Your cart is empty.
Your cart is empty.Product Description
Anemometer, Rotating Vane And Thermistor Sensing Method, Data Logging No, Humidity Sensing No, Velocity (Fpm) 80 To 5906, Velocity (Mps) 0. 4 To 30, Velocity (Mph) 0. 9 To 67, Velocity (Kph) 1. 4 To 108, Velocity (Knots) 0. 8 To 58. 3, Air Velocity Accuracy +/-3 Percent, Air Volume 0 To 9999 Cfm, Temp. Range 14 Degrees To 140 Degrees F, Probe Size 2. 83 In. Dia. , Cord Length 3. 9 Ft. , Data Hold Yes, Auto Power Off Yes
From the Manufacturer
CFM/CMM Thermo-Anemometer can simultaneously display of Air Flow or Air Velocity plus Ambient Temperature. Easy to set Area dimensions (cm2) are stored in the meter's internal memory for the next power on. Additional features include: 20 point average for Air Flow and 3-percent velocity accuracy via low friction 2.83-InchD (72mm) ball bearing vane wheel on 3.9-Foot (120cm) cable. Comes complete with 9V battery, protective rubber holster and case.
George Deshon
Reviewed in the United States on April 22, 2024
Excellent Product
boroco
Reviewed in the United States on September 27, 2023
Ok
Kevin A.
Reviewed in the United States on July 30, 2023
Easy setup and functionality. CFM readings have to be multiplied by area. It has 8 memory storage values for this if your checking multiple ac vents. Better to know duct size not just register area. Averaging is best as readings fluctuate a lot. My only complaint is the airflow direction sticker is on the inside of the blade housing. I just added one to the outside with a paint marker. Sensor cord could be a little longer and the sensor handle needs a device to attach to and extension pole. Temperature portion is reasonably accurate and very handy for checking a/c air balance in homes since only 1 tool is required. Plastic of meter and sensor feels thin and cheap but lightweight. Don't drop this thing. Storage case is barely adequate but I will be adding the tool to an instrument hard case once I decide how attach an extension handle. Overall a decent reference tool.
Amaz0n Cust0mer
Reviewed in the United States on April 27, 2023
Works great for HVAC balancing, optimization and data gathering. Bearings are good and very low friction.
Es
Reviewed in the United States on April 27, 2022
Worked on supply side and exhaust side to know how much you’re getting air. L” x W” = answer divided by 144 and that where you get area.
Customer
Reviewed in Canada on February 6, 2020
Works well. Gives good baseline numbers to figure things out.
Customer
Reviewed in Canada on February 26, 2018
Easy to use and works well. Great price.
Hartmut
Reviewed in Germany on February 22, 2018
Das Gerät tut was es soll, grosse Anzeige und die Bedienung wie Handhabung ist einfach.Sehr praktisch ist die mitgelieferte Tasche.
Richard
Reviewed in Canada on November 21, 2017
Works Perfectly!
kelly hayden
Reviewed in the United States on July 26, 2016
The wind vein cord has a short in it. You have to wiggle the cord to get any readings from it. Once you wiggle the cord and set the unit down and DON'T move it, it seems to work fine. But as soon as you pick it up the cord looses signal.
Mr R F Allen/mrs d allen
Reviewed in the United Kingdom on March 7, 2015
The delivery was excellent, arrived the very next day. Well packaged and wrapped, The unit has a nice clear display and the back light really inhance's the display. The useful feature is having the vane on a cable, I have used other units with a integrated vane which can be problematic if the the grill or whatever you are measuring is above you which makes reading the display awkward. The average faclillity is another useful feature as I have had to take multiple readings write them down and work out the averages myself. This unit can do it for you but the results are only displayed for a short time, it would have been nice to have the ablity to hold the result on the screen. The build quality is not bad, a little plasticity but not bad. The back stand however is really flimsy and I can't see it holding upto continued use. I have a multimeter made by extech and the back stand is far more substantial even though it is plastic. The unit comes with a carry case with additional shoulder strap which is a nice touch. It is the basic nylon type of matirial which is not the best but certainly good enough. I haven't fully used the unit yet but first impressions are good. All in all not a bad unit for the price there are cheaper out there but I wanted a unit made by someone I have heard of, as I mentioned I have a multimeter and it has served me well and the company I work for is actually buying four of the multimeters.
Baloo
Reviewed in the United States on December 16, 2014
Really happy with this. Was able to balance the heating in my house to where I only have a 1 degree difference max between rooms. Prior to this, it was up to 8 degrees! Took a little practice to figure out the best way to use this. Extech Support was helpful via email. This gadget is worth the money for the comfort!
DutchBreeze
Reviewed in the United States on July 12, 2011
I got this Anemometer because it was affordable compared to other units that offer the same features. It comes in a nice case and looks professional. The digital handheld portion of the unit works great and feels nice, but the "wind vane" and its attached cord has aa cheap feel and is poorly made. The cord is not coiled, so its a bit awkward. After using this unit for 2 days providing me with accurate measurements, the wind vane stopped working and my screen just displayed an "OL" instead of CFM and Temp data... I think it was the poor quality cord and construction.. If Extech offers better wind vanes with coiled/flexible cords and a BNC style connector, i'll be buying their products again in the future.
Recommended Products
$135.00
$ 55 .99 $55.99
$41.76
$ 21 .99 $21.99