EDC Fidget Sliders Open Armor Spinning TopFidget Toys Stress Relief for Adults Magnetic Metal

Just received this a few hours ago. Here's the good and the bad so far:PROS- It just looks freaking cool! The 6 large and 6 small moveable "armor" panels are sweet and the "03" text, notches and triangle designs, etc are nice and crisp.- Love the gray color; any shinier and IMO it would look cheap, any darker and you would visually lose some cool design details.- Love the weight; weighed it 3 times on my kitchen food scale: 148 grams, that's 5.22 oz (feels like 7-8 oz to me but I trust the scale). You feel like you got your money's worth; a toy that should last a long time...."plastic" it is not!- Spins a long time; longest so far is 2 mins 30 secs and 2 minute spins are easily achieved repeatedly if you hold it with one hand and spin it with the other. NOTE: It spins significantly longer if you let it spin holding it on its side, ie, keep the center AXLE AXIS pointed vertical/straight up and down and NOT horizontal/parallel to the floor. No idea why that matters but it seems to.- When spinning fast enough the 12 armor panels automatically flip outward and significantly increases the size of the toy; again, giving the feeling of a nice bang for your buck.- When spinning it is almost entirely silent. I estimate the slight bearing noise goes down to zero after 15-20 seconds of it spinning.- When spinning, it's a nice tactile feeling on your finger if you gently touch the toy's armor panels and slow it down or stop it completely.- If you hold it in your hand as you spin it, as the spinner slows down the 12 armor panels usually retract automatically due to the lower centrifugal force and the force of the small magnets in the 12 panels. If they don't automatically retract when the spinning stops, if you touch one of the 12 armor panels they all quickly retract with a nice sound to it like small, metal dominos in a row quickly falling down. Who doesn't like the sound of dominos falling down?- Well packaged; it comes in a small, soft foam envelope which is placed inside a slightly larger zip-close plastic pouch and the whole thing was then mailed in an Amazon bubble mailing pouch.CONS- It's a little smaller than I was hoping; I measured it carefully and it's 1 15/16" across (diameter) with the 12 armor panels in the fully closed position. IMO it would be even cooler if it were about 2 1/4" - 2 1/2" in diameter in the closed position. In the fully open position it measures 2 7/8" across. Measured from the front it is 3/4" wide at the center axle; that's a good thickness/width IMO....gives it a nice, solid feel.- The center axle assembly is incredibly loose; it has ~1/16" of slop/lateral movement in it when it's "not" spinning. This is so large of a movement it must be intended but I have no idea why they settle for that tolerance. Again, however, this thing regularly spins for 2 minutes even with that center axle sloppiness so does this even matter? NOTE: There are 3 separate, spinning/rotating assemblies in this toy; the center axle, a thin/narrow second ring (this is the ring that has the 8 short, separate arcs with a shallow notch in the center of each arc) and the 3rd (outer) assembly with the 12 armor panels. When the toy is spinning the center axle sloppiness almost entirely disappears and instead there is lateral slop/runout between the 2nd and 3rd spinning assemblies (listed above) of ~1/64".....you can barely see it but it's there. Runout matters for unpowered spinning assemblies because it dissipates the energy of the spinning body quicker, ie, the less runout you have the longer the toy will spin.- I haven't yet figured out how to hold it and "flip it" with the same hand and get it to spin fast enough to automatically extend the 12 armor panels like I've seen in a few online videos but it seems to me if you don't have a tight grip on the center axle you may launch it across the room and ruin this thing; it's heavy but probably easily damaged by dropping it.KUDOS: I asked the seller (T-Conceal) why this sells for $39.99 and others exactly like this sell for $179 and I was told, promptly, the difference is quality in terms of tighter part tolerances. They said this version is made using metal parts cast from a mold and the $179 version is made using CNC machining to fabricate the parts and they admitted the $179 version would be a better, more premier experience. True, but you're also going to pay heavily for it. That kind of honesty is incredibly rare online today and I applaud them for it.SUMMARY: If you are struggling to put food on your table, maybe $39.99 is better spent on other things like housing or food but if you have some fun money in your wallet, this toy is pretty danged cool. Highly recommended!PS - No, T-Conceal didn't send me this toy for free or even offer it at a reduced price, but I like detailed reviews so you know "exactly" what you're getting. Cheers!

I read the previous reviews about the parts falling off of it during use and I purchased it anyways. previous reviews were true. During use, one of the magnets came off and several set screws were loose. What I actually did was disassemble it. I put a dot of super glue on the magnets ensuring they never come out. I took out all the screws and put loktite on them. After I put it back together, it's great to have and use. I say it's a good purchase even after putting a little love into it.

It was awesome for a month or son, then the magnets started falling out of their holes, and the screws started falling out. Bad manufacturing... not assembled with quality materials...

I got it for my daughter....cause her happiness matters more then my idea that fidget spinners are dumb....I'm starting to play with it too! This thing it very entertaining lol

The media could not be loaded.

Bought it upon seeing videos on it. Looked really cool and felt really good for the first day I had it. Then magnets started falling off. Having to crazy glue those back in is a hassle. Then a screw that holds one of the flaps on the main spinner fell out somewhere. Overall; too many points of failure. Spend your money elsewhere.

Well made! 19 yo son loves it. Out of his fidget collection, this is his fave.

The weight and action on the spinner is very nice, it is quite enjoyable to fidget with. I found it to be a bit loose and sloppy to start with. In the process of trying to make it function smoothly I lost a few of the screws holding the arms on. They are quite small and it was a small miracle that I found them. It takes jewelers tools to tighten up the screws with a standard screwdriver and a very small Allen wrench. I have it all tuned up and all parts accounted for so it works well now. Just be prepared to tune it up before you start spinning it or parts will disappear.