Your cart is empty.
Your cart is empty.The Dremel Multi-Max MM35 features 3.5 Amp of power to easily tackle the toughest applications. The tool-less innovative design for Quick and secure accessory Change solves the pain point of needing a wrench to perform the same operation. The Extra-wide 3.2-Degree angle of oscillation delivers fast and precise cuts. The variable speed 10, 000-21, 000 OPM allows for optimal performance and control with a variety of materials. The provided soft bag is a great value added to store tool and accessories.
rick
Reviewed in the United States on July 28, 2024
amazing tool, has been extremely helpful, the only issue I have with it is the on/off switch is so hard to move that I have actually had to unplug it and use two thumps to move it from the on position to off. Used it this week end to cut out 36 in long 2 inch thick threshold.
Michael, son of Lester
Reviewed in Canada on July 15, 2024
I had been looking at buying an oscillating tool for a while, but the price was always just out of reach for a good one. After finding this product on Amazon, I took a look at other sights where it was advertised. The price was almost double wherever I looked. Add the extra set of blade that it comes with, and it is a heck of a bargain. I've used the oscillating tool to help me with replacing deck boards, and it saved a lot of time. I've also used it on drywall, and it is fantastic. Not only that, but I highly recommend getting one of these if you have a long honey-do list like I do.
Snoopy
Reviewed in the United States on July 10, 2024
Worked well to cut the bottom of door jams and vinyl plank flooring. I like the variable speeds.
IT PM
Reviewed in the United States on May 14, 2024
The tool came ahead of the planned delivery time. It is incredibly easy to use and is very powerful. I especially like the ease of replacing the blades and the variable speed. It made quick work of a couple of projects that would have otherwise taken most of a day to complete.Get one if one don't have one already.
Ana Mendes
Reviewed in the United States on March 20, 2024
The media could not be loaded.
Glitterglow
Reviewed in Canada on December 3, 2024
Bought it to finish off garden planters but ended up not using it. I’m not sorry though Dremel products have always been reliable and well made.
Norbert Ortiz
Reviewed in the United States on January 29, 2024
Mostly using to cut nails and screws out of reclaimed wood for projects right now. It has also come in handy for some wood cuts where other tools wouldn’t fit. Works great, just make sure to upgrade from the standard metal blades to the carbide blade when doing repeated nail/screw cutting as the standard blades wear quickly. Great tool with a multitude of uses.
Nsf
Reviewed in Mexico on April 21, 2024
Esta herramienta, es muy útil para hacer cortes preciosos en madera, no pienso usarlo con metales ferrosos, creo que su principal uso sería en trabajos delicados.
Greg
Reviewed in Canada on April 10, 2023
The Dremel oscillating tool was a great companion tool ( to my rotary tool ) for grout removal in our bathroom. It was very helpful in running a straighter line between the tiles than the rotary tool which needed greater vigilance and care so as not to cut into tiles.The set speeds of various increasing RPMs is an excellent feature . No need to keep finger on a throttle switch for a certain RPM like some other brands which can be tiresome. This would be a deal breaker for me if this feature was not available with the Dremel tool.The oscillating blade also allowed for getting into tight areas that a rotary bit cannot reached properly.The tool came with an assortment of cutting blades which I have not use yet.Lots of power and ran effortlessly during removal of the tile grout. Barely felt any warmth from tool during operation. Quality built and fits snugly & comfortably in my hands.Highly recommend to buy if looking for a reliable tool.
Customer
Reviewed in Canada on July 17, 2021
The adapter that comes with the unit does not fit my particular blades but I suspect tgat if I really tightened down the bolt, it would squeeze it enough to hold the blade.
Gene P. Louie
Reviewed in the United States on April 5, 2020
Here are the "good" and "bad" on this product...ADVANTAGES.1. QUALITY: Dremel is known for their oscillating tools. This model worked well, especially sanding. For example, my garage/basement door was sticking due to warp wood on the frame. The affected area was 2"x4'. Rubber stripping was in the way, as well as door jam and lock.I was able to maneuver around the obstructions without any problems. The Dremel reduced the wood to proper size. In the two hours, the vibration was constant and consistent. The tool did not heat up or strained..2. PRICE: The Dremel was in the lower range for professional grade tools. I paid $65 for a customer return - LIKE NEW condition. This was cheaper than a comparable powered $160 Dewalt, $200 Makita, or a $320 Bosch..3. FEATURES: It had everything needed: cutter, scraper, and sander with several sand papers. The attachments were quick release and lock. The "look and feel" was solid, but light in weight...DISADVANTAGES.1. There were no defects experienced or problems during usage.
ToolChick
Reviewed in the United States on May 4, 2019
The media could not be loaded.
Ultra Trail Runner
Reviewed in the United States on October 4, 2019
I’m not the most skilled DIY’er, but I’m willing to take on certain repairs and small projects around the house that don’t require a lot of specialized skill/experience. I recently bought a home and figured having an oscillating tool on hand would prove useful on occasion, so I decided to buy one. I was deliberating between this one and the more powerful MM-50, but decided the MM-35 would suffice for occasional, lighter duty home use.The MM-35 performed well in the first (and thus far only) project that that I used it for which involved plunge cutting a 6”x6” square hole (using the included MM482 blade) through 2 layers of plywood (total thickness 1.5”) inside a built in cabinet so that I could install an exhaust cooling fan for my AV equipment. I traced out the hole that needed to be cut and found the MM-35 easy enough to handle to accurately cut along the lines that I traced. It took a little while to complete the task and there was definitely some vibration to be felt, but I’m pleased with the end result and how the tool performed overall. Perhaps the task may have been easier if I had purchased separately the MM452 blade, but I opted to go with the provided MM482 blade instead.It is worth noting that changing out the attachments on this model is a breeze as well.We’ll see how the MM-35 performs when I use it for other tasks, but my initial impressions are very positive and I’m glad I bought one.
Recommended Products
$180.76
$ 85 .99 $85.99
$79.99
$ 36 .99 $36.99