Your cart is empty.
Your cart is empty.Product Description
-
Fast & Easy Installation
- No drilling or screws required
- Works on most cars and trucks
-
Handles All Conditions and Weather
- Protects from costly paint damage
- 3M adhesive with all-weather durability
-
Made in the USA
- Customizable
- Stylize your vehicle to give it a distinctive and customized look
-
Extend your fenders by up to 1 inch
- Designed protect your paint from dirt, grime and scratches
- Transforms the look of your car or truck
-
Installation: Step 1
Peel protective film from tape starting at one end of the Fender Flares and attach to surface of vehicle.
-
Installation: Step 2
Firmly press and hold the Fender Flares for several seconds against the surface of your vehicle. Make sure there are no air bubbles or gaps.
-
Installation: Step 3
Cut excess off with scissors.
Fender Flares
Compare our Flares
1 inch | Extends your fenders | 2 inches |
3/5 | Durability | 4/5 |
| | 3M adhesive | |
Dura-X Foam | | |
InvisEdge | | |
Dual-Edge Protection | ||
Serrated Adhesive |
1 inch | Extends your fenders | 2 inches |
3/5 | Durability | 5/5 |
| | 3M adhesive | |
Dura-X Foam | | |
InvisEdge | | |
Dual-Edge Protection | | |
Serrated Adhesive | |
- Fender Flares PRO
- Fender Flares MAX
Andrew
Reviewed in Canada on February 8, 2025
Be sure to clean your application surfaces properly and these are a breeze to install. I figured that since they were made from a rubbery-foam they wouldn't last overtly long, but they've been on my vehicle for over a year with no major damage at all, even from regularly driving gravel and snowy/icy roads! I continue to be pleased with these, despite the lower cost and complexity when compared to bolt-on fender flares.
Whitney
Reviewed in the United States on August 2, 2024
Easy to apply to vehicle. Use a heat gun to heat up the adhesive first then apply. Been through numerous pressure washes and still looks new. They need to be longer rolls however as need 2 sets just to do one vehicle which makes it expensive.
Nick
Reviewed in the United States on August 13, 2024
The idea is good, and I need these to pass state inspection - but one piece of this fender flare is barely enough to line 2 of the 4 wheel wells on my standard sized SUV......Product description should clearly outline this, as now I need to order another piece and wait for delivery.......
Michael Stillwell
Reviewed in the United States on July 25, 2024
This is a great product and it looks great. It’s easy to apply. My only complaint is the amount that you get on one roll. I would give this five stars if I could do all four fenders with one purchase.!
chris
Reviewed in the United States on May 3, 2024
Wanted to extend my fenders on my 20/20 Ridgeline just a little bit I read the reviews and I went with these I took the time to clean and prep the surface very well and stuck them on they have been on for well over a month now with zero issues and they look fantastic!
Camaro Guy
Reviewed in the United States on October 1, 2024
Looks good. Adhesive is good. Easy to install.
Cathl
Reviewed in Germany on April 28, 2024
Hab diese Verbreiterungen für mein Wohnmobil gekauft und sie auf die schon vorhandenen originalen Verbreiterungen geklebt. Kleber hält sehr gut und die Montage war simpel. Material ist weich und lässt sich gut verarbeiten.
Almond
Reviewed in the United States on August 2, 2022
I really wanted to love these.. they would’ve looked cool on my car if they didn’t fall off on the freeway 😐 I prepped the surface with isopropyl alcohol, followed directions completely, and it held up and looked great until I lost them to the highway?? Don’t waste your money on these unless you literally never plan on driving your car at speeds over 10mph..
Neftanik
Reviewed in the United Kingdom on November 9, 2022
Bought these for my Lada Niva as I’d fitted 25mm spacers. These literally took 5 minutes to fit and actually look very good. Been on for 6 months and show no signs of wear or adhesive issues. Only comment is why sell in packs which are only enough for 2 wheels? It’s a bit misleading TBH
ana
Reviewed in Spain on November 29, 2021
En realidad no es un material que aguante mucho el trote para el que está destinado. El material es como una especie de esponja que se rompe con cualquier golpe.
Edd Ordaz
Reviewed in Mexico on December 19, 2019
Excelente
Kendal K Mateo
Reviewed in the United States on August 27, 2018
First off this is a fantastic product for its price. I love the customization it adds to the look of my 4Runner on top of the extremely easy install and ruggedness of its appearence.The front flares were put on a week before and not a moment too late as hurricane Lane came through the Hawaii islands a few days later. I’ve got to say they do hold up well in heavily wet conditions. The structure of the product is pliable rubber, yet very resilient. I’ve gone through rough gravel patches with the front flares and so far the material is holding up better then expected. I was initially worried about the adhesive not being able to bond well but as long as you clean the surface throughly and make sure it is bone dry, I waited an hour after washing then used a heating gun to ensure the area was completely dry, there should be no issues with it coming off.This could be due to a miscommunication on my part but it was quite difficult to understand how much length acctually comes in the package so I did have to order a second set as the first only covered my front end. You should measure your area you want covered before hand then order depending on how long that may be.Overall I’m extremely satisfied with this product.
44CLuTCH
Reviewed in the United States on July 2, 2017
Pretty unsatisfied. The idea is great, the product, not so much.I bought two of these 8.5ft flares to prevent my wide tires from flinging up gravel and debris into my beautiful paint.Upon receiving, I was surprised to find that "foam rubber" in the description was more foam than rubber. It has the same density as door seals and other types of sealing foam rubber. No way will this stand up for very long.Install was easy. The double sided tape stuck, the fact I didnt have to drill holes was one of the major reasons I went with this brand. I doubt the tape will hold for more than a year - it definitely wasn't name brand stuff. The only tough part is keeping the flares in a straight line during application. That soft foam just isn't rigid enough to keep a sharp alignment when installing.Trimming is easy with a sharp pair of kitchen shears. Be warned though, when you trim it, you will expose a nice patch of porous foam, which looks godawful if you are trying to taper the ends to match the curve of the fender. Lovely.I'm sure there's better stuff out there. The idea is great, but the materials are not automotive grade. It looks hokey. Hopefully they do the job, if not, it's easy to rip them off I suppose.
Recommended Products