Your cart is empty.
Your cart is empty.This evaporative emissions system pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Crown Victoria: 2006, 2007, 2008, 2009, 2010] - [Ford E-150: 2009, 2010] - [Ford E-250: 2009, 2010] - [Ford E-350 Super Duty: 2009, 2010] - [Ford Econoline Van: 2010] - [Ford Econoline Wagon: 2010] - [Ford Edge: 2010] - [Ford Escape: 2005, 2006, 2007, 2008] - [Ford Expedition: 2007, 2008] - [Ford Explorer Sport Trac: 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010] - [Ford Explorer: 2002, 2003, 2004, 2006, 2007, 2008, 2009, 2010] - [Ford Focus: 2003, 2004] - [Ford Freestar: 2004, 2005] - [Ford Fusion: 2007, 2008, 2009] - [Ford Mustang: 2005, 2006, 2007, 2010, 2011, 2012, 2013, 2014] - [Ford Ranger: 2000, 2001, 2002, 2003] - [Ford Taurus: 2008, 2009] - [Ford Windstar: 2001, 2002, 2003] - [Lincoln MKS: 2009] - [Lincoln MKX: 2010] - [Lincoln Navigator: 2007, 2008] - [Mercury Grand Marquis: 2006, 2007, 2008, 2009, 2010] - [Mercury Mariner: 2005, 2006, 2007, 2008] - [Mercury Milan: 2007, 2008, 2009] - [Mercury Monterey: 2004, 2005] - [Mercury Mountaineer: 2002, 2003, 2004, 2006, 2007, 2008, 2009, 2010] - [Mercury Sable: 2008, 2009]
Nicholas Graham
Reviewed in the United States on February 5, 2024
Purchasing this saved me up to $500 in garage charges
Nancy Whitehead
Reviewed in Canada on August 16, 2023
The product was faulty and couldn't be used.
Peter
Reviewed in the United States on July 17, 2023
I have an 04 F150 extended cab with the unfortunate molded pvc pipes and sensor all on one. Oem part is very hard and expensive to get. Aftermarket parts just have the sensor. This kit has everything you need. I was really happy with this and best of all I did it without dropping my fuel tank or cutting an access hole. Yes, its possible believe it or not... atleast on my Ford....I did it laying on the ground.... I had enough access to cut lines, install the compression fittings and the new sensor. All works great
Customer
Reviewed in the United Kingdom on June 27, 2023
I tried to find out if this would work on my 2007 mustang, but i got no answers so i took a risk, i installed it and can definitely say it works for my 2007 mustang, the fault has gone on my computer and the car is refilling the tank without any clicking!
howard
Reviewed in the United States on May 15, 2023
I bought this part about 3 years ago, at the time I researched for a fuel tank pressure sensor for 2005 expedition, said exact fit for my vehicle, had part installed now part has failed, reviewed passed orders. Found part to reorder, now says does not fit my vehicle, come to find out that the part was never correct the first time. That's why it failed so soon, buyers beware, do your research make sure the part is correct and correct for your vehicle, do not rely on Amazon's opinion that it's guarantee fit
Customer
Reviewed in Mexico on June 14, 2022
Todo comenzo desde que lo lleve a engrasar y el señor le daba duro y bonito con agua a presión. Autos con muchos sensores no es recomendable llevarlos a hacer eso porque arruinan lo electronico, ya aprendi y ya nunca lo llevo. mejor con trapito y a mano.Como mi auto es un modelo de mas de 10 años, algunas refacciones ya no se encuentran y en el caso del sensor de presión del tanque de combustible (FTP sensor) se debe comprar toda la manguera porque el sensor viene incluido. Estaba condenado a borrar los códigos de error antes de cada verificación en la CDMX porque es motivo de rechazo y no poder circular o comprar un auto nuevo. pero afortunadamente Dorman la fabrica y Amazon la vende. El manual de instalación esta mejor explicado en la página de internet de Dorman, esto por el cableado si se requiere cambiar conector. Yo los conecte al revés y lo tuve que corregir.Solo por llevar a la agencia te cobran 2000 o 3000 pesos, solo por revisar y ya no lo pueden reparar.
francisco escauriza
Reviewed in Germany on May 31, 2022
Best alternative to the oem, works perfectly. And the kit have everything you need..
misael
Reviewed in the United States on March 18, 2022
worked great, i did have a few pieces left over but the engine light went away so mission accomplished 👍🏽
Cameleon97
Reviewed in Canada on November 8, 2022
La hose est beaucoup trop pliée lorsqu'elle arrive...
Manny
Reviewed in the United States on November 21, 2022
The hoses and connectors are good but the sensor is defective. I went ahead and asked for a replacement , waited 2 days and installed it ,and the same problem persist.See the codes my scanner was reading were , P0455 and P0451 . It did fix the code P0455 ,because the sensor shows on my scanner's Live data , that its always under vacuum , showing a voltage of 4.2V even when the sensor is not vaccum pressure and the gas cap is off , it still shows 4.2V. So the sensor will take off the message on the instrument cluster that says (Check Gas Cap ) , but it will light up you check engine light with a code P0451 since the voltage does not vary during your drive cycle. It wont show up right away but it will show up after the car has cool down completely and warmed up a couple time in the process of its drive cycle. Therefore , the sensor is defective. Keep the hose adaptaion kit , but buy the oem sensor so you won't have the same problem.
Customer
Reviewed in the United States on March 17, 2021
Surprisedly enough yeah this fixed my problem kept getting check engine light everyone that scanned my car said it was a gas cap . After studying the evap components I realized the problem . Thanks guys great part at a good price , exel6 price I should say
tu hua
Reviewed in the United States on August 19, 2020
I love the product, reasonable price.
Mitchell
Reviewed in the United States on January 17, 2020
I used this to replace my fuel tank pressure sensor in a 2004 F150 (new body style). Not too fun dropping the fuel tank to get access, but once it was out this was easy to install. Kit includes fittings to splice the hard plastic fuel pressure vent tubing. I recommend pressurizing the tank with some compressed air to check for leaks (soapy water on connections bubble if its leaking) prior to re-installing.
Recommended Products
$36.12
$ 17 .99 $17.99