Your cart is empty.
Your cart is empty.Product Description
barbra m.
Reviewed in the United States on January 23, 2025
I like these blades. They cut well and I have not had any problems with them. This is a super savings item, it's unbelievable how many you get for the price. I will order these again if need be. Great purchase.
Christine
Reviewed in the United States on July 30, 2024
I am an avid Silhouette user - and I tend to be underwhelmed by the autoblade and how quickly it can get dull. I tried using these on an intricate project and all I can say is WOW. You have to really play around with how far the needle is out so that you don't cut through the paper or cutting mat, but with few micro adjustments this has become one of my most coveted craft supplies. You do need an adapter (when I bought my silhouette it came with one) but other than that works so well, and the blades stay sharp for a really long time. I will order again when the time comes!
Canis
Reviewed in the United Kingdom on July 24, 2024
I found reviews and testimonies from people saying this specific one fit their cameo 4 so I went ahead and purchased it, but it doesn't fit in the blue adapted - too wide!
Seth
Reviewed in the United States on April 4, 2024
I thought the Silhouette Cameo 3 was mechanically trash after a decade of awful corners and lines that weren't perfectly straight. I just accepted it. I didn't know how wrong I was. Turns out, the problem was the Silhouette autoblade all along.The CB09 is a fraction of the price, easy to set up, and produces perfect 90deg corners and straight lines. Night and day difference. Best purchase I've made all year. As a bonus, I don't have to listen to the autoblade CLACK CLACK CLACK at the beginning of each job anymore. I hit send and it just... cuts.
Pablo
Reviewed in Mexico on March 21, 2023
Excelente relación precio producto, muy buen filo.
Alisa
Reviewed in the United States on February 4, 2023
The blade holder fit into my Cameo 4 AFTER I used my Dremel and ground down the bar. These holders sometimes fit and sometimes don't. However the blades are sharp and work well so if you have a Dremel, or know someone with a lathe that can do metal, it only takes about 10 min or less to grind it down to fit with the bit I pictured. You can also use a stone bit, it just takes longer.
Arielle Honora
Reviewed in the United States on February 15, 2023
After doing hours upon hours of research, I ordered these blades and holder to fit a Cameo 2 that I was gifted. I am just starting off and am new to all of this so really took a chance with all of the cheap replacement items I ordered on Amazon. I got my Silhouette for free, but there were no blades, cutting mats, or power cord. The CD in the box was outdated. In case someone else is gifted one or finds one cheap, here's what I did:I downloaded the Silhouette software on their official website. This gave me the most up to date app to use all of their machines. I ordered these replacement blades, making sure they said CB09. I ordered this brand specifically because after scouring the web, I was relatively sure that this blade holder would fit the machine without any adjustments. I made sure to check each blade for the angle, as the colors differ from other brands. I then marked the blade bags accordingly. For me, yellow was 30°, red was 45°, and blue was 60°.I carefully put the new 60° blade into the new holder with the springs provided, then adjusted the new holder so that visually it looks exactly the same as the old ratchet blade, adjusted to level 3.All of my other adjustments will now be made in App instead of on the blade for the time being.I popped that blade holder in my machine, and tried it out.This blade works much much better than the manufacturer blade. It cut through cardstock easily without any catching or tears. It also reduced my cut time by like 80%. I was actually yelling with how impressed I was!In my pictures, the V day lettering is done with the previous manufacturer ratchet blade. It took over 10 min to cut the cardstock, caught on the paper, and barely cut other shapes that I could even punch/weed out in one pass.The rough draft of the balloon card is what the new blades cut. The Cameo 2 with these blades cut the whole card out in one pass in less than 120 seconds.I will definitely purchase again when needed.
Wendy
Reviewed in Australia on August 25, 2022
This blade is the best thing I've bought. I bought a lot of different sillouette blades before I heard about this one. Wish I didn't now as i won't be using anything else. Apparently you need to be careful as some of the CB09 don't fit the machine. This particular one didn't have that issue. It is connected to the blue attachment and works so perfectly I bought 3 so I don't have to swap the blades around. Did intricate tiny font to see how the blade stacked up and was perfect.
Michael John
Reviewed in Singapore on March 6, 2021
I'm going to try it out let's see
Maria
Reviewed in Australia on March 28, 2021
The blades are so much better than the original that came with the Cameo.The cuts are so clean, just practice and use your test cut to get the right settings. I leave the blade at the same depth and adjust the pressure.The holder was easy to fit in place of the original.
LY
Reviewed in the United States on December 29, 2019
These blades are awesome!!!!! I ordered them because i needed to cut some very small text in adhesive vinyl with my cameo and the regular cameo blade wasn't doing a great job. I read on the internet that a cb09 blade was good for intricate cuts. Ummm...what???? I had never even heard of that, but if course I found them on Amazon. These come with a holder, blades in 3 different sizes and springs. You assemble them yourself but it is very easy. Mine did not come with instructions, but there are lots of you tube videos that show you how to do it. The blade sizes are 60degree, 45degree and 30degree. You want to select the blade depending on what material/project you are cutting. Mine didn't come labeled but they are color coded (30-yellow, 45-red, 60-blue). They also don't adjust numerically like the cameo blades do, you just have to eyeball it. This has not been hard for me. If you have an old cameo blade, you can set that numerically and then adjust the cb09 blade to look visually the same. The 60degree is good for intricate cuts and thin material like regular adhesive vinyl, so it worked awesome for my small text. The 45degree is good for standard materials like cardstock and thicker vinyl. The 30degree is good for thicker materials like fabric and heavyweight cardstock. After I finished my first project a few months ago, I have used only these blades with my cameo. In my opinion they work way better than the silhouette rachet blade, plus they are a way better value since you get a bunch of each size. Sometimes you may need to adjust the blade size depending on what you are cutting. Recently, i was cutting some adhesive glitter vinyl using the 60degree blade. I was having trouble cutting it all the way through, even after adjusting the blade and cut settings. After a few failed attempts, I finally switched to a 45degree blade and it cut the vinyl like butter!!!!! Seller was great - very responsive and helpful when I inquired about getting an extra blade holder.
Recommended Products