Dryer Vent Hose Easy-to-Install 4 Inch Duct 6.56-Feet Heavy-Duty Duct with 2 Clamps – 4 Layer PVC and Aluminum Flexible Duct for Heating Cooling Ventilation and Exhaust

Just. A couple things that could be improved, , I needed a connector for a 4” hose and it was just a bit to small and when you extended the hose it would have been nice if you could shrink it back.

I recently purchased a drier and had to buy the vent hose separately. It was my first time purchasing this item, so I didn't realize the importance of getting a heavy duty one. The cheap one I originally bought lasted about 4 months before it started getting holes in it. I like that this product told you it was heavy duty as drier dummies like me would not know otherwise. The product is compact and heavy duty and super easy to install. Thank you for making this description so clear.

Working great on my diesel heater and very durable. The real pros for me with this hose is the exterior coating which durable so far and also makes it very easy to rinse off or clean for when I need to use my heater outside which can cause dirt to get on the hose. The second pro is that it collapses back down very easily for storage which is important in my case since I use it with a portable diesel heater and it never stays setup long term and is always getting packed away. Good value overall.

I purchased this to replace an old silver hose. This one has made a big difference. It was quick and easy to instal. The quality is much better than the single layer ones in the store. The previous hose split and broke when attached-this hose was much stronger and had no issues-much better quality!

Es delgada. Al instalarla tuvo una pequeña rasgadura, pero hasta ahora se comporta bien. Pero definitivamente NO es para uso rudo. Para extractores de polvo ligero está muy bien pero no creo que dure mucho en mi caso xq se extraen partículas y restos duros, pienso que en breve se romperá. Pero por el precio y si no se usa de manera exigente parece buen producto. Si se requiere uso rudo no es la opción.

Muy funcional la manguera

Ok, first though not technically a feature, the packaging was so well designed, that this vent hose was not creased, dented or out of alignment on delivery. The hose is built like a slinky, which helps, but it was in a tight fitting, tall box and then in a plastic sleeve, with the hose clamps slipped over the hose but protected from being torn by them. Nice packing job!#1 The Best A+ No. 1 feature---the ends of the hose are reinforced with thick rings that make installation on the dryer pipe (which is sort of short and jagged) and onto whatever connection you have venting to the outside, incredibly easy. If you can see it in the picture, the reinforced part of the coating is thick enough you can fit the clamp ring over it and still have extra room. The extra thickness gives you room to fit it over the dryer pipe and then get the clamp over all of it, ensuring that the hose won't slip off as you put the dryer back in position. And it doesn’t look like it will start to lose its integrity when it comes time to remove the hose for cleaning. I anticipate the ends of the hose holding up.The reinforced bits are something that should be on every vent hose.Yes, most foil vent hoses have some bit of thickening or little ring at the end, but it’s not as substantial and it’s usually short and the foil tears away from it quite easily. This is a much better design.#2 The Accordion style pleats allow the rings of this hose to compress back on themselves, like a Slinky, so even at six feet you don't have to shorten the hose. Cutting hoses often messes up the structure and then the alignment of the hose goes off, and each time you have to detach or reattach the hose it gets harder to manage.#3 The substantial plastic coating on this hose really protects the internal foil part, so that it doesn't get torn when installing or moving it around when you move the dryer to clean.#4 Substantial clamp rings, packaged (again with the packaging!) so that they were not squashed or bent in transit and they didn’t tear the hose.I have learned from my past dryer vent hose mistakes. No more rigid metal hoses that get squashed and if you have to size them down, create structural problems and razor sharp edges. No more paper thin foil or plastic hoses that are easily torn and don't have the larger, reinforced ends.I have no complaints. This is a fantastic dryer hose, and I was motivated to get online and write a review right after installing it, because I hate working on the dryer and this was so easy it wasn't even workIf the manufacturer wanted to make the product even better they might substitute the clamp rings for the type with the little turn- key built in (I took one off another unit) then you wouldn't even need the one tool (the screwdriver) that's required to tighten the clamp rings. And maybe they could offer white or grey as color options. But that’s just picking nits.Great product!

Me fue muy util este tubo espero me dure mucho

I bought this to allow me to move my dryer further from the dryer vent in the wall, and was definitely impressed with the feel and quality of this duct hose compared to the one that came with my dryer.One thing to note is that since the duct comes fully compressed, there is some resistance when stretched to its full length as the duct tries to snap back to the compressed state, so it is difficult to get the 10ft hose to stay 10ft long.I needed about 8-9 feet usable length, and while the 10ft version I am using fits, it is stretched pretty tight, so it would definitely have been an easier fit if I'd have gotten one a few feet longer.All in all, great duct hose and absolutely an improvement over my old one.