Your cart is empty.
Your cart is empty.Everglass is a short-strand multi-fiber reinforced body repair filler ideal for use on metal for finishing welded seams, rusted metal repairs, and repairing composites for filling holes in SMC and shattered fiberglass. Everglass contains Evercoat ZNX-7 formula that quickly provides superior adhesion to galvanized steel and aluminum much sooner in the repair. This extra high strength and waterproof filler comes with blue cream hardener. Since 1953 Evercoat has recognized the need for high-quality primers and fillers for the automotive aftermarket and began producing other products designed for automotive body repair. Over the years, Evercoat has invested heavily in technology and developed many leading products on the market. We have been first in producing high-build polyester primers, stain-free body fillers, glazing putties, lightweight pourable glazing putties, unique packaging, and time-saving body repair SOPs. We have a wide range of additional products for the domestic and global body repair industry, including adhesives, spray fillers, plastic repair, and ancillary products. Now we lead the industry in the use of “green” technology. Because of our commitment to quality, our unique formulations, and our time-saving SOPs, Evercoat is the number one preferred putty and filler brand in North America. We hold a leading market position in many developed and emerging markets.
Duane C.
Reviewed in the United States on September 8, 2024
used for edges of car door repair, much tougher than regular filler. Buy some hardener when you order Stuff is blue, look for contrasting hardener so you can tell it's mixed well.
Jason Barnes
Reviewed in the United States on September 22, 2024
We use it to fill holes inside refrigerated semi trailer walls.
Carlos Ramirez
Reviewed in the United States on August 17, 2024
Lo utilicé en cuanto me llegó, muy fácil de usar y trabajo muy bien, el día estaba lluvioso y así mismo lo hice y seco super bien, recomendado.
A.k.
Reviewed in the United States on August 16, 2024
All good, good brand to stay with
Graham d.
Reviewed in Canada on November 17, 2023
Would like to get more hardner
Claude N. Bessette
Reviewed in Canada on October 26, 2023
quick delivery
Hector
Reviewed in the United States on February 14, 2020
I used this to seal my boats throughulls. My boat has marine plywood sandwiches by fiberglass on both sides. I replaced all my throughulls and was unhappy with the possibility of water getting to the wood. Two of my throughulls had leaked some water into the wood. Luckily it had bees very little and I only had to remove about an inch around the thrughull to get to good dry wood. This product is easy to mix following the directions, it does set pretty quick so only do a little at a time. I mixed enough for one throughull at a time and it worked out well. It is very easy to work with since it does not run. After drying it is easily made perfect with a file and sandpaper. Now if I happen to get some water past my seal, it can't get into my wood. Will use again.
Daniel Dickout
Reviewed in Canada on November 27, 2020
This is one of the best fiberglass products. Good for small and mid sized repairs making it one of the handiest to have around.
Marc gagnon
Reviewed in Canada on April 9, 2020
Je pensais que s’était un gallons
Customer
Reviewed in Canada on December 29, 2018
its the size of like 73ml its tiny
AS68
Reviewed in the United States on October 2, 2017
I've used the evercoat light body filler and had no problems with it actually it's the best filler I've ever used. I ordered this fiberglass evercoat to use in an area subjected to stress and abuse on my '79 Cherokee Chief. I was replacing the rear fender flares. This was my first time using this product and when I opened it up I was a little stunned to see that it was green and when I tried to stir it and mix it up it was almost like play dough but I got it mixed up and added some hardener to some and applied to the area where I needed it. Was a little tough to spread but I managed to get it in place. It just wasn't as smooth as I would have liked for it to be. After it setup and I started sanding it it sanded find. After getting it sanded smooth I really liked the way it turned out. It didn't look like body filler it looked more like sanded metal and it looks and feels like it will be there for a very long time.I will definitely use it again and I might try to thin it a little with some evercoat 416 putty glaze.
T Markworth
Reviewed in the United States on September 28, 2015
I started off having no idea what I was doing, but knew I needed to get my spoiler attached much more securely and in a more paintable fashion than I previously had it. This stuff sounded like it fit the bill and the result seems to confirm my suspicion. A day later, knocking on my ABS plastic spoiler produces a metallic clank because this body filler is THAT hard when fully dry. Good stuff.Some things worthy of noting. For a job as small as a spoiler, you need to make tiny batches of filler and spread them on quickly. The filler will harden past any hope of applying it in roughly 2 minutes. As long as you have some kind of a hand file, a large variety of sand paper, and you work quickly, you can cover up your messes without much trouble. Actually, I didn't find the filler difficult at all to sand down to hand smooth, but I wasn't exactly targeting show car quality work and I was hacking on it before it was 100% cured. If I weren't working on my daily, I'd have used more filler and taken another hour or two to do the job right.The can SHOULD come with a tube of hardener which is more than sufficient for a small project. If you intend to put a dent in the can, you'd better buy another tube of hardener.
Denard D. Springle IV
Reviewed in the United States on May 17, 2014
Let me first be clear that the Everglass filler itself it top notch and works beautifully. I've relied on this product many times in the past and will continue to use it in the future.The single star rating is simply due to Amazon's lack of proper handling of this material, as evidenced by the damaged cans they continue to ship even though several others have already complained about them, and the lack of hardener being included with these when they ship (they come in the case these cans were originally packaged in). My guess is that they crushed the lot and are still trying to sell them to poor unsuspecting customers. These are damaged goods. Shame on you Amazon.If you need this particular item, my suggestion would be to buy it locally instead of through Amazon since they don't seem to know how to deliver this quality material in a quality way.UPDATE: I returned the dented can that was missing the hardener back to Amazon and indicated both of these as the reason why I was returning this filler. I took a chance and exchanged the item instead of just refunding it as I would have liked to use this filler. While Amazon was quick to ship me out another can - it too is dented and missing the hardener. So, returning to Amazon and purchasing locally after all. Shame.
Recommended Products
$29.34
$ 12 .99 $12.99