Shopping Cart

Your cart is empty.

Your cart is empty.

Extra Center Section For BRIDJIT Curb Ramp Set

Free shipping on orders over $29.99

$189.99

$ 78 .99 $78.99

In Stock

About this item

  • This 47-inch wide center section is used to EXTEND the main 3-piece BRIDJIT curb ramp set (sold separately, ASIN B0042HOE5O) beyond 12 feet wide; Purchase as many as needed for total coverage of your driveway width.
  • Extend the BRIDJIT ramp set and protect your car truck or SUV from scraping the undercarriage on the concrete curb/sidewalk area as you leave or enter your driveway
  • Made in the USA from recycled tires, BRIDJIT ramps are resistant to weather, UV rays, and normal daily use. They won't be damaged by street sweepers or delivery trucks
  • Each section of ramp has a channel underneath that allows water to flow without moving or shifting the ramps
  • Easy installation with basic hand tools - All you need is a hammer and screwdriver; Bolt this extra center section together with the main 3 piece set using the pre-inserted galvanized bolts to connect the sections, not to the ground



Product Description

Do you feel a jarring, jolting bump when you drive in or out of your driveway? With a set of BRIDJIT Curb Ramps, you can put an end to that - it's the No Jar To Your Car Rolled Curb Solution.

Designed to fit the most common types of rolled concrete curbs in the USA, BRIDJIT Curb Ramps rest in the curb area between the street and the sidewalk. Because they're a ramp, they reduce the impact you feel when you drive your car, truck, SUV, motorcycle, RV, or trailer over the curb. Because BRIDJIT Curb Ramps are made from recycled tires, they're extremely durable - they won't break or fall apart with daily use. And Because BRIDJIT Curb Ramps have been around since 2008, they are the most refined ramp for rolled curbs that you can buy.

BRIDJIT Curb Ramps bolt together, and feature tapered ends

The Most Refined Curb Ramps You Can Buy

BRIDJIT Curb Ramps are a tested and proven product. We've put a lot of time into designing a curb ramp that will stand the test of time:

  • Our ramps are heavy duty - we use a very dense, very durable material, and each section weighs about 50 pounds.
  • We provide hardware to bolt all your ramp sections together. Once bolted together, our ramps stay put.
  • Our ramps are tapered at each end. That way, when a delivery vehicle, trash truck, or other large vehicle drives down the street, they won't damage or move your ramps by driving across them.
  • Our ramps have an integrated channel for water to flow underneath, so they don't block drainage.

Why BRIDJIT Curb Ramps?

BRIDJIT Curb Ramps Are The Product Of A Rigorous Process

The Smartest Curb Ramp Design You Can Buy

BRIDJIT Curb Ramps have been designed with every contingency in mind. Our ramps bolt together for stability and security, but our hardware allows for a little "give" so they can fit around a curve (like on a cul de sac). Our ramps have tapered ends so they're not damaged by delivery trucks. They feature an integrated water channel, so they don't block drainage. Because they're not bolted down to the curb, they can be temporarily flipped out of the way for street cleaning.

When it comes to design, we've got the smartest one.

BRIDJIT Curb Ramps are designed to last

Unsurpassed Durability

We manufacture our ramps from a very heavy, very dense mix of materials. We do this because we know the ramps are going to have to support the weight of every vehicle that drives across them - from large SUVs and motorhomes to big delivery vehicles and garbage trucks that will drive across the ramps longways. We also know our ramps are going to sit outside 24/7, and will experience extreme heat as well as bitter cold.

BRIDJIT Curb Ramps are made from recycled tires

We Use Recycled Tires To Make Our Ramps

Every year, millions of tires are thrown away. At BRIDJIT, we're doing our part to put these discarded tires to good use.

We use crumb rubber from recycled tires to produce our ramps. While we like crumb rubber because it's very tough, it's also good to re-use rubber whenever possible. New rubber is easier to work with, but it's often harvested from trees that grow on plantations in the rain forest. Instead of displacing rain forest, we're recycling.

BRIDJIT Curb Ramps Are Made In The USA

Our Ramps Are Made In The USA

BRIDJIT Curb Ramps are Made In The USA. Supporting US manufacturing and US workers is one of our corporate values. However, we also like to manufacturer our ramps in the USA because:

  • We can ensure maximum quality
  • We can reuse discarded tires from US consumers
  • We don't have to ship heavy ramps halfway around the world, which would be wasteful
Expand your BRIDJIT Curb Ramps With an Extra Center Section

BRIDJIT Curb Ramps Are Expandable

A standard set of BRIDJIT Curb Ramps includes a left, right, and center section, and is about 12 feet across. Extra center sections are available, allowing you to expand your BRIDJIT Curb Ramps to the full width of your driveway.


Dennis
Reviewed in the United States on September 13, 2022
The units were of good quality and relatively easy to assemble, and having an extra person with you during the assembly process, would be a plus. However there were 2 nuts that were not included in the packaging, which made me stop what I was doing, and drive to the nearest home depot to replace the missing nuts. (they are a special thread, and exterior finish). Having to do that turned a half hour job into well over an hour. We chose this brand, even though it was more expensive than their competitors because I thought having a better quality product was worth the extra cost. Little did I know that their lack of quality control would have me paying even more in wasted time.
Ruth Woody
Reviewed in the United States on June 8, 2015
Anyone with cars that are low to the ground - like sports cars or with ground effects (my husband has a custom Roush Mustang) will love these. He could not get the car into the driveway due to the incline of the driveway for water drainage. He had to back in at an angle and it took him the longest time to get the car up the drive and parked in the garage. Now, he can pull right in or back in, his choice and it's perfect!! Also, we live in a pretty picky community, both from the HOA and the City inspectors. They drove by (The City Inspector) - stopped, looked at the ramps, smiled and waved at my husband. Basically letting him know they were perfect within code. Now we have several neighbors grabbing the web address and telling us they are going to order them for their driveways. Final note.. these dudes are "heavy" so make sure if you are not strong, you have someone to help you get them into place. We had a major storm here, huge amount of water running (we live just off a wash) and they only moved maybe an inch! Not sure how much they weigh, but I'm guessing a couple hundred pounds.Note: we have two ends and the center pieces)
Ron
Reviewed in the United States on March 14, 2013
We moved into the first house with a curb you have to drive over to get in the drive. No matter how you approach or exit to roll over the curb it rocks your vehicle back and forth or tries to rip the facia off. It can't be good for the vehicle to drive over the curb like that over time. I have a F150 4x4 and my wife has a small Chrysler 200 so if we weren't rolling back and forth like on a carnival ride in the truck, we were dragging the front off in her little car. Day after day of rolling over that silly curb; I'd like to kick the genius who thought it would be a good idea to build a driveway like this. I got the BRIDJIT and followed the directions on installation. Now it's as if there's no curb there at all. Seriously, it's so smooth now. Both vehicles roll smoothly out of the driveway so take it from me, yes, it is worth that much! You won't regret it. Our drive is 16feet wide so I bought the set of three and the extra center piece. It fits just right.
Randy
Reviewed in the United States on September 15, 2011
If you have steep curbs, like ours which are at 45 degrees, you need this product. We bought the original 3 piece set, but with a 3 car garage, we had to enlarge the driveway width which is why we needed this additional center section. Anyway the bridjit is a car saver. If you don't mind taking a run at your driveway and shaking your suspension to death, good for you. But if you want to save your car, these Bridgit driveway curbs are a must. They lock together very easily, with just a hammer, screwdrive and a block, and once in position WILL NOT MOVE so you don't have to worry about someone stealing them. They can be taken apart for addition of the single sections but you need more tools to do that, so for ease of installation, buy the correct number of ramps initially. They have a gouge in the bottom for water to flow through with no pipe or other restrictions. Made from recycled material so you are helping out Ma Nature. I like to back into my garage and WITHOUT these ramps I actually broke traction. Well no more. The Bridjit curb ramps work great, especially if you have one of the new low profile cars with the low profile tires. No more banging your undercarriage.
Taran Wanderer
Reviewed in the United States on November 12, 2010
I am delighted by the quality of the product and just blown away by the exceptional customer service. The owner, John Curry, is a very smart entrepreneur, truly cares about customer satisfaction and went to extraordinary lengths to resolve an issue I was facing.The ramps: They are just great. They have resolved the bumpy entry and exits from a high curb for my cars. They are of a robust construction; the assembly instructions are clear and they work exactly as advertised.The service: This is my recommendation for their outstanding service - it is very hard to find companies that stand behind their product and really care about the customer's experience. Bridjit Curb Ramps is amongst the rare few and they have earned my business and referrals.I found that the ramps were not sitting snug between the street and the curb, and were rocking. I sent an email to info@ and John called me right away. I was amused by John's innovative approach as a high-tech detective. We were both looking at the street view of my house on Google Maps; he zoomed in on the curb and saw that the channel between the street and the curb is shallow. John sent me another set of ramps that were specially modified for fitting in shallow channels. I have installed them and very happy with the new set.What's the big deal here?: On a $300 sale, John has sent a new set of ramps and spent $150 in shipping charges ($75 for shipping for the new ramps, $75 for shipping for returning the original ones). He has traded off profits to keep one customer happy and satisfied. How many businesses/business owners do you know of who would do this today?I visited the Bridjit website and realized that my experience is not an isolated one, there are several other customer testimonials for their product and the high quality customer service. Bridjit has earned my business and truly deserves yours too.Review for
Recommended Products