Your cart is empty.
Your cart is empty.Product Description
If you are considering replacing your surf traction pad and don't want to spend too much? HZCHIONE EVA foam sheets features excellent grip, water resistance, and shock absorption. It's very suitable for making unique surfboard grip pads!
EVA Foam Boat Flooring Decking Sheet
New Grid Design - Good Cushioning
- The unique grid pattern design can make your surfboard more fashionable and beautiful!
- Unleash your design talent! It's easy to cut into any shapes that you want. You can pair it with different-colored anti-slip pads for cutting and splicing. Enjoy the fun of DIY to the fullest!
- Premium soft boat decking foam provides great water resistance and UV resistance.
- Comfy to walk on barefoot. It doesn't tire your feet and allows you to enjoy the fun of exercise fully.
Strong Adhesive Backing
- Not easy to peel off
- Not easily shrunk or deformed
Waterproof & Moisture-proof
- Not absorb water
- Easy to clean. Can be cleaned with a damp cloth
The non-slip surface gives you a good grip on the surfboard. No need to worry about wet feet making you fall. Even it provides great grip for your pets!
Widely Application
Not only for surfboard, but also for boat deck, marine deck, kayak, jon boat, yacht, pontoon, swim platform, stair steps, RV ect
Customer
Reviewed in the United States on March 2, 2025
I put this vertically on a plastic surface and had no issues with it sticking. Also I was able to pull it out and move it slightly to get it just right without issue. I did have to wait a while to get it to unroll when I got it.
Chelsea F.
Reviewed in the United States on March 12, 2025
Nice foam! I don’t use for intended use but I used it for one wheel grip tape. Quality seems great so far and cheaper than other options. Just trim to whatever you would like! Would recommend for multiple uses!
Wilderness Family
Reviewed in the United States on March 12, 2025
I got this for the powerboat I’ve been refurbishing. I removed the old carpet on the side walls and gunwales and replaced it with faux foam flooring that looks like planks. However, on the walls near the folding seats, I found I wanted a little extra padding to lean against, so got this.I cut it to the size I wanted, outlined it against the other foam, and cut out the sections so this padding could be glued directly to the plywood. It comes with strong adhesive on the back and it’s sticking well.It feels comfortable and looks great!
Veronica Marie
Reviewed in the United States on February 8, 2025
The media could not be loaded.
Greg Z.
Reviewed in the United States on February 6, 2025
This is a 3/16” thick, dense, closed cell foam mat with a square patterned cut top. The peel and stick adhesive backing is good. This product would make decent anti slip matting for a fiberglass boat deck or boat step. It could even be used to protect the top of a rear car bumper.or on stair steps. However, the listing has it recommended for applications beyond it’s ability. “Super sticky and tons of traction” is not an accurate description for this product. If you want a mat for a surfboard or skateboard, you are going to want better grip than this product provides. I ride a wakeskate, and I can say there is no way this mat could provide the grip needed for water sports. It’s not a bad product for what it is, but I have to downrate because it can’t do what is advertised.
Remington
Reviewed in the United States on February 5, 2025
First off, I don't own a boat. I do, however, own a subwoofer box that I think would look great covered in boat flooring. I own an older Jeep Wrangler and I have all sorts of customization in it. Audio system, LED pods, whips, just all sorts of silly things. My subwoofer box is just primed at the moment, but instead of painting I wanted something that would add some impact resistance. I decided to go with boat flooring.This arrived in a plain box and contains just the flooring material in a roll.It's a shame they have to roll this stuff, though I know any other packing method would have its faults. Still, to use this stuff you want to lay it out in direct sunlight or even hit it with a hair dryer or carefully with a heat gun. Heat will allow this stuff to flatten. If you don't flatten it this stuff will want to curl when you apply it.Installation is pretty easy. Cut to the size/shape you want. Pull the paper backing from the flooring to reveal the adhesive layer, press the adhesive layer against the surface, press down. Done.This is decent flooring. It's thinner than a lot that I've tried, which depending on your objectives may be a benefit. It'll be better if you have tight tolerances like in my application of protecting a subwoofer box, but probably not as soft as a thicker flooring.Overall this is decent stuff. I would get thicker if I wanted to use this as actual flooring, but for my purposes it works.
Moximum
Reviewed in the United States on February 3, 2025
Looks good. Useful size for the bottom of a kayak. Traction on it feels good.
UK FAN
Reviewed in the United States on February 10, 2025
Good EVA Foam Boat Flooring Decking Sheet. High-quality EVA foam decking sheet. Has good anti-slip performance. It feels grippy and soft. Very comfortable to rest your feet on after you install it in your boat. It is also waterproof, sun-resistant, and doesn't easily shrink or deform. Easy to cut and install, and can be freely cut into any size/shape. The backing adhesive is extremely sticky and adheres well. Like the color Dark Grey that we got. The price was a bit steep for what little bit of flooring you get.
Recommended Products