Your cart is empty.
Your cart is empty.Lifting your sport bike for maintenance or storage is easier than ever with the Sport Bike Motorcycle Front and Rear Lift Stand with Triple Tree Attachment from Extreme Max Products. Consisting of two individual stands that work separately or as a unit, the front lift stand assembles as either a cradle lift that nestles underneath your front wheel forks, or as a triple tree stand that slides into your bike's triple tree, while the rear lift stand cradles your dual-side swing arm spools (not included), getting your bike off the ground and into the perfect position for maintenance, repair or storage. As possibly its best feature, the lift stands are incredibly easy to use. Position the stands to the proper locations on the bike, then simply lower the handle down for a nice, smooth lift. The handle then becomes the stand's base, wide enough to maintain stability and strong enough to never sag. The Triple Tree Headlift comes equipped with five triple tree pin sizes to fit most sport bikes available today: 13 mm, 15 mm, 16.5 mm, 17 mm, and 19 mm. The front fork-cradle assembly fits from 9.5" to 12.5" in width, while the rear spool attachment fits swing arms from 10.75" to 13.5" in width. Swing arm spools are required for use with the rear lift stand and are not included. Before use, ensure that the motorcycle has adequate room to access the triple tree. Motorcycles with oversized or bulky front fairings, headlight modules, and fenders may not allow the triple tree stand access to the proper lifting areas. Extreme Max recommends that all bikes be secured to the stands with straps while lifted as an additional safety measure. Additional triple tree pin kits are available containing pin sizes 20 mm, 21 mm, 23 mm, 24 mm, and 27 mm: see Extreme Max 5600.3222.
Brad Tidball
Reviewed in the United States on February 1, 2025
Works great on my GSXR 600 and Yamaha R3. I can even sit on the bike while it's on the stand with no issues. I use the triple tree stand for the front and the spool stand for the rear and it is very stable in that configuration.
Darwin Stahl
Reviewed in the United States on July 13, 2024
Love the triple tree design. They are great value and quality. The only thing you will need is a 17mm socket but they are super easy to put together. You can take they apart or clean them easy too. I’m sure these will hold my bike and preform well for a while.
Hoang
Reviewed in the United States on July 10, 2024
Rear stand is fine. Front lower triple attachment doesn't come with a pin that fits the Ninja 400 well (they were all too small) and the stand pushes into part of the fairing a little bit (at the nose, just under headlights). Still lifted the bike okay and no damage to the plastic.There were a couple manufacturing defects. Each stand comes in two pieces where you have to slide a smaller tube into a larger tube then bolt together. One piece was out of round enough that it didn't fit into the other, so I hammered it into shape to fit. And one of the front fork attachments had a little piece of metal protruding from it (slag?) that made it difficult to slide the spring on. I grinded it down to make it work.Otherwise this is not a bad set for the money - ultimately gets the job done. Only used it once so take this with a grain of salt.
Anonymouss
Reviewed in the United States on November 26, 2024
Pins do not fit as advertised (2018 MT09) - the 19mm is the correct size, but it’s half the length I need to fit my bike. The tire doesn’t even come fully off the ground. Now I have to spend more money on pins that actually fit.
Nick N.
Reviewed in the United States on November 16, 2024
Ok so putting it together was just a tad more complicated than I expected but there were clear written instructions for it. Once I got it together and adjusted it to fit my bike the triple tree and rear stand were perfect. My front tires about 2 inches off the ground and my rear tires about 3 inches up. Plenty of clearance on both tires to remove them and do what ever maintenence maybe needed. It's plenty sturdy. If I really wanted to I could knock my bike over while it's on both stands but I'd have to put some effort into it. All in all I think it'll serve it's purpose of maintaining and storing my bike just fine. Can't beat the price for the product. I will update in 6 months to a year to see how it's held up.
nafiza
Reviewed in the United States on October 24, 2024
This is about as cheap as you can get a pair of stands with a triple tree mount. It did exactly the job I needed. It fits the FZ07.
Mike
Reviewed in Mexico on January 28, 2024
The media could not be loaded.
Osvaldo Reyna
Reviewed in Mexico on February 24, 2023
Cumple muy bien con su función y la relación calidad precio es fenomenal.Los materiales son ligeros pero de muy buena resistencia, reforzado, facil de utilizar, lo unico que no me agrado fueron las ruedas hubiese preferido unas de goma pero de igual manera son resistentes y duraderas, en mi caso mi moto no cuenta con spools sin embargo pude apoyarlo sobre el eje por el momento solo para lubricar cadena y lavar la moto mientras le coloco unos spoolsEl paquete llego muy bien embalado en una caja desarmado todo (viene con una llave alen para armar las piezas sin embargo requeriras deUna llave de dado)
Cyndi Reeves
Reviewed in the United States on January 13, 2023
The media could not be loaded.
SKL
Reviewed in Canada on April 24, 2023
I found these on sale and had to snag them up.They feel solid and support my Z400 which weighs about 370lbs with no issues at all. There is minimal wobble when I push the bike side to side so I know it won't fall and tip over.My bike uses a 21mm pin and this stand comes with a 19mm as the largest size. There's absolutely no issues as that 2mm difference is not enough to even have any noticeable play.
Gio
Reviewed in the United Arab Emirates on June 14, 2021
Good
AV
Reviewed in the United States on October 16, 2021
Awesome for the price! Use them on a 2021 vitpilen 401. Was rally unstable in the rear at first, like some of videos. I retightened them to the point where you’re not sure if it’s beginning to bend the tube or not. Gave it another try, and very stable now.Not the best you can get, obviously, but for the price it’s perfect. So if yours feels unstable and you’re sure it’s pretty tight…just tighten them a bit more.
Thomas Lee
Reviewed in Singapore on April 29, 2020
Unable to lift my XSR900 front wheel. Useless.
Recommended Products
$41.55
$ 19 .99 $19.99