Your cart is empty.
Your cart is empty.Product Description
- Ergonomic Design Extend the desktop horizontally, fully support the arms to relax the upper limbs and improve working conditions. Improve the design many times to find the best ergonomic solution.
Improve wrist support
Strong load-bearing capacity
Multiple ways to use
Horizontal alignment desk extender
- Fabulous space Installation You can fold it down when you don't need to use it, saving space. When used at work, you can place more items such as keyboard, notebook, mouse, etc. to increase the use space.
Uncompatible desktop types
- Better Compatibility This extension board is better compatible with common right-angle office desktops than similar products on the market. Whether it is the side or front of the desk, it can be perfectly connected.
- Easy Installation According to the installation instructions, quick installation. The whole process only takes 5 minutes, which is convenient. Non-hole installation ensures that the desktop is intact.
specification and Various Choices
- Four colors: carbon fiber texture, maple, white, walnut
- Material: carbon fiber texture is made of high-density board, the other three colors are solid wood.
- Product size: 64cm*24cm*10.7cm or 75cm*24cm*10.7cm
- Item Weight: 6.6lb or 7.7lb
If the model is not shown, it is not yet available, so stay tuned.
Robert Carmines
Reviewed in the United States on January 18, 2025
Easy to install, works great! I wanted to extend my mouse past the front of m y new standing desk so that I didn't have to reach so much for it. It works perfectly, folds out of the way and is extremely stable! I got the smaller one that is only about 5 or 6 inches wide and about 11.5 inches long. Just the right size. Attaches so it is flush with the desktop.
Raoul K
Reviewed in the United States on September 30, 2024
You will need a Philips screw driver to assemble the desk extender, but it comes with cotton gloves for protection, and pilot holes marks where the metal arms attach to the wooden piece. Attaching the extender to the desk is easy. I also really like the mechanism for folding the desk down. Everything about this product works great, and is very sturdy.
Studio touraine poitou
Reviewed in France on June 27, 2024
Utilisation pour bureau
jwin
Reviewed in the United States on November 27, 2024
Unfortunately, this item is a great idea that just isn't well made at all. I used it once a day to attach to a small table where I eat my evening meal, but within a month (or at least right after the return window closed), it completely came apart). I didn't use it harshly, nor did I put anything heavy on it, but it just died. Don't spend the $ or make your own.
Kirk
Reviewed in the United States on January 8, 2024
I prefer to use a wood to take for a desk and this is a great way to add space for my coffee cup and water bottle.It folds up and down so it's not in the way if I'm not using it.It's very sturdy so I'm not worried about it choosing.I may get another larger model to extend my table/desk length when I work on paperwork to give me more room. Then I can fold it down when I want to easily access supplies or my shredder.These are built well and easy to attach. They come with clamps and have levers to fold them down.
Eggs
Reviewed in Australia on January 4, 2024
This attachment has been serving us well for some months now. Solid design that locks into place and folds away easily.
Zen
Reviewed in the United Kingdom on April 6, 2024
I needed a desk extender for my desk-trolley, on which to house my mini-pc brick and spectacle stand, and this was the only one I could find that matched my desk-trolley perfectly. There were some reviews saying the quality was poor, but I took a a chance.I needn't have worried, the quality was excellent.Putting it together was a bit fiddly, but this is how I managed to do it: leave off the support arms and screw the self-tapping screws into the board until they are quarter of the way in, then unscrew them. Lay the support arm on the board and drop the screws into the holes they'd made. You can now screw them in until fully screwed. If you don't do this, the screws will want to fall over when you try to screw them in.
Michael Combs
Reviewed in the United States on August 19, 2023
Desk Extender Tray, 21.7"x9.5"— The brackets that hold this up are sturdy, fold and open easily, and the shelf has a nice finish with rounded edges. Attaching the shelf to the brackets is easy because the holes are pre-drilled. Attaching the screw-in clamp to the bracket is difficult unless you first spray the screw with WD-40, screw it in, take it out and spray again, then put it all the way through. Without the WD-40 I think I would have stripped the screws. It came with gloves, and they were useful to wipe up the excess WD-40. Maybe they planned it that way?If you want a nice keyboard shelf, this is worth the money. It's a quality product.
Jose Varela Pereira
Reviewed in Spain on January 17, 2023
Me ha resuelto el problema de una mesa estrecha para colocar un teclado. Las sujeciones se ven firmes. Buena sensación de calidad.
Peter
Reviewed in the United States on May 20, 2022
It's a lot less sturdy than I thought it would be, and by that I don't mean that it's flimsy and will fall apart, I mean that the brackets themselves have some back and forth play in them, so it will not be dead still after it's installed, it can jiggle and wobble, however it does do the job and can hold weight pretty well - I can comfortably rest my arms on it while typing and using a mouse (I'm 215lbs), and I rest them on the EDGE, no less, which of course applies even more torque, so the fact that it holds is impressive, but I wouldn't apply much more weight than that.Assembly is slightly a pain - you have to line up small holes and then get the screws in there between all the metal which kind of gets in the way of you screwing it in, but that's all there is to it. There are 4 marked holes and 2 unmarked holes, but they included 9 screws for some reason. I did use all 6 available holes (including unmarked ones) which was tricky but will help keep it more stable.Installation is a piece of cake - just clamps you have to screw in and that's it. I did notice it was sloping a bit too much INTO the desk, so I had to loosen the clamps, push it to slope more towards the outside, and then clamp it down again. It didn't change the slope too much, but enough so it wouldn't be bothersome to me.Last thing I will say is while I appreciate that it can fold out of the way, the extension kind of stays in the way so you can't put your fee under the desk when it's folded down, so the only use I can see for it is if your desk is near a path you need to use and the extension kind of blocks it. I feel like what they could have done instead which would have been more useful to most people is allow us to change the slope to different levels rather than just having 2 settings of up and folded.Overall, this product made it much more comfortable for me to work at my shallow desk - could it have been better? Yes, but it does the job very well and I'm much happier with it than without it.
Robert L.
Reviewed in the United States on November 30, 2022
Using it to hold a small MIDI controller. Solid enough for what I use it for but don’t use it for any serious weight. Arms can rest on it ok if not leaning in to it too much. Good enough for what I need it for. Super easy to put together, but I’d advise the mfr to set up for 8 screws so it’s super sturdy. The clamps and mechanism are very good so if the shelf attached more securely, this thing would be a rock. So, I recommend it for light duty. Computer or music keyboard and such.
Marco
Reviewed in Germany on October 30, 2022
Hallo, ich nutze diese „Verlängerung“ auf einer s deren Art . Mein Schreibtisch ist 90cm tief und ich nutze 2 Monitore , ich habe die Platte hinter dem Schreibtisch als Verlängerung damit der pc weiter nach hinten gestellt werden kann.Die Fixierung ist einfach und gut!Es hält einiges an Gewicht aus bringt absolut den gewünschten Effekt der Verlängerung.
Recommended Products