Your cart is empty.
Your cart is empty.Product Description
Specification:
* Lumens: 720LM
* Light Color: Cool White (8000K)
* Operating Voltage: 12V DC
* Input Power: 12V * 0.25A
* Size(Approx): 45mm x 25mm (L*W)
Package Included:
* 6 x 5730 24SMD Led Panel Light
* 6 x Festoon Adapters
* 6 x T10 Adapters
* 6 x BA9S Adapters
Feature:
* Ultra bright and durable LED bulbs
* Extremely long lasting life
* Low power consumption and high brightness
* Easy installation, just plug and play
* Universal design suitable to many kinds of cars
Interior Dome Lights
Car Side Door Lights
License Plate Lights
* Note: Please flip the bulb horizontally if it does not light up to match the + and - polarity
* If there’s anything we can help with, please don’t hesitate to leave us a message, we will answer your question in time
Chris Johnson
Reviewed in the United States on March 7, 2025
Fantastic light output. Super bright just what I needed for my project to update my Ram 3500 dim dome lights.
Bradd S.
Reviewed in the United States on June 15, 2024
it worked perfectly. Turned my pickup interior to "bright as day". I did need to finess the leds to fit and work. Installation took about 15 minutes. Worth the money.
William B.
Reviewed in the United States on October 30, 2024
I purchased these to replace the dim bulbs in my 2015 Ram 1500 and when I initially installed them, they were excellent. They provided significantly more interior light than stock and I could finally find items in my back seat at night. Fast forward about 3 months and the failures started. Burned out leds and worse, flickering leds. Now after replacing them several times they are all defective with a very annoying flickering emitting whenever they’re illuminated.
Goodtruck
Reviewed in the United States on May 14, 2023
Lights are bright and are easy to install with the included double sided tape. The 194 adapters were not very well made and tended to cause them to blink on/off. So I wired them in directly and all is good.
Rob from Dundalk
Reviewed in the United States on December 4, 2023
Tested these with another type of similar light and found them to be slightly dimmer.They operate down to 8vdc and up to 13.5 vdc. Do not exceed 14 volts for more than a few seconds or you have trash. They produce 1000 lux at 6" operating on 12 volts. They also stay cooler than the other one I tried. Appear to have a larger heat sink area but could be because these are mounted a little further apart.Recommend these for those DIY people who work on Model buildings. 1 will light up the space well.12-6-23 Cont. Performed experiment with different voltages utilizing different resistances. After multicable test with resistances from 300 ohms to 50 ohms and voltages from 12.2 to 16.2 volts, found that a 50-ohm 1/4-watt resistor worked the best. only knocked down brightness by 25% @ 12.5 volts and don't go to Smoke up to 16.2 volts. My next available is 30 volts and didn't want to smoke another one.I suggest adding 50-ohm resistor to your circuitry to avoid any surge problems that might smoke these.
rexpeper
Reviewed in the United States on November 12, 2023
I got this set for my 2015 Scion XB. These things are fantastically bright I replaced The old bob for the hatch area. The 12 LED is perfect for that rear. Anything bigger it would not fit. I also put them in the domelight this. I did a little bit of modification too I actually saw the 2 of the boards together so I had a total of 24 LED's this gives the perfect amount of light. I almost thought about putting 4 in there. I don't know if they would have fit. But the 2 boards were perfect gives off great light. Now I have Three leftover that I can Give to my friend so that he can put them in his xb and enjoyed the great light inside.If you're wondering I used a JST connector so that the wires were longer than needed to be and I was able to connect the 2 boards. Then sottered them covered with heat shrink. And then that j s t connector plugs into the fastoon connector plug.
AFX Gaming
Reviewed in Canada on January 19, 2022
Used these for interior dome lights and map lights, aswell as an under hood light on my 1999 dodge dakota. They are incredibly easy to install because they come with various little harnesses that should fit into most bulb sockets. Only problem is the cheap quality double sided tape isn't that trustworthy but that's easily fixed by pulling it off and putting gorilla brand double sided tape on, comes in a pack of 6 so I've still got 2 left for other projects/cars if i need them
CS
Reviewed in the United States on November 4, 2021
This item, which is a “group” of multiple tiny LED “bulbs” fastened to a stiff plastic backing, is just what you want if youwould like to have more light within your SUVs cargo area, when you open the rear hatch door or manually turn on thatlight. Installation is relatively easy IF you are mechanically inclined. Here’s the procedure: first gently pry off the plasticlens cover that covers the existing light bulb. Remove that existing bulb. Note how that bulb fastens into the fixture anddepending upon the method then choose the same from the several light connectors that come with the LED item thatis the subject of this review. Attach that to the LED. Then fasten the LED into the overhead socket from which you removedthe old bulb. Peel the paper off of the back side of the LED’s plastic back and stick the LED into the fixture. It should remainwhere you put it if you firmly press it into place. Then carefully replace the plastic light cover into the fixture. You have finishedthe installation. This should give you at least twice the light that you previously had in the cargo area. I have done this to myown two SUVs. It’s well worth the effort.
S'mores-7
Reviewed in the United States on October 22, 2020
Lights worked well. Used them to replace the OEM LEDs that were flickering in my 2017 RAM 2500 and they worked well for this application. Not an OEM fit but a Mod'd look where I mounted them on top of the lens but underneath the button/cover. Problem is the lights get pretty hot and the double stick tape on them (maybe 3M?) didn't cut it when supporting the weight of the LED when inverted so now I have to open up the overhead console again and glue the light panels down.
Michael Kealy
Reviewed in the United Kingdom on January 18, 2020
Very bright and easy to install👍🏻 Really good value
Ivano
Reviewed in Italy on February 18, 2018
Belle, ne ho montate 2 all'interno della plafoniera della fiat punto, e poi altre 2 una a dx e una a sx sul padiglione sopra il divano posteriore, abitacolo illuminato a giorno, adesso si che si vede bene.
Pierluigi
Reviewed in Italy on January 15, 2018
Ottima luce, molto bianca e potente. Senza riflessi azzurri. Istallazione rapida e semplice. No errore canbus. Consigliata per la sostituzione delle normali lampadine.
cheesy78
Reviewed in the United Kingdom on April 14, 2018
Bought for my work van and don’t work properly and I cancelled them and still sent them to me waste of money
Recommended Products