Your cart is empty.
Your cart is empty.
LENGTH: 18 feet
MATERIAL: EPDM Rubber with Acrylic Foam Tape
COLOR: Black
FEATURES: Isolates Vibration， Minimizes Friction， Provides Protection, Eliminates the risk of pinching rocks and debris between the fender flare and the body of your vehicle.
INSTALLATION NOTES:
1. Because this T-shaped rubber trim has a double-edged structure, which is thicker than ordinary rubber trims, if the fender has a 90-degree or acute-angle curved edge, this part will form a wrinkle. It is recommended to trim at the 90-degree point by using a razor. Make them look as seamless as possible.
2. In order to make the flare trim and the fender flare firmly adhere, prep the surface ensuring no dust or moisture is on the fender flare before installation.
Charles Lee
Reviewed in the United States on February 24, 2025
I see some reviews stating that the adhesive isn’t good or it sticks to itself and hard to peel of if it gets stuck to itself or it’s not self explanatory. There’s enough for all 4 fenders and there will be extra for 2 fenders just in case.1) just make sure the surface of adhesion is clean and dry2) as you are attaching the beginning, go slow, put pressure so it sticks well, don’t try to stretch it to save extra because at the end you’ll have places where it’ll come right off, as you move along you will slowly peel of the adhesion sticker.3) after installation if there’s small wavey areas just run your finger through the whole strip and it will flatten itself out and then cut off the excess.4) you gotta let it settle overnight and not let it get wet for maximum adhesion.
Charles Lee
Reviewed in the United States on February 24, 2025
I see some reviews stating that the adhesive isn’t good or it sticks to itself and hard to peel of if it gets stuck to itself or it’s not self explanatory. There’s enough for all 4 fenders and there will be extra for 2 fenders just in case.1) just make sure the surface of adhesion is clean and dry2) as you are attaching the beginning, go slow, put pressure so it sticks well, don’t try to stretch it to save extra because at the end you’ll have places where it’ll come right off, as you move along you will slowly peel of the adhesion sticker.3) after installation if there’s small wavey areas just run your finger through the whole strip and it will flatten itself out and then cut off the excess.4) you gotta let it settle overnight and not let it get wet for maximum adhesion.
ksarks
Reviewed in the United States on January 24, 2025
Was really happy with the look basically identical. Was worried about them being too bulky but they look amazing. Definitely recommend for someone looking for a cheaper route then OEM like myself.
ksarks
Reviewed in the United States on January 24, 2025
Was really happy with the look basically identical. Was worried about them being too bulky but they look amazing. Definitely recommend for someone looking for a cheaper route then OEM like myself.
Reb
Reviewed in the United States on September 28, 2024
They should make the gap wider to make it easier to apply to fender flare. It’s not easy to get these on. Took me about 30 minutes per flare to apply
Reb
Reviewed in the United States on September 28, 2024
They should make the gap wider to make it easier to apply to fender flare. It’s not easy to get these on. Took me about 30 minutes per flare to apply
Gerry
Reviewed in Canada on July 9, 2024
was ordered as a product which works with flares purchased however does not work with flares ordered
Gerry
Reviewed in Canada on July 9, 2024
was ordered as a product which works with flares purchased however does not work with flares ordered
SuitsD
Reviewed in the United States on July 5, 2024
This is easy to install, peel and stick, and you can measure to length and cut what you need. Works really nicely at sealing off my fender flares and protection of my doors. ALOT cheaper than buying 15 feet for Orielly and Autozone
SuitsD
Reviewed in the United States on July 5, 2024
This is easy to install, peel and stick, and you can measure to length and cut what you need. Works really nicely at sealing off my fender flares and protection of my doors. ALOT cheaper than buying 15 feet for Orielly and Autozone
Juan Pablo The Pool Guy
Reviewed in the United States on July 11, 2024
Used this to replace the C-channel style that came with the flares installed on a Tundra. Driving desert dirt roads the mesquite and creosote brush pulls the edging off. Also, the original edging wouldn’t stay in place around the gas filler cap. This took a little practice to get on but once it’s in place it adheres well. I’ve had no problems with it coming loose or tearing off.
Juan Pablo The Pool Guy
Reviewed in the United States on July 11, 2024
Used this to replace the C-channel style that came with the flares installed on a Tundra. Driving desert dirt roads the mesquite and creosote brush pulls the edging off. Also, the original edging wouldn’t stay in place around the gas filler cap. This took a little practice to get on but once it’s in place it adheres well. I’ve had no problems with it coming loose or tearing off.
Sam C
Reviewed in Canada on July 1, 2024
I repainted my fender flares and had to peel off the original tape that came with them. This tape works great, it’s holding up well and saving my truck paint from getting gouged with the flares edges. definitely worth it 👍🏻
Sam C
Reviewed in Canada on July 1, 2024
I repainted my fender flares and had to peel off the original tape that came with them. This tape works great, it’s holding up well and saving my truck paint from getting gouged with the flares edges. definitely worth it 👍🏻
Crazy X
Reviewed in the United States on March 30, 2024
Once I found my order at the wrong address I was good, first of the flare gasket was packaged perfect in a ziplock clear plastic bag rolled neatly. The edpm was perfect very easy to work with. Installed the gasket on both rear flares without any problems, once I was through before placing my flares back in place I went back over the gasket to make sure there wasn’t any movement . Once I finished installing my rear flares I liked the way the gasket was pressed up on the body of my Ford Superduty no gaps at all. I highly recommend if anyone is looking for replacements for their flares get these you won’t be sorry. I will update after a few weeks on how the gaskets hold up. I will add a couple photos also tomorrow.
Crazy X
Reviewed in the United States on March 30, 2024
Once I found my order at the wrong address I was good, first of the flare gasket was packaged perfect in a ziplock clear plastic bag rolled neatly. The edpm was perfect very easy to work with. Installed the gasket on both rear flares without any problems, once I was through before placing my flares back in place I went back over the gasket to make sure there wasn’t any movement . Once I finished installing my rear flares I liked the way the gasket was pressed up on the body of my Ford Superduty no gaps at all. I highly recommend if anyone is looking for replacements for their flares get these you won’t be sorry. I will update after a few weeks on how the gaskets hold up. I will add a couple photos also tomorrow.
Flash
Reviewed in Canada on October 31, 2024
Works perfect just make sure you clean the area really good then pull off the red backing about 1 inch from the end then install then slowly remove the backing and press down on the backing as you go along, make sure to install when it's warm out for better adhesion or use a blow dryer or heat gun
Flash
Reviewed in Canada on October 31, 2024
Works perfect just make sure you clean the area really good then pull off the red backing about 1 inch from the end then install then slowly remove the backing and press down on the backing as you go along, make sure to install when it's warm out for better adhesion or use a blow dryer or heat gun
MKrimo
Reviewed in France on October 16, 2024
Le rendu est sympa, par contre je ne pense pas que ça durera dans le temps, ça ne collait pas très bien.
MKrimo
Reviewed in France on October 16, 2024
Le rendu est sympa, par contre je ne pense pas que ça durera dans le temps, ça ne collait pas très bien.
Mike F.
Reviewed in the United States on October 13, 2024
Got this to fill the tiny gap between my fenders, but this didn't stick very well and kept falling off
Mike F.
Reviewed in the United States on October 13, 2024
Got this to fill the tiny gap between my fenders, but this didn't stick very well and kept falling off
Gerald Banks Jr
Reviewed in the United States on April 15, 2024
Used to help make a seal for my fender flares. Easy to install well worth the money
Gerald Banks Jr
Reviewed in the United States on April 15, 2024
Used to help make a seal for my fender flares. Easy to install well worth the money
Luke Holmes
Reviewed in Australia on October 1, 2022
Love that it has double sided tape to make it super easy to apply, makes the finished product look professional
Luke Holmes
Reviewed in Australia on October 1, 2022
Love that it has double sided tape to make it super easy to apply, makes the finished product look professional
Recommended Products
