Your cart is empty.
Your cart is empty.Our Dual-Spindle Doweling Jointer is a perfect tool for you if you want strong and accurate joints for your furniture, cabinetry, or small construction. In order to join two or more pieces of wood together, dowels are inserted into both pieces of wood being joined which provides an overall stronger joint than a biscuit joint or glueing would. Someone says mortise and tenon joints or domino joints are stronger, double 10mm or 12mm dowel joints have similar performance to the domino joints with an attractive cost. This wood jointer can join wood wardrobes, cabinets, frames, and many types of furniture quickly with minimal effort. This unit comes standard with two 8mm and two 6mm bits.
49ers
Reviewed in the United States on June 30, 2024
No issue
Scott
Reviewed in the United States on March 30, 2024
I used these bits yesterday with my dual spindle jointer. Nice, sharp bits, accurate size, and they worked great.I don't know what else you need to know. These worked great for me, and I imagine they will continue to do so for a while.
funbear
Reviewed in the United States on March 19, 2024
carbide realllll matters, it lasts, so glad its used hereas the doweling jig gets heavy use, but nothing last foreverand sometimes u want a cleaner hole...but for the price point, these things are superbglad to read they can be used in a drill chuck as well, never tried that yetanother reviewer said these fit in Mafel also, if so, that was smart...impressive brand, recommended, 4.5 stars
buddha-dog
Reviewed in the United States on February 8, 2024
A carbide cutting edge is the hot ticket when cutting manufactured-wood materials like MDF, masonite, particleboard and even plywood. These are a durable alternative for making holes in those materials.These have a brazed carbide tip with a clean four-facet grind leaving a brad-point in the center. The cutting lips are slightly hollow-ground producing a bit of a spur at the edge to sever fibers and reduce tearout. The cutting-lip edges are chamfered to also contribute to a clean-edged hole.I like these and they save subjecting my brad-point bits to abrasive materials. There is a flat on the shank which I expect registers them in the doweling tool they're intended for, but you can chuck them up in a regular drill chuck as long as you avoid that flat with any of the three chuck jaws, which is how I use them.Overall, I'd do it again and recommend. The price of $15 each (two for $30) seems a good value to me.
A. Galt
Reviewed in the United States on February 5, 2024
Perhaps I'm not very smart, but reading the description, I thought these would be sufficient to make doweling joints. I got these without realizing that I needed a $125 power tool with which to use them. As far as I can tell, they're useless to me. Do they work well? Maybe? We should all strive for better written communication.
Scott
Reviewed in the United States on January 23, 2024
I have a set of smaller dowel jointing drill bits but needed some with a larger diameter for a project I have been working on, and these are perfect. They fit perfectly and securely into to my dual spindle dowel jig and performed very well.They come in protective sleeves, which is extremely nice to keep them protected, but more importantly, keep me and my son protected. He is just learning to properly handle sharp tools. The shafts are also secured in a hard plastic holder. This makes them easy to handle and move around safely, but they are difficult to pull out to use. I had to tightly grab the spiral part of the bit, which is not sharpened, and use some force to pull them out of the socket they are in. I really didn't like the amount of force I had to use. A person without a lot of hand and finger strength might have some difficulty doing this.The actual cutters are very sharp and do an excellent job. However, just like any other sharp tool, these could easily cut the skin if handled inappropriately.If looking for drill bits for dual dowel drilling, you can't go wrong with this set.
Zubicki Handmade
Reviewed in the United States on April 18, 2024
I wish I could afford a Festool domino jointer, but I can't. I can afford the Igoo doweling jointer, and It is awesome. I like that I can change out bits for larger / stronger dowels depending on the project. These bits are excellent quality, they fit perfect in the machine and cut a super clean hole with ZERO tear out. These are a great accessory to have with your doweling jointer.
Akeela W
Reviewed in the United States on April 10, 2024
These arrived and though I haven’t used it yet, I have been observing how sturdy their construction seems. These are great for dowels in furniture. Highly recommend these.
Recommended Products
