Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #24,751 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
- #98 in Power Converters
Product Description
DROK AC to DC Power Supply Converter --- Enjoy Life Enjoy DIY
DROK AC to DC Power Supply Converter Adjustable, High Quality, Easy to Use
- Parameters:
- Input voltage: AC 110-220V ± 15%
- Output: DC 0-48V 10A
- Rated power: 480W
- Product Dimension: 215*115*50mm (length*width*height)
- Wiring:
- 〨: Ground
- N: Null wire
- L: Live wire
- V+: DC output +
- V-: DC output -
- Instructions for use:
- The current is unregulated and maximum is 10A. The actual current is determined by load.
- Any devices below 10A current can use this product. Any devices above 10A current cannot use this product.
Design Details
LED Digital Display
Clear LED display, esay to read.
High stability and accuracy.
Output Voltage Adjustment Knob
DC 0-48V output voltage, which can be adjustable any time.
Adjust the voltage clockwise to increase;
Adjust the voltage counterclockwise to decrease.
Smart Cooling Fan
Once the power converter gets hot, the cooling fan will automatically work to cool it down.
Default Input 220V
NOTE:
The power supply is default 220V, before using, please select the input voltage 110V/220V according to your local voltage, to avoid being damaged, switch is at the right side of it.
Wide Application
metrology dufus
Reviewed in the United States on September 14, 2024
I purchased the 8Amp 60Vdc (480W) variable voltage/current version.Originally bought this as a bench supply with variable high voltage DC and current limit control.As an experiment, I tried using this to power an upscale treadmill with bad electronics.Its motor was okay, so I needed about 30Vdc at a little more than 8Amps, so it was a gamble.It did not have quite enough current to drive a 2.5 Hp brush DC motor at >crawl speed, but that is not its bad. It was a calculated failure for this application.I have a few other DROK products and they are all nicely functional and high quality construction.I have no complaints and would buy again.One thing I suspect with this particular supply, is its slow response to load current transients, such as would be the case with a treadmill -where footfalls produce velocity changes in the belt and motor drive that in turn induce surges in load and thus changing current draw as the load varies.The supply's display (tested to be accurate) indicated a current hitting >9Amp peaks and could not deliver sufficiently to maintain belt speed.Again, not its bad, just not enough headroom for the intended application.Note that testing at these extremes caused NO damage to the supply. The duty cycle was low enough that the fan did come on but only slow and the case became only warm to the touch.Instead, I purchased the variable 24Vdc, fixed 20Amp (480W) version, which works perfectly at crawl (16Vdc) to brisk walk (27Vdc) speed. Funny thing about some of these supplies is the DROK brand looks the same as the other odd-named (non-DROK?) supplies offered on Amazon. I suspect these may be made in the same factory despite differing brand names.
Galo R.
Reviewed in Mexico on July 20, 2024
Excelente para prácticas de electrónica en casa
RoweReviews
Reviewed in the United States on June 21, 2024
The DROK 48V Power Supply is a high-quality, DC power supply designed to provide a stable and reliable power source for various applications. It features a compact and robust design, making it ideal for use in both industrial and laboratory settings.**Key Features:*** **Wide Output Range:** It offers a wide output range of 0-48V, allowing it to power a wide range of devices.* **High Power Capacity:** With a maximum power output of 240W, it can handle demanding applications requiring significant power.* **Stable and Precise Output:** The power supply provides a highly stable and precise output voltage, ensuring that connected devices receive a consistent power supply.* **Adjustable Output Current:** The output current can be adjusted from 0-5A, giving users flexibility in powering devices with different power requirements.* **Multiple Protection Features:** It incorporates multiple protection features, including overcurrent, short-circuit, and overvoltage protection, ensuring the safety of connected devices.* **Compact and Durable Design:** The compact and lightweight design makes it easy to store and transport. Its rugged construction ensures durability and long-term performance.**Applications:**The DROK 48V Power Supply finds applications in a wide range of areas, including:* Laboratory equipment and testing* Industrial automation and control* Battery charging* Medical equipment* Audio amplifiers* Power tools**User Experience:**Users have consistently raved about the DROK 48V Power Supply's performance and reliability. It is easy to set up and use, with intuitive controls that allow for precise voltage and current adjustments. The stable output and multiple protection features provide peace of mind during operation.**Pros:*** Stable and precise output* Adjustable output current* Multiple protection features* Compact and durable design* Easy to use and set up**Cons:*** Some users may find the 5A maximum output current limiting for certain high-power applications.* The lack of a digital display for voltage and current readings may be a minor inconvenience for some users.**Conclusion:**The DROK 48V Power Supply is an excellent choice for anyone requiring a reliable and efficient power source for their applications. Its wide output range, high power capacity, and comprehensive protection features make it a versatile and dependable solution. Its compact and durable design ensures ease of use and longevity. Overall, the DROK 48V Power Supply is highly recommended for both industrial and laboratory use.
Gary
Reviewed in Canada on May 20, 2024
Fuse may be under rated for 115vac setting. Has 5 amp fuse inside. Works ok for 230vac setting.
hector
Reviewed in Mexico on October 25, 2024
Bueno
Randy
Reviewed in the United States on January 28, 2024
I am using this Drok 115VAC to 24V 20A variable power supply, along with a YaeTek 24V DC 350W Permanent Magnet Electric Motor, to drive my Taig Micro II lathe. Considering this whole kit cost about $80 I'm very happy with the result. While not perfect, the value is so high I have to give it 5 stars.If you've been thinking about one of these motors for your micro lathe I say, go ahead! If you are running the 115VAC Marathon motor that Taig sells, then you know about that motor. It's OK, but the speed range with the 4 step pullies is 430 RPM to 1725 RPM, pretty high for larger parts. And it's big, heavy, and kind of brutish - there is no way you need that much power, nor can it even be transmitted with the stock belt.This DC motor setup runs well down to about 5 volts/570 RPM, which is a lathe speed of 140 RPM. It will go a lot slower, but it sounds a bit notchy. It's happier above 5 volts, and I usually have it set about 16 Volts, which makes a lathe speed of 450 RPM to 1800 RPM. The power supply goes to 28 volts and the motor is spinning at 3200 RPM.This PS has been flawless in this application. It is the voltage regulated only model. Using a "Kilowatt" meter I'm seeing up to about 120 watts in my application. So, about 5A at 24V. The PS seems perfectly happy, and the fan has never turned on. Judging from the motor whine while running the lathe there is a very minor variation in RPM with no load, just a few RPM or small fraction of a percent speed. Under cutting load I've not noticed any significant speed change - it does sound like the system is working harder but that's normal.The motor has plenty of torque for this application. At 7V I have no trouble machining 2" diameter aluminum at a no drama SFM. Once again, the belt is the limitation.The only negative for me is the motor is kind of loud. It makes an ever rising pitch and volume whine as RPM increases. I only use this lathe for occasional small parts, so the noise doesn't matter. If you are doing production, it might get tiresome.Who knows how long it will last. Considering it's intended use as a scooter motor I'm hoping with this very light lathe duty it will last forever.
Jean L.
Reviewed in Canada on May 25, 2023
bien satifais
Customer
Reviewed in Singapore on July 20, 2022
Stable output voltage
Recommended Products