Your cart is empty.
Your cart is empty.Product Description
Fuel Pump Lock Ring Remove Tool
compatible with Toyota and Lexus.
- Compatible with Lexus GS 300 (2006); GS 350 (2007-2011); GS 430 (2006-2007); GS 460 (2007-2011);
- Compatible with Lexus GX 460 (2010-2013); GX 460 Premium (2014-2020); GX 460 Base (2014-2021); GX 460 Luxury (2018-2021);
- Compatible with Lexus GX 470 (2003-2009); GX 470 Gold (2004);
- Compatible with Lexus LX 570 5.7L (2008-2021);
- Compatible with Lexus RX 330 3.3L (2004-2006); RX 350 3.5L (2007-2021);
- Compatible with Lexus RX 450h (2013);
- Compatible with Toyota 4Runner 4.7L V8 4WD (2003-2009); 4Runner 4.0L V6 4WD (2004-2021); 4Runner 4.7L V8 2WD (2008-2009);
- Compatible with Toyota 4Runner 2.7L (2010); 4Runner 4.0L V6 2WD (2016-2018);
- Compatible with Toyota Corolla 1.8L AT, (2003-2016 excep 2004);
- Compatible with Toyota Corolla 1.8L MT, (2003-2016 excep 2004);
- Compatible with Toyota Corolla 2.4L AT, MT (2009-2010);
- Compatible with Toyota Corolla 1.8L CVT (2014-2019);
- Compatible with Toyota FJ Cruiser 4.0L V6 2WD (2007-2011); FJ Cruiser 4.0L V6 4WD (2007-2013);
- Compatible with Toyota Highlander 2.7L, 3.5L (2010-2019);
Perfect Fit
lock ring wrench have 9 slot, could tight stuck lock ring, has better grip than other tools that can slip off, it good pulls fuel pump rings or get the ring loose.
Easy To Use
1/2" drive ratchet or breaker bar will help you easy to remove the lock ring, but can't use impact tool.
Strong and Durable
lock ring remove tool made of high quality steel, not easy break and rust.
Customer
Reviewed in the United States on March 1, 2025
It's a perfect fit. Don't waste your money on the "universal" lock ring tools. A lot of people mentioned using cheater pipes or impacts but using a SHORT extension and socket worked well for me. 2009 Corolla
Shena
Reviewed in the United States on February 8, 2025
Worked awesome for the plastic lock ring on my 2011 scion TC. Very easy to remove fuel pump assembly with this tool. Definitely worth the money to do it the right way and not worry about breaking the fins off with a hammer and chisel. Would recommend for sure!
Alvin l. Abston
Reviewed in the United States on February 26, 2025
Works great with minimum effort
W. S. Stinefelt
Reviewed in the United States on February 22, 2025
If you are replacing a fuel pump on a 2010 Corolla, get this tool. I first tried a three prong remover, but it broke some of the plastic tabs on the fuel pump retainer ring. This tool has 9 contact points and worked like a charm. I applied a lot of force (with a 3 foot breaker bar) to loosen the retainer ring and break it loose. I’m glad I bought it and I recommend it.
Ian D.
Reviewed in the United States on January 24, 2025
The tool arrived in good condition. It worked perfectly for my 2008 Toyota Matrix fuel tank lid even after I broke some of the plastic edges off when I tried with a hammer and screwdriver.
G. B.
Reviewed in the United States on July 25, 2024
This tool fitted like a glove onto a Corolla 2007’s fuel pump assembly. Took 15 seconds to remove and another 15 seconds to re-install. No banging and no breaking. Worth every single pennies.
Scott
Reviewed in the United States on November 20, 2024
Well made, made easy work of fj cruiser fuel pump.
good
Reviewed in Canada on November 14, 2024
Without this and an impact wrench it is impossible to remove the ring!
sam
Reviewed in the United States on October 12, 2024
Product works great. Welds on the tool aren’t phenomenal, but they get the job done with a breaker bar.Couple tips. The tool doesn’t lock in, 360 degrees around the locking washer.There’s only 2 or 3 places where it’ll fully seat. You want to make sure it 100% slides into all of the grooves or it’ll slip. Once you get the tool seated, take the breaker bar and point it up, so you can tap the tool down into the lock washer a few times. Theres more than likely dirt and build up around the lip of the fuel tank. Do this a few times, and vacuum well around the tank before opening.I made some marks on the washer so I knew exactly where it needed to be tightened back to when re installing. Worked great!
zozapan
Reviewed in Canada on January 27, 2024
Pretty affordable at $36.75 CAD. I will update if it fail’s.
ravinder singh
Reviewed in Canada on April 25, 2024
Works good. Got the pump out first try.
Trent Hawkes
Reviewed in Canada on April 21, 2023
Perfect fit and very strong
Mr.Piments
Reviewed in Canada on December 24, 2022
Tried other U shape ajustable tools and ended up just braking the plastic fin’s but with this tool and a long breaker bar i was able to get the ring off !! What helps is that there is multiple contact points and it sit low on the ring. Had to be two person doing that job , one holding the tool firmly in place and the other working the breaker bar. Looks easy but believe me you will be happy you bought this instead of other ajustable U shape tool.
Recommended Products