Your cart is empty.
Your cart is empty.TJN
Reviewed in the United States on February 3, 2025
Install was a bit of pain. I thought it was a 5 minute job and it turned into a 20 minute job. I ended up reusing the factory clips because the clips that came with the new visor weren't as heavy duty which was causing some of the install issues. The visor itself looks great, stays up and works the light correctly. 2011 Camry with sunroof, perfect fit.
Geri
Reviewed in the United States on January 8, 2025
Replacing the one that broke off.
Matthew McNeill
Reviewed in the United States on January 30, 2025
This sunvisor fit perfect it pop right in with no issues. The vanity light works perfect and it looks good and matches great as well. I highly recommend this sunvisor.
Michael DeAngury
Reviewed in the United States on January 20, 2025
The Ezzy Sun Visors arrived quickly and exactly as described. They were a perfect color match and fit for the beige interior of my 2007 Toyota Camry Hybrid. They come pre-wired for headliner vanity lights which work perfectly when operating the slides to the vanity mirrors. Installation did not take long. Be careful when prying off the old mount and don't lose any clips behind the window trim.
Kuddy
Reviewed in Canada on August 17, 2024
No dislikes, it fits and does the job. Why didn’t I buy it sooner!
Matt W
Reviewed in the United States on December 26, 2024
Perfect fit and very easy install. A great product for the price
Customer
Reviewed in the United States on December 16, 2024
Easy to install after watching a YouTube video! My vanity light works perfectly! Makes my car look new! Exact color match to my old visor
Alondra
Reviewed in the United States on October 6, 2024
The product is really solid, BUT, know these things before you begin working to replace the visors.1. The clips that come with the new visors are weaker than the originals the car came with. Because of this, I used the old ones and just opened the clips before putting them on the new visor. Opening the clips (as shown in the image) made them stronger so the visor doesn't wiggle around. You will need to use your flat head screwdriver to fit the clip into the visor. You'll notice when the clips are in the visor, they are a lot more stable, stronger, and don't wiggle around in it's hole.2. Also, the rod inside the visor is VERY tight out of the box so you will have to man-handle it a little to get it mobile so you can open and close the visor once it's fully installed.3. Make sure you wear disposable gloves because it is slightly dirty/rusty and the clips DO hurt your fingers a bit, even with using a flat head screwdriver.4. When you get to the point where you just need to put the cap on at the end, use the flat head screwdriver to open up the hole in between the clips. This way the 2 square bits on the cap that attach inside the clips actually go in.Total installation time took about 1 hour because we didn't know what we didn't know. Knowing what we know now, it could have taken us less than 8-10 minutes for BOTH left and right visors combined. About 3-4 minutes each visor.Overall, we're happy with the new visors and they open and close perfectly now. Also, the lights work too when you open the slider for the mirror!!!The only thing I noticed was that the fabric color was slightly off between the left and right visor. It's not very noticeable, but wanted to mention that for anyone who want's a perfect color match between the left and right visors. Ours came in slightly different in color, but I don't mind.5/5 for me overall. Happy with the results. I hope this review helps!
Lutong Bahay ATBP
Reviewed in the United Arab Emirates on October 25, 2024
Works well with my camry 2009 sports.
SunnyJ
Reviewed in the United States on April 18, 2024
We liked the quality of these visors, can't tell difference in quality from the original. They did not come with instructions, so we looked up various videos on Youtube. Some were helpful, some not. We learned by trial and error, when you remove the old visor, be sure to remove the cap/covering the connection first. You can pry it loose with a flathead screwdriver. Even then, the prongs could get stuck inside the head liner, so pull it out carefully. But, be SURE to leave the cap ON when you install the new one. Otherwise the prongs may pop right out and fall inside the frame. The cap actually locks the prongs in place. I have the 2010 Camry LE with sunroof. It has sort of 2 toned interior, mostly light gray, but some areas are a sort of putty color. The beige color shown is not the same beige as the interior parts, and I thought it would clash, so we ordered the gray. Its very close in color tone, but is slightly darker than the original visors. We ordered a 2nd visor and now they both match, and blend in well with the interior of the car. Other than installation and color match, this is a very good item, and a great value at this reasonable price!
علي المحمد
Reviewed in Saudi Arabia on August 30, 2023
جميل جدا يركب على كامري من موديل 2007 الى موديل 2011
Taylor W
Reviewed in Canada on September 11, 2022
The texture isnt quite as fuzzy as the OEM visor but the colour match is great, can barely tell it's not OEM.Please note the 2 metal installation clips provided don't work well. Use the OEM metal clips and plastic retaining cover that goes over them. I've tried for about 20 min to install with the new clips then when I decided they weren't holding as good as they should have I tried the old clips and it held in place nicely. Installation is super easy, but only if you use the original clips!
Rafael
Reviewed in Mexico on December 3, 2022
Está súper bien y a la medida
Recommended Products