* you could get it crammed in there, but it's pretty bulky. However, because it is heavy duty, it will protect your bike very well.The antenna hole is on the left rear and the antennas on both of our bikes are on the right...your bike may be different.The breather panels on either side, under the mirrors do not have mesh screen, just holes, so spiders can get in with your Spyder :) Not that they couldn't come in from the bottom but it seems less likely.The front and middle straps are just BARELY long enough, especially the middle one. I have it all the way out and it's quite tight, as seen in my pics. They REALLY need to add 2 inches to that one at least and an inch or two to both front ones so you could easily wrap them around the bottom of the tires would also be great.The soft lining is nice, but on every seam, they have seam tape, which is good because it keeps the seams from leaking, but it also is not as soft as the thin flannel layer on the inside of the main material. That is why I don't trust it on my windshield. I bought some soft velvet pillow shams which I turned inside out, pulled off the zipper handle, and cut two slits in the bottom on one side, corresponding to where the windshield mounts are (see pics). I slide this over the windshield before putting on the cover and I feel very confident that my bike is well protected.The pillow shams are white so I can easily see if I get any crud on them so I know to give them a wash. These are the oneshttps://www.amazon.com/dp/B0CPTRW79L?ref=ppx_yo2ov_dt_b_product_details&th=1
Mike Pace
Reviewed in the United States on July 23, 2024
It’s an all around good cover. It’s worth the $80. It looks good, keeps the cycle dry, and fits like it should.
Patrick G
Reviewed in the United States on December 25, 2024
Very heavy duty. Just been using it 3 days but it feels solid and covers the whole bike. Not easy to travel with.
Volker H.
Reviewed in Germany on November 18, 2024
Die Motorradhülle passt 100% auf meine Piaggio Beverly 400 HPE,Ich habe vorne eine hohe Scheibe und ein großes Topcase drauf.Endlich eine Hülle die passt.Qualität macht einen guten Eindruck. Bin gespannt wie sich im Regen und Schnee bewährt.
Quintin
Reviewed in the United States on November 1, 2024
This product fits my R1200gs its very nice and the quality is excellent I am very happy.The cover is a thick material will protect my bike for years.
Sharp as a Brick
Reviewed in the United States on July 14, 2023
Some people treat motorcycles as a dangerous expensive hobby.I've had motorcycles ever since I was too poor to afford a car which ran properly XDOver the last couple decades I've bought and used up a selection of covers in various weights, 180d and 210d being the most common available fabrics. These are OK for dust covers, or protected areas, but UV ruins them in short order, and then the wind comes to finish the job.So much that, I took to painting them as a way to reduce UV damage.That may sound ridiculous, but consider buying the cheapest cover ($16 Tokept) painting it camouflage to match your local area, and if (when) you have a breakdown, the bike can be pushed into the ditch and hidden until you can get back to recover it. I've done this twice, one time there was a group of people standing very close to where I'd hidden the bike, without ever noticing it. Cough. People. You know which ones. Cheap insurance, but I digress.Now I have a place to store the nicer bikes inside, and I wanted a nice cover. If I could find one, that is.Unlike the last 3 "heavy" covers I purchased, this one is a legit 420d, or close enough that I cannot tell. Think, lighter end of duffel bags or backpacks. These cloth numbers designate weight, look it up.The lining inside is a big step up, I've seen bikes damaged from the wind scrubbing them down with their own cover. The slashes around the mirrors help prevent mirror blowouts, and are convenient for accessing the bike while covered. For the Goldwing, it reaches the floorboards and bottoms of the saddle bags, and the shape is almost perfect. This length is a good balance if you want to avoid rain splashing dirt up onto the cover. Careful around the folded down antenna. I commute the Wing, it's a roadwarrior, and is rarely covered.Recently a custom-everything with extensive airbrush, garage kept and spotless Kawi VN2000LT came to live in my garage. It has more chrome one one side, than my previous 10 bikes combined. I spent most of a week polishing all the stupid chrome (including remnants of a cover that touched hot pipes) and decided that this bike should STAY clean, period.Kawi profile includes old guy windshield, big bags, and a sissy bar w/ luggage rack. This is a beast of a motorcycle, larger even than the mighty Goldwing, in all but height. Cover comes within 1 inch of the floor. Perfect. Not too short (it's kinda short on the wing) and NOT dragging on the floor where it will get dirty.There is no metal lock ring to scratch paint. I haven't melted it on the pipes. The fuzzy liner makes me feel much better about the airbru$$$$h being safe under there.I really like this cover, even if it were $100. If you have a nice bike, keep it that way.
Recommended Products